Search

A prerequisite for decreasing the intensification of energy in buildings is to evaluate and understand the influencing factors of building energy performance (BEP). These factors include building envelope features and outdoor climactic conditions, among others. Based on the importance of the influencing factors in the development of the building energy prediction model, various researchers are continuously employing different types of factors based on their popularity in academic literature, without a proper investigation of the most relevant factors, which, in some cases, potentially leads to poor model performance. However, this can be due to the absence of an adequate comprehensive analysis or review of all factors influencing BEP ubiquitously. Therefore, this paper conducts a holistic and comprehensive review of studies that have explored the various factors influencing energy use in residential and commercial buildings. In total, 74 research articles were systematically selected from the Scopus, ScienceDirect, and Institute of Electrical Electronics Engineers (IEEE) databases. Subsequently, by means of a systematic and bibliometric analysis, this paper comprehensively analyzed several important factors influencing BEP. The results reveals the important factors (such as windows and roofs) and engendered or shed light on the application of some energy-efficient strategies such as the utilization of a green roof and photovoltaic (PV) window, among others. [ABSTRACT FROM AUTHOR]

The thermal properties of a building envelope are key indicators of the energy performance of the building. Therefore, methods are needed to determine quantities like the thermal transmittance (U-value) or heat capacitance in a fast, reliable way and with as little impact on the use of the building as possible. In this paper a technique is proposed that relies on a simplified electrical analogical model of building envelope components which can cover their dynamic thermal behavior. The parameters of this model are optimized to produce the best fit between simulated and measured outside surface temperatures. As the temperatures can be measured remotely with an infrared camera this approach requires significantly less installation effort and intrusion in the building than other methods. At the same time, a single measurement provides data for a large range of locations on a facade or a roof. The paper describes the method and a first experimental implementation of it. The experiment indicates that this method has the potential to produce results which have an accuracy that is comparable to standardized reference methods. [ABSTRACT FROM AUTHOR]

Energy consumption plays an important role in contemporary economies. Its significance extends beyond utilitarian value, impacting economic robustness, environmental protection, and residents' well-being. The escalating global energy requisites necessitate efficient energy utilization and a shift towards renewable sources to address climate change and strengthen energy independence. Developing accurate predictive models to forecast long-term energy costs and savings remains a complex problem. This paper aims to provide a methodology to identify the influence of building energy performance on real estate market efficiency, focusing on property maintenance costs. Real estate plays a crucial role in human life, serving both as a fundamental need and as a vehicle for achieving personal aspirations and secure financial investments, particularly during times of economic and social instability. Through interdisciplinary methodological architecture, this study addresses three key issues: the impact of rising energy costs on market efficiency, the responsiveness of the real estate market to energy price fluctuations, and the significance of property maintenance costs on market value. The research approach includes creating and applying AI algorithms capable of evaluating extensive datasets pertaining to real estate features. Utilizing machine learning methods, the algorithm determines the importance of energy efficiency measures as well as various other inherent and external attributes of properties. The suggested methodology provides a novel approach to improve the effectiveness of market efficiency analysis. [ABSTRACT FROM AUTHOR]

Enhancing energy efficiency in buildings plays a pivotal role in realizing the ambitious objective of achieving carbon neutrality by 2050, as outlined in the European Green Deal. Roofs represent the technical element most affected by energy phenomena related to heat transfer: in winter, roofing can lose up to 35% of heat, and the summer heat flux can even be higher. This paper provides a catalogue of optimized and sustainable solutions, with a specific focus on standardization and prefabrication principles, for enhancing the energy efficiency of the most prevalent types of roofs that characterize the national residential building heritage. The methodological approach that guided the research presented in this article was based on the identification and study of the most common roofings in the diverse national residential building heritage, followed by their classification according to their construction era. In the context of essential energy retrofitting of deteriorated residential building stock, 21 optimized standardized solutions have been identified. The outcome of performance evaluations of the proposed solutions allowed the implementation of a matrix that can be a valuable support for designers in selecting the most efficient precalculated and prefabricated solutions for the national residential building heritage based on energy performance and sustainability criteria. [ABSTRACT FROM AUTHOR]

This paper aims to investigate potential strategies to reduce energy consumption and environmental impacts of a recently converted rural complex into an agri-spa in a high environmental value area within the province of Viterbo (Italy). Actual operational data on appliances, climate, and energy consumption are employed for the energy audit. While this analysis generally provides energy-saving solutions, such options are not examined for their life cycle environmental impacts. The current article is based on the experimentation of a consolidated methodological approach in the scientific literature, integrating the energy audit, life cycle assessment (LCA), and economic analysis (Life Cycle Cost) to assess a series of energy-efficiency measures designed for the new wellness centre function. The combined use of these well-established procedures provides a comprehensive assessment of intervention scenarios for a particularly energy-intensive type of case study, not yet widely documented in the literature. The results reveal that energy consumption related to heating/cooling is marginal compared to the actual electrical consumption in the specific case study. Therefore, the most efficient scenarios involve installing photovoltaic systems and replacing gas boilers with high-efficiency heat pumps, especially with economically advantageous insulation. This leads to a 51% reduction in energy consumption and an 81% decrease in heating, DHW, and electricity costs. [ABSTRACT FROM AUTHOR]

The need to improve the sustainability of intensive livestock farming has led to an increasing adoption of Building Energy Simulation (BES) models for livestock houses. However, a consolidated body of knowledge specifically dedicated to these models is lacking in literature. This gap represents a significant obstacle to their widespread application and scalability in research and industry. The aim of this work is to pave the way for scaling the adoption of BES models for livestock houses by providing a comprehensive analysis of their application, development, and validation. For this aim, a systematic review of 42 papers—selected from over 795 results from the initial database query—is carried out. The findings underscored a growing body of research that involves BES models for different purposes. However, a common approach in both model development and validation is still lacking. This issue could hinder their scalability as a standard practice, especially in industry, also considering the limitations of BES models highlighted in this work. This review could represent a solid background for future research since provides an up-to-date framework on BES models for livestock houses and identifies future research opportunities. Moreover, it contributes to increasing the reliability of BES models for livestock houses by providing some recommendations for their validation. [ABSTRACT FROM AUTHOR]

The building and construction sector has a significant impact on the CO2 emissions and pollutants released into the atmosphere, which contribute to climate change. The EPDB Directive mandates the achievement of minimum energy class E for all residential buildings by 2030 and energy class D by 2033. Particularly, in Italy, about 86% of the existing building stock predates the enactment of any energy laws or regulations, making it imperative to apply the energy efficiency interventions. This paper provides a support decision tool for the identification of the standardized interventions in the building envelope, the air conditioning system, and domestic hot water production. This study is focused on a specific construction period class (1976–1990) in six different climatic zones. The methodological approach is based on a cataloguing phase and the definition of ante operam energy classes as well as on case study identification, energy requalification intervention identification, solution simulations, and cost estimation. By simulating the standardized interventions for each climatic zone, a range of possible combinations is identified. The most advantageous ones are determined based on a cost–benefit analysis considering the potential class jump achieved. The research result is a matrix of energy efficiency interventions that is applicable to each climatic zone and can be extended to the existing housing stock. [ABSTRACT FROM AUTHOR]

Digitalization offers new, unprecedented possibilities to increase the energy efficiency and improve the indoor conditions in buildings in a cost-efficient way. Smart buildings are seen by many stakeholders as the way forward. Smart buildings feature advanced monitoring and control systems that allow a better control of the buildings' indoor spaces, but it is becoming evident that the massive amount of data produced in smart buildings is rarely used. This work presents a long-term evaluation of a smart building testbed for one year; the building features state-of-the-art monitoring capability and local energy generation (PV). The analysis shows room for improving energy efficiency and indoor comfort due to non-optimal control settings; for instance, average indoor temperatures in all winter months were above 24 °C. The analysis of electricity and domestic hot water use has shown a relevant spread in average use, with single users consuming approximately four times more than the average users. The combination of CO2 and temperature sensor was sufficient to pinpoint the anomalous operation of windows in wintertime, which has an impact on energy use for space heating. Although the quantification of the impact of users on the overall energy performance of the building was beyond the scope of this paper, this study showcases that modern commercial monitoring systems for buildings have the potential to identify anomalies. The evidence collected in the paper suggests that this data could be used to promote energy-efficient behaviors among building occupants and shows that cost-effective actions could be carried out if data generated by the monitoring and control systems were used more extensively. [ABSTRACT FROM AUTHOR]

In this paper, we present the final results from the research project "Urban Abacus of Building Energy Performances (Abaco Urbano Energeticodegli Edifci–AUREE)" aimed at supporting the renovation process and energy efficiency enhancement of urban building stocks. The crux of the AUREE project is a Web–GIS GeoBlog portal with customized semantic dashboards aimed at sharing information on an urban built environment and promoting the participation of local stakeholders in its improvement. As the latest development of this research, a workflow that integrates the AUREE portal with BIM authoring and an open-source IoT platform is implemented and applied to an experimental case study concerning a public building in Carbonia (Italy). The headquarters of the Sotacarbo Sustainable Energy Research Center was selected as the case study. The presented results proved that it was possible to create a valid open system, which was accessible to both specialist and unskilled users, and aimed at guiding, through a progressive knowledge deepening, common end-users toward proper conscious "energy behaviors" as well as public administrations and decision-makers toward sustainable facility management. Later, the proposed open system could also be suitable to be used as an effective tool to support the rising "energy communities". [ABSTRACT FROM AUTHOR]

Occupant behavior controls a building's energy system to adapt the indoor environment, significantly increasing building energy consumption. Occupant behavior, which refers to the occupancy inside a building and their interaction with building systems (windows, blinds, thermostats, lighting and appliances, etc.), has been largely overlooked in building energy performance analysis. These factors make it essential to design sustainable buildings. It is widely acknowledged in the literature that there is an alarming performance gap between the estimated and actual energy consumption in buildings. This paper proposes a systematic literature review on energy-related occupant behaviors and their implications for energy performance. It aims to better understand occupant behavior, existing behavior modeling approaches and their limitations, and key influential parameters on building energy performance. It is based on a survey of ScienceDirect, Web of science and Scopus scientific databases, using their bibliometric analysis tools together with the VOSviewer software. Finally, this study identifies the following significant research gaps for future development: limitations of the generic and robust occupant behavior model; lack of actual data for validation; lack of research on different types of buildings (institutions, university buildings); limitations of considering all factors which influence occupant behavior; missing the detailed realistic situations of occupant behavior; integrating building information modeling (BIM) into building energy modeling. [ABSTRACT FROM AUTHOR]

To date, energy consumption in buildings accounts for a significant part of the total amount of energy consumed worldwide. The effect of ageing and degradation of various building components is one of the least studied reasons for the possible increase in energy consumed in buildings over time. In addition, there is a clear lack of practical guidelines that would help specialists take this factor into account. In this paper, an attempt is made to assess a possible change in the energy performance of buildings due to the degradation of their various components (insulated glass units, thermal insulation, airtightness, solar reflectivity of the building envelope, and photovoltaic modules). Detached and apartment buildings in hot-humid climates with reference to the United Arab Emirates (UAE) were considered. The study was based on simulation research using EnergyPlus, in which the initially collected data on the possible deterioration of the properties of various building components was used for dynamic thermal simulation of selected buildings. The results showed an increase in energy consumption for cooling in detached houses might reach up to 9.53–38.4% over 25 years for more airtight and insulated buildings and 12.28–34.93% for less airtight and insulated buildings. As a result, certain patterns of changes in energy consumption for cooling buildings were established, based on which a set of guidelines was developed. These guidelines can help specialists in various fields better understand the trends in the energy performance of buildings under the influence of degradation processes and take appropriate measures. [ABSTRACT FROM AUTHOR]

The energy performance prediction of buildings plays a significant role in the design phases. Theoretical analysis and statistical analysis are typically carried out to predict energy consumption. However, due to the complexity of the building characteristics, precise energy performance can hardly be predicted in the early design stage. This study considers both building information modeling (BIM) and statistical approaches, including several regression models for the prediction purpose. This paper also highlights a number of findings of energy modeling related to building energy performance simulation software, particularly Autodesk Green Building Studio. In this research, the geometric models were created using Autodesk Revit. Based on the energy simulation conducted by Autodesk Green Building Studio (GBS), the energy properties of five prototype and case study models were determined. The GBS simulation was carried out using DOE 2.2 engine. Eight parameters were used in BIM, including building type, location, building area, analysis year, floor-to-ceiling height, floor construction, wall construction, and ceiling construction. The Monte Carlo simulation method was performed to predict precise energy consumption. Among the regression models developed, the single variable linear regression models appear to have high accuracy. Although there exist some limitations in applying the equation in EUI prediction, the rough estimation of energy use was realized. Regression model validation was carried out using the model from the case study and Monte Carlo simulation results. A total of 35 runs of validation were performed, and most differences were maintained within 5%. The results show some limitations in the application of the linear regression model. [ABSTRACT FROM AUTHOR]

Buildings account for a large portion of the total energy use in the US; therefore, improving the operation of typical variable-air-volume (VAV) systems in buildings can provide a tremendous economic opportunity. ASHRAE Guideline 36 recommends a resetting strategy for supply air temperature (SAT) for VAV systems based on outside air temperature. However, this strategy may not produce optimal performance, particularly when simultaneous cooling and heating occurs in zones. In addition, there is no strategy recommended in the Guideline to reset the zone minimum airflow set point in a single-duct VAV terminal unit with reheat, although this setpoint has a great impact on zone reheat requirements and ventilation efficiency. Thus, this paper introduces new strategies to reset both the SAT and zone minimum airflow rate set points to improve the efficiency of typical VAV systems. The strategies were tested under various conditions through experiments performed in fully instrumented VAV systems located in the HVAC lab at the University of Cincinnati. The experiments were conducted on a chilled-water VAV system that serves three controlled zones with hot-water reheat VAV boxes controlled by a typical commercial BACnet web-based building automation system BAS. The simulation studies were performed using the building energy simulation software EnergyPlus to evaluate the strategies at a larger scale in various locations. The simulation results show that the proposed resetting strategies can provide fan energy savings between 1.6% and 5.7% and heating load savings between 7.7% to 33.7%, depending on the location. The laboratory testing shows that the proposed strategies can provide stable control performance in actual systems as well as achieving the anticipated reheat and fan energy savings. The result offers significant improvements that can be implemented in the Guideline for single-duct VAV system operation and control. [ABSTRACT FROM AUTHOR]

A rise in the number of EVs (electric vehicles) in Europe is putting pressure on power grids. At an urban scale, Positive Energy Districts (PEDs) are devised as archetypes of (small) urban districts managing a set of interconnected buildings and district elements (lighting system, vehicles, smart grid, etc.). This paper offers a comprehensive analysis of the impact of e-mobility in a PED, simulated using MATLAB-Simulink software. The PED, a small district in northern Spain, is assessed in five scenarios representing varying requirements in terms of energy efficiency of buildings, type of street lighting and number of EVs. The results suggest that the energy rating of the buildings (ranging from A for the most efficient to E) conditions the annual energy balance. A PED with six interconnected buildings (3 residential and 3 of public use) and 405 EVs (as a baseline) only achieves positivity when the buildings have a high energy rating (certificate A or B). In the most efficient case (A-rated buildings), simulation results show that the PED can support 695 EVs; in other words, it can provide nearly 9 million green kilometres. This result represents a potential 71% saving in carbon emissions from e-mobility alone (as compared to the use of fossil-fuel vehicles), thus contributing a reduction in the carbon footprint of the district and the city as a whole. [ABSTRACT FROM AUTHOR]

Featured Application: Optimization of passive solar strategies to minimize building energy demand. Passive solar system design is an essential asset in a zero-energy building perspective to reduce heating, cooling, lighting, and ventilation loads. The integration of passive systems in building leads to a reduction of plant operation with considerable environmental benefits. The design can be related to intrinsic and extrinsic factors that influence the final performance in a synergistic way. The aim of this paper is to provide a comprehensive view of the elements that influence passive solar systems by means of an analysis of the theoretical background and the synergistic design of various solutions available. The paper quantifies the potential impact of influencing factors on the final performance and then investigates a case study of an existing public building, analyzing the effects of the integration of different passive systems through energy simulations. General investigation has highlighted that latitude and orientation impact energy saving on average by 3–13 and 6–11 percentage points, respectively. The case study showed that almost 20% of the building energy demand can be saved by means of passive solar systems. A higher contribution is given by mixing direct and indirect solutions, as half of the heating and around 25% of the cooling energy demand can be cut off. [ABSTRACT FROM AUTHOR]

The thermal properties of a building envelope are key indicators of the energy performance of the building. Therefore, methods are needed to determine quantities like the thermal transmittance (U-value) or heat capacitance in a fast, reliable way and with as little impact on the use of the building as possible. In this paper a technique is proposed that relies on a simplified electrical analogical model of building envelope components which can cover their dynamic thermal behavior. The parameters of this model are optimized to produce the best fit between simulated and measured outside surface temperatures. As the temperatures can be measured remotely with an infrared camera this approach requires significantly less installation effort and intrusion in the building than other methods. At the same time, a single measurement provides data for a large range of locations on a facade or a roof. The paper describes the method and a first experimental implementation of it. The experiment indicates that this method has the potential to produce results which have an accuracy that is comparable to standardized reference methods.

Bifacial photovoltaic sunshade (BiPVS) is an innovative building-integrated photovoltaic (BIPV) technology. Vertically mounted BiPVS is capable of converting part of the incident solar radiation into electricity, regulating the indoor heat gain from solar penetration and improving daylighting. An excellent BiPVS design should comprehensively consider its impact on building performance and economic viability. This study aims to address this issue by proposing a parametric design-based multi-objective optimization (MOO) framework to maximize indoor useful daylight illuminance, minimize air-conditioning energy consumption, and shorten the payback period by optimizing BiPVS design parameters. The framework utilizes the Ladybug, Honeybee, and Wallacei plugins on the Rhino-Grasshopper simulation platform. It validates the optimization potential of BiPVS in a typical office located in a hot summer and warm winter zone. The results indicate that BiPVS has significant energy-saving and daylighting potential. Compared to the baseline model without BiPVS, useful daylight illuminance is increased by 39.44%, air-conditioning energy consumption is reduced by 12.61%, and the economically satisfactory payback period is 4.80 years. This study provides a practical solution for the competing objectives of daylighting and energy saving in buildings with significant renewable energy utilization. The developed framework is highly efficient and versatile and can be applied to other BIPV designs, which benefits the realization of carbon-neutral goals in the building sector. [ABSTRACT FROM AUTHOR]

Lack of effective collaboration among energy-related stakeholders is considered as a critical factor that affects building energy performance. Although previous studies have explored energy-related stakeholders' collaboration behavior, there is still a lack of simulation model that can be easily used for collaboration analysis with the consideration of dynamic nature, generality and practicability. To fill this gap, a hybrid dynamic model with the combination of system dynamic and agent-based modeling was developed in this study. Strict model structure tests and model behavior tests were conducted to validate the proposed model. To demonstrate the use of the hybrid model, a tentative exploration of the collaboration among stakeholders was presented. The simulation results showed that (1) a single policy of government subsidies has some limitations for promoting collaboration and improving building energy performance; (2) technical innovation can improve not only the rate but also the quality of collaboration; (3) the effect of long-term gain on collaboration and the building energy performance is sustained; (4) the penalties has an upper limit to reduce the building energy performance gap; (5) the integrated effect on the building energy performance may be less significant than that of the simple sum of each strategy; and (6) there is an incremental and then decreasing marginal utility of integrated strategies. The hybrid model provides quantitative research methods to better analyze the collaboration among energy-related stakeholders. Both the dynamic collaboration decision process and the bounded rationality of stakeholders have been considered. [ABSTRACT FROM AUTHOR]

In response to escalating energy demands and global warming concerns, the Passive House Standard has emerged as a solution in residential construction, aiming to drastically reduce energy consumption and operational costs primarily through high-performance building envelopes. While a considerable volume of the literature has focused on the Passivhaus Institute (PHI) standards, predominantly in European contexts, there is a gap in research on the Passive House Institute US (Phius) standards, particularly in North American climates. This study conducts a quantitative comparative analysis of two adjacent multifamily residential buildings in Central Pennsylvania, Climate Zone 5A—one built using conventional construction methods and the other following Passive House (PHIUS+ 2015) certification standards—to validate the energy efficiency improvements attributed to Passive House designs. A comparative analysis of the whole building energy use over two years reveals that the Passive House building consumes approximately 50% less energy than its conventional counterpart in terms of whole building energy use and the national median recommended benchmark metric defined by the Energy Star Portfolio Manager. These findings emphasize the potential for significant energy savings and greenhouse gas reductions in residential buildings, highlighting the necessity for policymakers and governments to incentivize the adoption of Passive House standards to achieve environmental sustainability and reduce energy costs for society. [ABSTRACT FROM AUTHOR]

Several studies have demonstrated the capability of data-driven modelling based on on-site measurements to characterise the thermal performance of building envelopes. Currently, such methods include steady-state and dynamic heating experiments and have mainly been applied to scale models and unoccupied test buildings. Nonetheless, it is proposed to upscale these concepts to characterise the thermal performance of in-use buildings based on on-board monitoring (OBM) devices which gather long-term operational data (e.g., room temperatures, gas and electricity consumption...). It remains, however, to be proven whether in-use data could be a cost-effective, practical and reliable alternative for the dedicated tests whose more intrusive measurements require on-site inspections. Furthermore, it is presently unclear what the optimal experimental design of the OBM would be and which data analysis methods would be adequate. This paper presents a first step in bridging this knowledge gap, by using on-board monitoring data to characterise the overall heat loss coefficient (HLC) [W/K] of an occupied, well-insulated single-family house in the UK. With the aid of a detailed building physical framework and specifically selected data subsets a sensitivity analysis is carried out to analyse the impact of the measurement set-up, the duration of the measurement campaign and the applied data analysis method. Although the exact HLC of the building is unknown and no absolute errors could hence be calculated, this paper provides a new understanding of the decisions that have to be made during the process from design of experiment to data analysis. It is demonstrated that such judgements can lead to differences in the mean HLC estimate of up to 89.5%. [ABSTRACT FROM AUTHOR]

Abstract In the last decades, European countries have provided for stringent energy requirements for new buildings. In improving the energy performance of buildings, windows play a significant role as they largely influence the energy need. The windows design should base on the balanced trade-off between the solar heat gains and the heat transfer by transmission. In the paper, for some Italian climatic zones, the relation between the optimal window-to-wall ratio (WWR) and the energy need in residential nearly zero-energy buildings (nZEBs) is investigated. In the case studies, the envelope thermo-physical properties are consistent with the nZEB requirements established at national level. The energy performance assessment is carried out by means of a detailed dynamic simulation tool (EnergyPlus). The influence of different orientations and sizes of windows on the energy performance and the peak power are studied. The paper analyses the effect of WWR in the design of nZEBs. [ABSTRACT FROM AUTHOR]

Inequities in the built environment have long persisted in communities around the world. Prior studies have exposed that energy retrofit programs invest inequitably in residential buildings, leaving racial minorities with disproportionately less energy inefficient homes, regardless of income level. This inequity in energy performance and retrofit investments has yet to be studied for commercial and institutional buildings. Further research has shown that tree canopy coverage and vegetation is less dense in historically disadvantaged communities, contributing to a greater urban heat island effect and corresponding higher energy consumption for cooling compared to historically advantaged communities. Moreover, there is limited albeit emerging research that utilizes granular socioeconomic data with fine temporal scale energy consumption data to help identify energy inequalities among race and income groups. This paper examines the differential impact of energy efficiency retrofit installation on energy performance between advantaged vs. disadvantaged groups using data from U.S. public school buildings. Additionally, it studies how the effect of retrofits is compounded by the presence of vegetation surrounding the building. Utilizing hourly interval smart meter data from primary and secondary school buildings in California, the impact of retrofits are quantified using three energy metrics. Then the disparities in retrofit impact for advantaged vs. disadvantaged groups (as defined by three equity metrics) are evaluated using school-level demographic data. Lastly, regression on the percent change in monthly energy consumption from the pre-retrofit to post-retrofit period is used to quantify the incremental benefits of retrofits compounded by vegetation. Findings show that energy efficiency retrofits can improve energy performance and reduce energy inequities. Specifically, retrofits significantly increase energy efficiency and reduce the energy efficiency equity gap by up to 198%. Evidence shows that vegetation surrounding a building has a synergistic effect with mechanical retrofits for reducing energy consumption in respect to reduced cooling loads, even in cases where mechanical retrofits alone resulted in significant increases in energy consumption. Dense vegetation provides around 6% energy savings, similar in magnitude to savings from mechanical retrofit installation. This validates the effectiveness of retrofits for reducing energy consumption and improving energy equity, and demonstrates the ability of vegetation to provide additional energy savings beyond mechanical interventions. [ABSTRACT FROM AUTHOR]

Operational building energy consumption accounts for 55% of global energy consumption. Most of this is attributed to residential buildings, as they make up the largest building type when compared to the total building stock worldwide. As the building envelope is a major contributor to building energy performance, especially the external walls, its optimisation is therefore imperative to reduce energy consumption and carbon emissions. This study set out to assess the effects of waste material additions to external walls and their effect on building energy performance. This research aimed to critically investigate the effect of rice husk ash (RHA) masonry blocks on building energy performance when compared to conventional masonry blocks in tropical climates. A mix of methods, including experimental investigation and simulation studies, were employed for this study. Three variations of RHA block samples were created for this investigation: RHA 5%, RHA 10%, and RHA 15%. Using prototype buildings from the study context, the building simulation results helped quantify the impact on building energy performance from the reuse of rice waste. The largest improvement to the building fabric was recorded with the RHA15% blocks, which resulted in a 9.9% and 11.3% reduction in solar heat gains through the external walls for the selected bungalow and duplex/storey building, respectively. This resulted in a 6.55% and 4.2% reduction in cooling loads and a 4.1% and 2.8% reduction in carbon emissions, respectively, for the bungalow and duplex/storey building. The findings of this research will prove valuable to householders, researchers, architects, and policymakers in their decision-making processes. The findings will also be useful in introducing new methods that can be adopted for similar studies, bridging the knowledge gap while promoting a circular economy through the reuse of landfilled waste. [ABSTRACT FROM AUTHOR]

• A BIM-supported energy performance analysis for green building design is proposed. • This systematic analytical framework integrates explainable machine learning and multi-objective optimization. • It can serve as a data-driven decision tool to guide green building development even under uncertainty. • The top important features that greatly affect the building energy performance can be quantitatively identified. • Building energy performance can be improved by 13.43% using the obtained optimal strategy. Supported by the combination of the advanced BIM technique with intelligent algorithms, this paper develops a systematic framework using explainable machine learning and multi-objective optimization to realize the automatic prediction and optimization of building energy performance towards the sustainable development goal. There are three critical parts incorporated, including the DesignBuilder simulation, BO-LGBM (Bayesian optimization-LightGBM) and an explainable method SHAP (SHapley Additive explanation)-based prediction and explanation of building energy performance, and AGE-MOEA algorithm-based multi-objective optimization (MOO) under sources of uncertainty. It has been verified in a case study for green building design. Results show that: (1) The predictive BO-LGBM model can make a highly precise prediction in agreement with the simulation data, reaching up the R2 larger than 93.4% and MAPE smaller than 2.13%. From the SHAP calculation, features related to the HAVC (Heating Ventilation and Air Conditioning) system tend to contribute more to affecting the prediction results. (2) The AGE-MOEA-based optimization can identify a set of Pareto optimal solutions in simultaneously minimizing the building energy consumption, CO 2 emission, and indoor thermal discomfort degree, arriving at the highest optimization rate of 13.43% under proper adjustment of certain features. (3) In the MOO task, the consideration of model and data uncertainty by prediction intervals and Monte-Carlo simulation can further increase the optimization rate by around 4.0% than the deterministic scenario, resulting in more desired strategies in optimizing the green building performance. In short, this paper enriches the area of green building development. For one thing, it raises the transparency and interpretability of machine learning to make the prediction more convincing. For another, it efficiently determines the passive and active design solutions along with the detailed profile of influential factors for green building design. [ABSTRACT FROM AUTHOR]

Manual solar shades rely on occupants’ control and thus its energy performance is highly related to occupants’ behavior. This paper conducted a co-simulation study on the impact of shade behavior on building energy performance and its uncertainty at different window-to-war ratios (WWRs). A previously developed stochastic behavior model for manual solar shades is used in this paper. Results show that energy uncertainty increases from 1.8% to 3.5% as WWR increases from 25% to 90% and a linear regression was given for predicting energy uncertainty with a determination coefficient of 0.9595. Whether energy uncertainty due to stochastic shade behavior has a significant impact on total energy performance depends on WWR design. To have a high and robust building performance, a small WWR that meets minimum daylighting performance is suggested for office buildings in this climate region. For a more accurate simulation of manual shades, a better consideration of manual shades than existing simplified assumptions by building energy regulations/standards is required.

The gap between the intended and actual energy performance of buildings is increasingly well documented in the non-domestic building sector. Recognition of this issue has led to the availability of a large range of initiatives that seek to ensure energy efficient building operation. This article reviews the practical implementation of three such initiatives in a case study building at the University of Cambridge. The notionally high-performance office/laboratory building implemented two voluntary design frameworks during building planning and construction: the voluntary rating scheme BREEAM and a bespoke Soft Landings framework called the CambridgeWork Plan. The building additionally meets the energy reporting criteria for the EU Energy Performance of Buildings Directive (EPBD), a legislative requirement for many publicly owned buildings in the UK. The relative impact of these three approaches for optimising building energy performance is reviewed through a mixed methods approach of building occupant and operator interviews, document analysis and energy performance review. The building's core functions were revealed to consume 140% more energy than the building logbook estimate for the same needs. This difference, referred to widely as the energy performance gap, is larger than the majority of reported UK university buildings in the energy reporting database CarbonBuzz. The three implemented initiatives are demonstrated to be inadequate for reducing the energy performance gap in the case study, thus a number of alternative energy efficiency approaches are additionally reviewed. Common to the three approaches used in the case study is a lack of verification of actual building performance despite ambitious sustainability targets, due to a heavy focus on the design-stage and few follow-up mechanisms. The paper demonstrates the potential of energy efficiency initiatives that are focussed on operational performance as a core criterion (such as the Living Building Challenge) together with those that ensure the creation of realistic energy estimates at the design stage (such as the Chartered Institution of Building Services Engineers (CIBSE) Technical Memorandum 54). [ABSTRACT FROM AUTHOR]

[Display omitted] • Present a comprehensive review of building electricity profile models. • Distinguish the differences of building electricity profile and prediction models. • Categorize the statistical and bottom-up models for electricity use profiles. • Investigate the validation metrics in accordance with the modeling methods. • Discuss the key future perspectives of building electricity profile analysis. The building sector contributes significantly to overall energy consumption and carbon emissions. Improving renewable energy utilization in buildings is of considerable importance for their carbon neutrality. Electricity is expected to become the major form of final energy consumption in buildings; as such, understanding the features of building electricity use profiles is pivotal for building energy system design and city-scale electricity distribution network planning. This study reviews the current status and future challenges of building electricity use profile models. The paper distinguishes between electricity use profile models and electricity use prediction models. Then it comprehensively reviews current research papers, focusing on four aspects, including the temporal and spatial distribution of datasets, the distinction between statistical and bottom-up modeling methods, mathematical and engineering domain validation metrics, and applications in building energy system design and energy policy making. Key perspectives for future research are discussed in the paper, including the temporal scales of models, the aggregation of electricity use profiles, occupant-driven environment-interactive model structures, as well as the fit-for-purpose model evaluation. This is intended to inform and inspire future research on building electricity use profiles, improve the in-depth understanding and quantitative descriptions of building electricity use, and support the design of future building systems and energy distribution networks. [ABSTRACT FROM AUTHOR]

Digitalization offers new, unprecedented possibilities to increase the energy efficiency and improve the indoor conditions in buildings in a cost-efficient way. Smart buildings are seen by many stakeholders as the way forward. Smart buildings feature advanced monitoring and control systems that allow a better control of the buildings’ indoor spaces, but it is becoming evident that the massive amount of data produced in smart buildings is rarely used. This work presents a long-term evaluation of a smart building testbed for one year; the building features state-of-the-art monitoring capability and local energy generation (PV). The analysis shows room for improving energy efficiency and indoor comfort due to non-optimal control settings; for instance, average indoor temperatures in all winter months were above 24 °C. The analysis of electricity and domestic hot water use has shown a relevant spread in average use, with single users consuming approximately four times more than the average users. The combination of CO2 and temperature sensor was sufficient to pinpoint the anomalous operation of windows in wintertime, which has an impact on energy use for space heating. Although the quantification of the impact of users on the overall energy performance of the building was beyond the scope of this paper, this study showcases that modern commercial monitoring systems for buildings have the potential to identify anomalies. The evidence collected in the paper suggests that this data could be used to promote energy-efficient behaviors among building occupants and shows that cost-effective actions could be carried out if data generated by the monitoring and control systems were used more extensively.

Stakeholders such as urban planners and energy policymakers use building energy performance modeling and analysis to develop strategic sustainable energy plans with the aim of reducing energy consumption and emissions from the built environment. However, inconsistent energy data and the lack of scalable building models create a gap between building energy modeling and traditional planning practices. An alternative approach is to conduct a large-scale energy usage survey, which is time-consuming. Similarly, existing studies rely on traditional machine learning or statistical approaches for calculating large-scale energy performance. This paper proposes a solution that employs a data-driven machine learning approach to predict the energy performance of urban residential buildings, using both ensemble-based machine learning and end-use demand segregation methods. The proposed methodology consists of five steps: data collection, archetype development, physics-based parametric modeling, machine learning modeling, and urban building energy performance analysis. The devised methodology is tested on the Irish residential building stock and generates a synthetic building dataset of one million buildings through the parametric modeling of 19 identified vital variables for four residential building archetypes. As a part of the machine learning modeling process, the study implemented an end-use demand segregation method, including heating, lighting, equipment, photovoltaic, and hot water, to predict the energy performance of buildings at an urban scale. Furthermore, the model's performance is enhanced by employing an ensemble-based machine learning approach, achieving 91% accuracy compared to the traditional approach's 76%. Accurate prediction of building energy performance enables stakeholders, including energy policymakers and urban planners, to make informed decisions when planning large-scale retrofit measures. • Utilization of ensemble-based machine learning modeling. • Implementation of an end-use demand segregation. • Identification of key building features for each end-use demand prediction. • Analysis of the impact of retrofit measures using future weather data. [ABSTRACT FROM AUTHOR]

Purpose: Due to the large quantity of data that are recorded in energy efficient buildings, understanding the behavior of various underlying operations has become a complex and challenging task. This paper proposes a method to support analysis of energy systems and validates it using operational data from a cold water chiller. The method automatically detects various operation patterns in the energy system. Methods: The use of k-means clustering is being proposed to automatically identify the On (operational) cycles of a system operating with a duty cycle. The latter's data is subsequently transformed to symbolic representations by using the symbolic aggregate approximation method. Afterward, the symbols are converted to bag of words representation (BoWR) for hierarchical clustering. A gap statistics method is used to find the best number of clusters in the data. Finally, operation patterns of the energy system are grouped together in each cluster. An adsorption chiller, operating under real life conditions, supplies the reference data for validation. Results: The proposed method has been compared with dynamic time warping (DTW) method using cophenetic coefficients and it has been shown that the BoWR has produced better results as compared to DTW. The results of BoWR are further investigated and for finding the optimal number of clusters, gap statistics have been used. At the end, interesting patterns of each cluster are discussed in detail. Conclusion: The main goal of this research work is to provide analysis algorithms that automatically find the various patterns in the energy system of a building using as little configuration or field knowledge as possible. A bag of word representation method with hierarchical clustering has been proposed to assess the performance of a building energy system. [ABSTRACT FROM AUTHOR]

Despite the multiple advantages of prefabricated compared to conventional buildings, such as significant reductions in cost and time, improved quality and accuracy in manufacture, easy dismantling and reuse of components, reduction in environmental degradation, increase of productivity gains, etc., they still share a small part of the European building stock, mainly in the Mediterranean. This paper attempts to highlight the potential of prefabricated buildings to achieve advanced levels of performance, particularly as regards their thermal and energy behavior. More specifically, in this paper the energy needs of a single-family building constructed with prefabricated elements is analyzed, considering different climate contexts. The prefabricated elements comprising the building envelope were developed in order to address specific requirements with respect to their structural, hygrothermal, energy, fire, acoustical, and environmental performance, within the research project SUPRIM (sustainable preconstructed innovative module). The new multifunctional building element, also incorporating phase change materials for increased latent thermal heat storage, has been proven to be beneficial in all the examined climate zones. The results of the relevant studies will highlight the contribution of the new prefabricated element to the sustainability of the overall construction, as well as its advantages when compared with conventional constructions. [ABSTRACT FROM AUTHOR]

Urban expansion, driven by population and economic growth, has been a major contributor to increased levels of energy consumption across the globe. Beirut, Lebanon's capital, is no exception in facing a surge in its demand for electricity as it expands. However, with frequent power outages, underpinning a largely problematic power sector, Beirut's demand for electricity is becoming a real hurdle that impedes the city's economic growth and development. This paper introduces a near-city-scale building energy model, BEirut Energy Model BEEM, which estimates the building stock's electricity consumption in two different districts in Beirut. The methodology uses rule-based expert data for an archetypal classification of the buildings based on their functions and periods of construction with their corresponding attributes including the number of floors, number of apartments, and bimonthly electricity consumption to generate a 3D model for 3630 buildings coupled to the hourly weather conditions and topographic map, which is then simulated in EnergyPlus. The predicted consumption of 2311 buildings is then calibrated with actual available metered data, to adapt the model to Beirut's occupancy and users' behaviors. Calibrated results are mapped to reveal the spatiotemporal distribution of energy peak demands which provide insights for future interventions. An analysis of the spatial distribution of electricity use demonstrates a spatial clustering that underlies urban energy demand which can be used for smart grid zoning. [ABSTRACT FROM AUTHOR]

Buildings' contribution to global final energy use is about 30%, which makes them a primary focus for implementing energy-efficient measures. Building energy efficiency is an important consideration for residential buildings due to the significant environmental impact of energy consumption and the rising cost of energy. Estimating and optimizing a building's energy performance is an efficient method to reduce its environmental impact and cost. There exists a lack of accuracy in estimating the energy performance of a building due to approximations in the monitored data as well as a lack of consideration for occupants' energy use behavior. This study aimed to develop a comprehensive framework that assists in accurately estimating building energy performance considering occupants' energy use behavior. The framework proposed a scheme to collect occupant behavior data, such as occupancy patterns, appliance usage, and lighting conditions, through a living-lab setup and developing an occupants' behavior model that was utilized for more accurate building energy modeling and performance analysis. [ABSTRACT FROM AUTHOR]

Earth-to-air heat exchangers (EAHEs) can be used in the ventilation systems of various types of buildings. Multipipe structures can be found in large-volume buildings, yet scientific analysis of such systems is rare. Annual energy gains and electricity consumption for equivalent single-pipe and multipipe systems are typically not available. This paper bridges this gap, presenting the results of experimental studies on pressure losses in three-, five- and seven-pipe EAHEs and analysis for the annual energy gains and electric energy consumption as compared to a single-pipe exchanger. The results showed that the multipipe EAHE can be successfully replaced by a single-pipe structure with the same thermal performance and similar pressure losses if a tube with the appropriate diameter is used. However, multipipe heat exchangers can also use pipes of larger diameter (manifolds and/or branches), which improves their energy efficiency and may then make them more advantageous than single-pipe structures. From this reason, ultimately, the final selection of exchanger geometry should take into account economic and environmental issues and also user preferences and their importance in the hierarchy. [ABSTRACT FROM AUTHOR]

The paper presents an analysis of the application of an air-to-water electric compressor heat pump (AWHP) for the recovery of waste heat from the exhaust air in a typical multifamily residential building and the use of this heat for space heating, as well as the impact of this solution on the building energy performance (the PPR index). Simulations were performed in TRNSYS for five locations in Poland (Koszalin, Wrocław, Lublin, Białystok, Suwałki), for various heating system parameters (80/60 °C, 75/65 °C, 70/50 °C, 55/45 °C, 35/28 °C), for various temperature limitations of heat pump operation. It was shown that the analyzed system has great potential from an energy and environmental point of view. It can provide significant benefits in terms of the energy performance of the building, depending on the system parameters. The results show that the most energy-efficient system is the one with the lowest heating system temperatures. Moreover, implementing a temperature limitation on the heat pump operation improves its efficiency, but the higher the design parameters of the heating installation and the lower the limitation, the lower the heat pump contribution, and the higher the SCOP and the PPR. The energy effect is also influenced by location, but its scale depends on the parameters of the heating system and the temperature limitation of the heat pump's operation. It is more significant for lower heating system parameters. This system enables the possibility of further reducing the demand for nonrenewable primary energy by powering the heat pump with photovoltaic cells. [ABSTRACT FROM AUTHOR]

Passive solar system design is an essential asset in a zero-energy building perspective to reduce heating, cooling, lighting, and ventilation loads. The integration of passive systems in building leads to a reduction of plant operation with considerable environmental benefits. The design can be related to intrinsic and extrinsic factors that influence the final performance in a synergistic way. The aim of this paper is to provide a comprehensive view of the elements that influence passive solar systems by means of an analysis of the theoretical background and the synergistic design of various solutions available. The paper quantifies the potential impact of influencing factors on the final performance and then investigates a case study of an existing public building, analyzing the effects of the integration of different passive systems through energy simulations. General investigation has highlighted that latitude and orientation impact energy saving on average by 3–13 and 6–11 percentage points, respectively. The case study showed that almost 20% of the building energy demand can be saved by means of passive solar systems. A higher contribution is given by mixing direct and indirect solutions, as half of the heating and around 25% of the cooling energy demand can be cut off.

Energy consumption plays an important role in contemporary economies. Its significance extends beyond utilitarian value, impacting economic robustness, environmental protection, and residents’ well-being. The escalating global energy requisites necessitate efficient energy utilization and a shift towards renewable sources to address climate change and strengthen energy independence. Developing accurate predictive models to forecast long-term energy costs and savings remains a complex problem. This paper aims to provide a methodology to identify the influence of building energy performance on real estate market efficiency, focusing on property maintenance costs. Real estate plays a crucial role in human life, serving both as a fundamental need and as a vehicle for achieving personal aspirations and secure financial investments, particularly during times of economic and social instability. Through interdisciplinary methodological architecture, this study addresses three key issues: the impact of rising energy costs on market efficiency, the responsiveness of the real estate market to energy price fluctuations, and the significance of property maintenance costs on market value. The research approach includes creating and applying AI algorithms capable of evaluating extensive datasets pertaining to real estate features. Utilizing machine learning methods, the algorithm determines the importance of energy efficiency measures as well as various other inherent and external attributes of properties. The suggested methodology provides a novel approach to improve the effectiveness of market efficiency analysis.

Highlights • Create city-specific energy performance grading model using city disclosure data. • Method to grade buildings that is interpretable, reproducible, scalable, and robust. • Develop a clustering algorithm to grade buildings on performance. • Validated approach demonstrates significant improvements over current methods. Abstract As the effects of anthropogenic climate change become more pronounced, local and federal governments are turning towards more aggressive policies to reduce energy use in existing buildings, a major global contributor of carbon emissions. Recently, several cities have enacted laws mandating owners of large buildings to publicly display an energy efficiency rating for their properties. While such transparency is necessary for market-driven energy reduction policies, the reliance on public-facing energy efficiency grades raises non-trivial questions about the robustness and reliability of methods used to measure and benchmark the energy performance of existing buildings. In this paper, we develop a building energy performance grading methodology using machine learning and city-specific energy use and building data. Leveraging the growing availability of data from city energy disclosure ordinances, we develop the GREEN grading system: a framework to facilitate more accurate, fair, and contextualized building energy benchmarks that account for variations in the expected and actual performance of individual buildings. When applied to approximately 7500 residential properties in New York City, our approach accounts for the differential impact of design, occupancy, use, and systems on energy performance, out-performing existing state-of-the-art methods. Our model and findings reinforce the need for more robust, localized approaches to building energy performance grading that can serve as the basis for data-driven urban energy efficiency and carbon reeduction policies. [ABSTRACT FROM AUTHOR]

Buildings and the mobility sectors are the two sectors that currently utilize large amount of fossil-based energy. The aim of the paper is to, critically analyse the integration of electric vehicles (EV) energy load with the building's energy load. The qualitative and quantitative methods are used to analyse the nearly/net zero energy buildings and the mobility plans of the Europe along with the challenges of the plans. It is proposed to either include or exclude the EV load within the building's energy load and follow the emissions calculation path, rather than energy calculation path for buildings to identify the benefits. Two real case studies in a central European climate are used to analysis the energy performance of the building with and without EV load integration and the emissions produced due to their interaction. It is shown that by replacing fossil-fuel cars with EVs within the building boundary, overall emissions can be reduced by 11–35% depending on the case study. However, the energy demand increased by 27–95% when the EV load was added with the building load. Hence, the goal to reach the nearly/net zero energy building target becomes more challenging. Therefore, the emission path can present the benefits of EV and building load integration. [ABSTRACT FROM AUTHOR]

This paper presents basic principles of built-environment physics' modelling, and it reviews common computational tools and capabilities in a scope of practical design approaches for retrofitting purposes. Well-established simulation models and methods, with applications found mainly in the international scientific literature, are described by means of strengths and weaknesses as regards related tools' availability, easiness to use, and reliability towards the determination of the optimal blends of retrofit measures for building energy upgrading and Urban Heat Island (UHI) mitigation. The various characteristics of computational approaches are listed and collated by means of comparison among the principal modelling methods as well as among the respective computational tools that may be used for simulation and decision-making purposes. Insights of coupling between building energy and urban microclimate models are also presented. The main goal was to provide a comprehensive overview of available simulation methods that can be used at the early design stages for planning retrofitting strategies and guiding engineers and technical professionals through the simulation tools' options oriented to the considered case study. [ABSTRACT FROM AUTHOR]

As building systems account for almost half of the total energy consumed by the building sector to provide space heating, cooling, and ventilation, efficiently designing these systems can be the key to energy conservation in buildings. Dual VAV systems with an effective control strategy can substantially reduce the energy consumption in buildings, providing a significant scope of further research on this system configuration. This paper proposes to utilize the warm air duct of the dual VAV system as a dedicated outdoor air (DOA) unit when no heating is required, which allows the cooling load to be effectively distributed between two ducts. A specific control sequence is proposed with different supply air temperature reset strategies to estimate the heating, cooling loads, and fan power energy consumption of the proposed system. A simple two-zone office building is taken as a preliminary case study to simulate the airflow rates and fan power of a single duct VAV and proposed dual VAV systems to illustrate the concept. Finally, a larger multi-zone office building is simulated to measure the annual heating, cooling loads, and fan power energy and compare the energy savings among the systems. The results show significant fan power reduction ranging from 1.7 to 9% and notable heating energy reduction up to 76.5% with a small amount of cooling load reduction varying from 0.76 to 2.56% depending on the different locations for the proposed dual VAV systems. Further energy savings from different supply air temperature reset strategies demonstrate the opportunity of employing them according to climates and case studies. The proposed dual VAV system proves to have the potential to be adapted in buildings for the purpose of sustainability and energy savings. [ABSTRACT FROM AUTHOR]

Despite the multiple advantages of prefabricated compared to conventional buildings, such as significant reductions in cost and time, improved quality and accuracy in manufacture, easy dismantling and reuse of components, reduction in environmental degradation, increase of productivity gains, etc., they still share a small part of the European building stock, mainly in the Mediterranean. This paper attempts to highlight the potential of prefabricated buildings to achieve advanced levels of performance, particularly as regards their thermal and energy behavior. More specifically, in this paper the energy needs of a single-family building constructed with prefabricated elements is analyzed, considering different climate contexts. The prefabricated elements comprising the building envelope were developed in order to address specific requirements with respect to their structural, hygrothermal, energy, fire, acoustical, and environmental performance, within the research project SUPRIM (sustainable preconstructed innovative module). The new multifunctional building element, also incorporating phase change materials for increased latent thermal heat storage, has been proven to be beneficial in all the examined climate zones. The results of the relevant studies will highlight the contribution of the new prefabricated element to the sustainability of the overall construction, as well as its advantages when compared with conventional constructions.

Residential buildings in the Kingdom of Saudi Arabia (KSA) contribute to nearly half of the overall electricity consumption in the building stock, highlighting their significant role in energy consumption. While an upgraded energy code has been established and enforced for new buildings, existing buildings continue to operate at the same level of energy consumption. Therefore, there is a need for further energy upgrades in existing buildings. This study evaluates the energy savings potential of various energy retrofitting measures for a case study in Jeddah, KSA. Data from previous studies and current practices were collected and analyzed. Different energy upgrade measures, such as windows replacement, wall insulation upgrade, roof insulation upgrade, and air conditioning unit replacement, were selected and evaluated using a digital simulation tool called Design-Builder. The simulation results were compared to understand the potential percentage of energy savings. The average annual energy consumption (AAEC) was used as the primary performance indicator to compare the energy savings among the scenarios. The results demonstrate significant reductions in energy consumption for the proposed scenarios. Furthermore, the study examined the significant impact of uncertainties, specifically, the infiltration rate and AC setback temperature, on AAEC. In conclusion, the proposed scenarios have the potential to achieve substantial energy savings, ranging from 25% to 66%, depending on the number of energy retrofitting interventions employed. The findings of this study can serve as a useful reference for similar energy retrofitting projects. [ABSTRACT FROM AUTHOR]

A building energy performance gap can be illustrated as the difference between the theoretical (methodologically defined) and the actual energy consumption. In EU countries, Energy Performance Certificates are issued when buildings are constructed, sold, or leased. This information is the first step in order to evaluate the energy performance of the building stock. In Serbia, when issuing an energy certificate, the adopted national methodology recognizes only energy consumption for heating. The main purpose of this paper is to evaluate the energy gap and estimate the relevance of an Energy Performance Certificate to meet the national energy efficiency or carbon target. An Energy Performance Certificate determines the theoretical residential and commercial building energy efficiency or its "design intent". This research stresses the necessity of measuring and achieving reductions in actual energy consumption through system regulation and consumers' self-awareness in buildings. The research compares the performance of the building stock (135) that is connected to the District Heating System (DHS), with its own integrated heat meter, to Individual Gas Boiler (IGB) systems (18), in the city of Novi Sad, Serbia, built after 2014. For the purpose of comparing energy consumption, 16 buildings were selected that are very similar in terms of design, operation, and location. The data used are derived from metered consumption data, official evidence of city service companies, and Energy Performance Certificates of the considered buildings. We have determined that IGB systems have a much wider specific annual performance gap (11.19–101 kWh/m2a) than the buildings in the DHS (3.16–18.58 kWh/m2a). [ABSTRACT FROM AUTHOR]

This paper describes the evolution of the thermal network and its applications for making simplified thermal models of buildings by means of thermal resistances (R) and capacitances (C). In the literature, there are several modelling schemes for buildings. Here, we investigate the advantages, disadvantages, and improvements of thermal networks. The thermal network method has been used in different studies for calculating indoor air temperature and heating load, estimating model parameters, and studying building interactions with heating and cooling systems. This review paper conducts an investigation into the application, system identification, and structure of thermal networks compared to other tools. Within the framework of the thermal network method, we conclude with some new proposals for research in this field to expand the idea of the thermal network to other engineering and energy management fields. [ABSTRACT FROM AUTHOR]

• Energy performance certificate (EPC) to c contribute in defining a energy poverty index. • Mapping building energy poverty risks to support policy actions for tackling energy poverty. • Merging GIS tool and EPC database to obtain city energy poverty maps at city (Bologna) level. Energy poverty is defined as the condition in which low-income people is no more able to face the costs of energy bills and consequently accept to live in cold and uncomfortable houses. In recent years the scientific literature about this specific issue has registered a significant growth, despite the problem is mainly approached from an econometric point of view to which instead medical, social and energy aspects have to be coupled. Recent EU policies like the Clean Energy Package and the Energy Building Performance Directive Recast III encourage to increase the efforts to tackle and eradicate the energy poverty. The paper approaches the problem focusing on one of its complementary causes: the building energy performance. The adopted methodology includes the calculation of the energy costs for each household, the definition of the energy poverty threshold, the calculation of the related building energy performance limit, otherwise leading to the energy poverty condition. These data, associated with the energy performance certificates, are used to create a GIS based mapping of the buildings potentially affected by energy poverty. Maps can be used to support decision making process in addressing appropriate strategies at urban level to tackle the energy poverty risk. The paper includes a case study in the city of Bologna where the proposed methodology is tested. [ABSTRACT FROM AUTHOR]

In the paper are presented the economic criteria on the basis of which the choice of selection of energetics modernization measures of existing buildings is made. The paper describes a synthesis of economic criteria from Romania and abroad on the basis of which the choice of technical solutions concerning the energetics modernization of existing buildings is made. Based on the article’s conclusions, one can make proposals aimed at improving the legislation presently in force in this field.