Search

In power system networks, automatic fault diagnosis techniques of switchgears with high accuracy and less time consuming are important. In this work, classification of abnormal location in switchgears is proposed using hybrid gravitational search algorithm (GSA)-artificial intelligence (AI) techniques. The measurement data were obtained from ultrasound, transient earth voltage, temperature and sound sensors. The AI classifiers used include artificial neural network (ANN) and support vector machine (SVM). The performance of both classifiers was optimized by an optimization technique, GSA. The advantages of GSA classification on AI in classifying the abnormal location in switchgears are easy implementation, fast convergence and low computational cost. For performance comparison, several well-known metaheuristic techniques were also applied on the AI classifiers. From the comparison between ANN and SVM without optimization by GSA, SVM yields 2% higher accuracy than ANN. However, ANN yields slightly higher accuracy than SVM after combining with GSA, which is in the range of 97%-99% compared to 95%-97% for SVM. On the other hand, GSA-SVM converges faster than GSA-ANN. Overall, it was found that combination of both AI classifiers with GSA yields better results than several well-known metaheuristic techniques. [ABSTRACT FROM AUTHOR]

An exponential increase in diverse load demand in the last decade has influenced the integration of more power plants into the power system. This increases the fault current due to the bidirectional flow of current, resulting in unwanted tripping of the relays if not properly coordinated. Therefore, it is imperative to ensure the installation of relays in the grid being able to sense the fault current from any direction (i.e. upstream or downstream). This can be accomplished by introducing an optimal directional overcurrent relay (DOCR) coordination scheme into the system. This paper presents an in-depth review of the applications of various optimization techniques for optimal coordination of directional overcurrent relays (DOCRs) in integrated power networks. The review highlights the advantages and limitations of techniques implemented to mitigate the DOCR coordination issues. Furthermore, potential research directions for optimal DOCR coordination are also discussed in this paper. [ABSTRACT FROM AUTHOR]

Network reconfiguration is a process to change the open-switches in distribution system for a minimum power loss. In the past, metaheuristic techniques were applied widely for network reconfiguration with consideration of a fixed loading profile. When the loading changes, the current configuration may not be the optimal one. Thus, the technique needs to be executed to find a new optimal configuration based on the latest loading. The process is time-consuming since metaheuristic techniques commonly require high computational times and produces inconsistent results. Therefore, this paper proposes a network reconfiguration technique based on artificial neural network (ANN) for variable loading conditions. The proposed ANN model is tested on IEEE 33-bus, IEEE 69-bus, and IEEE-118 bus systems. The test results indicate the efficiency of the proposed technique in three aspects: processing time, simple structure, and high accuracy. [ABSTRACT FROM AUTHOR]

Dissolved gas analysis (DGA) is commonly used to identify the fault type in power transformers. However, the available DGA methods have certain limitations because every method depends on the concentration of the dissolved gases. Therefore, in this work, hybrid feature selection-artificial intelligence-gravitational search algorithm (GSA) techniques were proposed to determine the fault type of power transformers based on DGA data. The artificial intelligence (AI) methods applied include support vector machine and artificial neural network. Both AI methods were optimised by GSA to enhance the accuracy of the results. Feature selections using stepwise regression and robust regression were applied to utilise only significant gases. The accuracy of the results was tested with various ratios of testing and training data. Comparison of the results using the proposed method with other optimisation methods and the previous works was performed to validate the performance of the proposed technique. It was observed that the proposed hybrid feature selection-AI-GSA technique yields reasonable accuracy although fewer types of dissolved gases were used. Therefore, the proposed method can be recommended for the application of automated power transformer fault type detection based on DGA data in practice. [ABSTRACT FROM AUTHOR]

Islanding detection is important for the protection of any distribution system connected to distributed energy resources (DER's). This study proposes an intelligent islanding detection technique based on artificial neural network (ANN) that employs minimal features from the power system. The accuracy of the trained ANN is improved by optimising the learning rate, momentum and number of neurons in the hidden layers using evolutionary programming (EP) and particle swarm optimisation (PSO). The performance comparison between stand-alone ANN, ANN-EP and ANN-PSO in the form of regression value is performed to obtain the best feature combination for an efficient islanding detection. The proposed technique is tested on- and off-line for various islanding and non-islanding events. The simulation results indicate that the proposed technique can successfully distinguish islanding from other non-islanding events such as load variation, capacitor switching, faults, induction motor starting and DER tripping. [ABSTRACT FROM AUTHOR]

It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA) has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN) and particle swarm optimisation (PSO) techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works. [ABSTRACT FROM AUTHOR]

The development of artificial intelligence (AI) based techniques for electricity price forecasting (EPF) provides essential information to electricity market participants and managers because of its greater handling capability of complex input and output relationships. Therefore, this research investigates and analyzes the performance of different optimization methods in the training phase of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) for the accuracy enhancement of EPF. In this work, a multi-objective optimization-based feature selection technique with the capability of eliminating non-linear and interacting features is implemented to create an efficient day-ahead price forecasting. In the beginning, the multi-objective binary backtracking search algorithm (MOBBSA)-based feature selection technique is used to examine various combinations of input variables to choose the suitable feature subsets, which minimizes, simultaneously, both the number of features and the estimation error. In the later phase, the selected features are transferred into the machine learning-based techniques to map the input variables to the output in order to forecast the electricity price. Furthermore, to increase the forecasting accuracy, a backtracking search algorithm (BSA) is applied as an efficient evolutionary search algorithm in the learning procedure of the ANFIS approach. The performance of the forecasting methods for the Queensland power market in the year 2018, which is well-known as the most competitive market in the world, is investigated and compared to show the superiority of the proposed methods over other selected methods. [ABSTRACT FROM AUTHOR]