Search

Electrospun polymeric membranes are promising substrates for thin-film composite (TFC) membranes due to their unique interconnected pores and high porosity. However, it is still challenging to fabricate desirable electrospun substrates for organic solvent nanofiltration (OSN) owing to the relatively complex processing procedures and the organic operating environment. In this work, solvent-resistant electrospun polyimide (PI) nanofiber substrates were successfully fabricated through electrospinning followed by chemical cross-linking and heat-pressing. The cross-linking step improved the solvent tolerance of the membranes, while the heat-pressing step reduced the substrate pore size and surface roughness. However, it was found that heat-pressing at high temperatures (>140 °C) could degrade the cross-linking of PI, undermining their solvent-resistant property. A polyamide thin film layer was then synthesized on the solvent-resistant electrospun nanofibrous substrates via interfacial polymerization using reactant monomers m -phenylenediamine (MPD) and trimesoyl chloride (TMC). The TFC membranes exhibited excellent acetonitrile and acetone permeabilities of 31.28 ± 1.93 and 26.58 ± 1.13 L m−2 h−1 bar−1, respectively, with acid fuchsin (585 Da) and methyl orange (327 Da) rejections of 98.55 ± 1.24% and 92.42 ± 1.66%, respectively, in acetone. This study successfully demonstrated the potential use of electrospun PI nanofibers substrates for TFC membranes in OSN. [Display omitted] • Solvent resistant nanofibrous PI substrates were prepared by electrospinning followed by chemical cross-linking and heat-pressing. • Heat-pressing influenced the PI substrates' surface properties and solvent resistance, and the optimal point was 140 °C. • Polyamide thin film was synthesized on the PI substrates via interfacial polymerization for OSN application. • Acetone permeability was 26.58 L m−2 h−1 bar−1 with high rejection to acid fuchsin and methyl orange. [ABSTRACT FROM AUTHOR]

Conventional biomimetic membranes for desalination are mostly fabricated by incorporating water channels using self-assembled lipid or polymer vesicles as key platforms for protein or water channel reconstitution. Herein, we propose a thin film composite nanofiltration membrane via an unconventional liposomes-assisted fabrication without the incorporation of protein or water channels. The polyamide skin layer containing liposomes was thinner and filled with wrinkles and nanovoids. As a result, compared with the liposome-free control membrane, our optimized liposome-assisted membrane was able to achieve an increased water permeability from 11.17 to 18.21 LMH/bar, alongside an excellent MgCl 2 rejection of 95.87% and a monovalent/divalent (NaCl/MgCl 2) ion selectivity (α) of 18.2. Extensive membrane characterization showed that the liposome-assisted skin layer indeed exhibited a smaller thickness with an increased effective membrane area and a reduced surface hydrophobicity, which contribute towards a reduction in the hydrodynamic resistance of the polyamide layer. Furthermore, our approach of liposome-assisted thin film composite membrane is simpler and more scalable to fabricate without protein or water channels incorporation, rendering our design more attractive for future nanofiltration using vesicle-embedded biomimetic membranes. Image 1 • Lipid hollow vesicle was utilized to construct a thin film composite membrane. • The pathway of liposomes involved in the interfacial polymerization was confirmed via systematic characterization results. • Thinner polyamide with nanovoids and wrinkled structures was formed to facilitate water transportation. • The LE-TFC membrane exhibited better water permeability and higher divalent ion rejection. [ABSTRACT FROM AUTHOR]

Polyamide thin film membranes have shown outstanding performance in organic solvent nanofiltration (OSN). However, it is still challenging to produce polyamide hollow fibres for OSN, mainly due to limited solvent resistance of hollow fibre substrates and the difficulty to synthesize polyamide thin film on the surface of hollow fibre substrates. In this study, polyamide-based hollow fibre composite members for low pressure OSN were successfully developed. Solvent resistant polyimide hollow fibre substrates were first prepared through a non-solvent induced phase separation process, followed by chemical cross-linking with hexamethylene diamine. A polyamide thin film layer was then synthesized via interfacial polymerization, by circulating the reactant monomers including polyethyleneimine (PEI), piperazine (PIP) and trimesoyl chloride (TMC) through the hollow fibre lumen. The polyamide thin film with a thickness of ~60 nm was formed on the inner surface of the hollow fibre substrates. The membranes exhibited excellent nanofiltration (NF) performance under 2 bar operating pressure. The permeability of water, acetone and isopropanol was 6.8, 11.6 and 4.5 l m−2 h−1 bar−1, respectively. The membranes also achieved 99.9% and 91.8% rejection to rose bengal (1017 Da) and acid fuchsin (585 Da), respectively, in acetone. Furthermore, a 72-h filtration test was conducted and the membrane showed steady performance throughout the testing period. This study demonstrates the possibility of fabricating polyamide hollow fibre membranes for organic solvent nanofiltration at low pressure, which is desirable for practical applications. • Solvent resistant polyimide hollow fibre membranes were fabricated through chemical cross-linking. • Polyamide-based (PEI/PIP) layer was formed onto polyimide substrate to obtain a relatively loose selective layer. • Membranes achieved 11.6 and 4.5 l m−2 h−1 bar−1 permeability in acetone and isopropanol at 2 bar respectively. • Membranes maintained more than 90% rejection for acid fuchsin in 72-h filtration test, showing stable OSN performance. [ABSTRACT FROM AUTHOR]

In this study, we presented a novel nanofiltration membrane fabrication strategy through rapid co-deposition of a versatile platform – metal phenolic networks (MPNs) and piperazine (PIP) on a porous substrate followed by trimesoyl chloride (TMC) crosslinking. Inspired by the catechol chemistry, tannic acid (TA) was functionalized to tether PIP monomers, and participated in the co-deposition via coordination bonds with Fe3+ ions on a substrate to form Fe3+/TA-PIP complex. A series of analyses (SEM, XPS, FT-IR, water contact angle and zeta potential) confirmed the successful synthesis Fe3+/TA-PIP deposition and polyamide (PA) layer. The resultant membrane exhibited water permeability of 13.73 LMH/bar and 89.52 % for MgSO 4 rejection. The fabrication was further improved by embedding modified graphene oxide (GO) nanosheets into the Fe3+/TA-PIP complex. The optimized nanocomposite membrane achieved a water permeability at 21.66 LMH/bar, along with a well maintained MgSO 4 rejection at 91.25 % and NaCl/MgSO 4 selectivity (α) at 10.02 under 2 bar operation pressure. The rapid co-deposition mediated by nanomaterials incorporation provides an effective approach to design high performance thin film composite (TFC) membrane. Image 1 • A novel fabrication strategy was designed for nanofiltration membrane. • Metal phenolic networks were rapidly co-deposited with piperazine followed by interfacial polymerization. • Graphene oxide was incorporated into the deposited layer without additional fabrication step. • The optimized thin film composite membrane exhibited high separation performance. [ABSTRACT FROM AUTHOR]