Search

Quantum key distribution (QKD) is one quantum technology that can provide secure encryption keys for data transmission. The secret key rate (SKR) is a core performance indicator in QKD, which directly determines the transmission rate of enciphered data. Here, for the first time, we demonstrate a high-key-rate Gaussian-modulated continuous-variable QKD (CV-QKD) using telecom optical components. The framework of CV-QKD over these components is constructed. Specifically, the high-rate low-noise Gaussian modulation of coherent states is realized by a classical optical IQ modulator. High-baud low-intensity quantum signals are received by an integrated coherent receiver under the shot-noise limit. A series of digital signal processing algorithms are proposed to achieve accurate signal recovery and key distillation. The system can yield a high asymptotic SKR of 10.37 Mbps within 20 km standard telecom fiber, and the secure distance can exceed 100 km. This result confirms the feasibility of CV-QKD with state-of-the-art performance using telecom optical components. Besides, due to the ease of integrating these discrete components, it provides a high-performance and miniaturized QKD solution for the metropolitan quantum network. [ABSTRACT FROM AUTHOR]

There is no question about the value that digital signal processing brings to the area of biomedical research. DSP processors are used to sample and process the analog inputs that are received from a human organ. These inputs come from the organ itself. DSP processors, because of their multidimensional data processing nature, are the electrical components that take up the greatest space and use the most power. In this age of digital technology and electronic gizmos, portable biomedical devices represent an essential step forward in technological advancement. Electrocardiogram (ECG) units are among the most common types of biomedical equipment, and their functions are absolutely necessary to the process of saving human life. In the latter part of the 1990s, portable electrocardiogram (ECG) devices began to appear on the market, and research into their signal processing and electronics design capabilities continues today. System-on-chip (SoC) design refers to the process through which the separate computing components of a DSP unit are combined onto a single chip in order to achieve greater power and space efficiency. In the design of biomedical DSP devices, this body of research presents a number of different solutions for reducing power consumption and space requirements. Using serial or parallel data buses, which are often the region that consumes the most power, it is possible to send data between the system-on-chip (SoC) and other components. To cut down on the number of needless switching operations that take place during data transmission, a hybrid solution that makes use of the shift invert bus encoding scheme has been developed. Using a phase-encoded shift invert bus encoding approach, which embeds the two-bit indication lines into a single-bit encoded line, is one way to solve the issue of having two distinct indicator bits. This method reduces the problem. The PESHINV approach is compared to the SHINV method that already exists, and the comparison reveals that the suggested PESHINV method reduces the total power consumption of the encoding circuit by around 30 percent. The computing unit of the DSP processor is the target of further optimization efforts. Virtually, all signal processing methods need memory and multiplier circuits to function properly. [ABSTRACT FROM AUTHOR]

An autonomous surface vehicle known as a wave glider, instrumented with a low-power towed hydrophone array and embedded digital signal processor, is demonstrated as a viable low-noise system for the passive acoustic monitoring of marine mammals. Other key design elements include high spatial resolution beamforming on a 32-channel towed hydrophone array, deep array deployment depth, vertical motion isolation, and bandwidth-efficient real-time acoustic data transmission. Using at-sea data collected during a simultaneous deployment of three wave glider-based acoustic detection systems near Stellwagen Bank National Marine Sanctuary in September 2019, the capability of a low-frequency towed hydrophone array to spatially reject noise and to resolve baleen whale vocalizations from anthropogenic acoustic clutter is demonstrated. In particular, mean measured array gain of 15.3 dB at the aperture design frequency results in a post-beamformer signal-to-noise ratio that significantly exceeds that of a single hydrophone. Further, it is shown that with overlapping detections on multiple collaborating systems, precise localization of vocalizing individuals is achievable at long ranges. Last, model predictions showing a 4× detection range, or 16× area coverage, advantage of a 32-channel towed array over a single hydrophone against the North Atlantic right whale upcall are presented for the continental shelf environment south of Martha's Vineyard. [ABSTRACT FROM AUTHOR]

A novel technique for transmission of information through visible light communication (VLC) is developed in this study. A light-emitting diode is used as the light source at the transmitting side to send the encrypted information. At the receiving side, a light sensor, OPT-101, is used to receive the light signals that carry the encrypted information. The Arduino Due microcontroller board is used for digital signal processing at both the transmitting and receiving sides. Furthermore, to prevent the transmitted message from being intercepted, two chaotic systems, a master and a slave, with a synchronization controller are designed to obtain the transmitted audio signals. The design enables not only a VLC system with the light transmission path as a straight line (so that data cannot be stolen) but also the encryption of the audio signals with the chaotic system (Rössler system) to enhance data transmission security. The effectiveness of this system is then experimentally verified. [ABSTRACT FROM AUTHOR]

High-speed, low-power analog-to-digital converter (ADC) is a critical element for 5-GBd, 20-Gb/s digital signal processing (DSP)-based coherent optical communication receiver. To satisfy high data transmission rate requirement of optical receiver, a single-core and open-loop flash ADC with a new proposed multiplexer-based encoder is presented in this paper. Compared with conventional encoder topology, the new proposed topology achieves the fastest encoding speed and lowest power consumption. The optimized distortion is achieved by utilizing a leakage current compensation technique and a local negative feedback method in switched-buffer track-and-hold amplifier (THA). Strict synchronization is obtained for clock signals by careful designing of layout in tree-based clock networks. Furthermore, a master–slave comparator incorporated with a preamplifier reduces signal-dependent kickback noise as well as offset voltage. By using master–slave comparators and proposed encoders, the sampling rate is up to 21.12 GS/s. The 4-bit, 20-GS/s flash ADC is realized in 0.13- μ m SiGe BiCMOS technology and it only occupies 1.05 mm × 1.46 mm chip area. With a power consumption of 1.831 W from 4-V supply, the ADC achieves an effective number of bits (ENOB) of 2.5 at 15 GS/s. [ABSTRACT FROM AUTHOR]

Although HEVC, the emerging video coding standard, has doubled the coding performance of its predecessor H.264/AVC, its significantly increased computational complexity imposes great obstacles for HEVC encoders to be employed in real-time applications with embedded processors, such as digital signal processors (DSPs). In this paper, a TI Keystone multicore TMS320C6678 DSP-based highly paralleled low-cost fast HEVC encoding solution is well designed and implemented. First, the overall structure of HEVC encoder with CTU-level parallelism is re-designed to well support the encoding parallelism, with full consideration of the hardware characteristics. Second, a low-delay and low-memory multicore data transmission mechanism is proposed to reduce the latency of data access between internal L2 memory and external DDR3. Third, the encoding bottlenecks, i.e., the most time-consuming encoding modules, are identified and optimized for acceleration with TI powerful C6000 SIMD instructions. Experimental results show that our proposed HEVC encoder on TI TMS320C6678 DSPs can significantly improve the real-time capacity with tolerable performance loss, 0.93 dB performance loss under on average 465.50 times speedup as compared to CPU-based HM reference software, more specifically, which makes it desirable in power-constrained real-time video applications. [ABSTRACT FROM AUTHOR]

This paper proposes systematic code design methods for constructing efficient spectrum shaping codes with the maximum runlength limited constraint k, which are widely used in data storage systems for digital consumer electronics products. Through shaping the spectrum of the input user data sequence, the codes can effectively circumvent the interaction between the data signal and servo signal in high-density data storage systems. In particular, we first propose novel methods to design high-rate k constrained codes in the non-return-to-zero (NRZ) format, which can not only facilitate timing recovery of the storage system, but also avoid error propagation during decoding and reduce the system complexity. We further propose to combine the Guided Scrambling (GS) technique with the k constrained code design methods to construct highly efficient spectrum shaping k constrained codes. Simulation results demonstrate that the designed codes can achieve significant spectrum shaping effect with only around 1% code rate loss and reasonable computational complexity. [ABSTRACT FROM PUBLISHER]

This paper gives an information hiding method for H.264/AVC compressed video stream based on integer transform coefficient and virtual space encoding. In this method, the integer transform coefficients which are selected as carriers are divided into multiple groups. And it only needs to change at most the value of one of the coefficients in each group to embed $$\hbox {Log}_{2}(2N+1)$$ binary bits when each group contains $$N$$ coefficients. Moreover, the required change is simple, which can be achieved by adding 1 or $$-$$ 1 to the coefficient. Since only one coefficient's value is slightly changed for every $$\hbox {Log}_{2}(2N+1)$$ secret bits, this method does less harm to the original encoded video stream caused by the information embedding compared with that by current methods. Furthermore, this method only chooses the macroblock that has rich texture as the candidate carrier macroblock, and it employs the embedding position template to select the candidate $$4\times 4$$ coded blocks (I4-blocks) from the carrier macroblock for watermark bits embedding. In this way, the counteracting steganalysis performance is significantly improved. Experimental results on several test sequences demonstrate that the proposed approach can realize blind extraction and the performance is superior to that of the other current state-of-the-art information hiding methods also based on modulating integer transform coefficients. [ABSTRACT FROM AUTHOR]

In this communication, a new method is proposed to estimate the central direction-of-arrival (DOA) of multiple incoherently distributed noncircular sources from using the received data in two closely spaced uniform linear arrays. Both the received data vector and its conjugate are utilized to estimate the extended cross-correlation (CC) matrix. Singular value decomposition is then applied on the extended CC matrix to obtain the left and right singular vectors. Subsequently, the central DOA is estimated by using the left and right singular vectors associated with the largest singular values. The effectiveness and performance of the technique are accessed through numerical results. [ABSTRACT FROM AUTHOR]

In this paper, an interference channel with a cognitive relay (IFC-CR) is considered to achieve spectrum sharing between a licensed primary user and an unlicensed secondary user. The CR assists both users in relaying their messages to the respective receivers, under the constraint that the performance of the legacy primary user is not degraded. Without requiring any non-causal knowledge, the CR uses a successive interference cancellation to first decode the primary and secondary messages after a transmission phase. A power allocation is then performed to forward a linear weighted combination of the processed signals in the relaying phase. Closed-form expressions of the end-to-end outage probability are derived for both primary and secondary users under the proposed approach. Furthermore, by exploiting the decoded primary and secondary messages in the first phase, we propose the use of dirty paper coding (DPC) at CR to pre-cancel the interference seen at the secondary (or primary) receiver in the second phase, which results in a performance upper bound for the secondary (or primary) user without affecting the other user. Simulation results demonstrate that with a joint consideration of the power control at the secondary transmitter and the power allocation at CR, performance gains can be achieved for both primary and secondary users. [ABSTRACT FROM AUTHOR]

The article discusses the 100-Gigabit per second packet transport system developed by Nippon Telegraph and Telephone Corporation Network Service Systems Laboratories for high network traffic loads. The company's 100G-PTS optical technology is said to deliver coherent capacity through Multi-Protocol Label Switch Transport Profile which permits optical and packet switching. Its digital signal processing system is noted to mitigate fiber noise and polarization mode dispersion issues.

The phenomena of alteration of a digital signal that interfere with optimal performance, are present regardless of the number of filters, or dynamic elements electronic devices of high quality and environmental isolates that are available. Because of this, it is essential to have a proper technical management in managing the changes that may occur to the original signal. To correct and align the tax rates on incoming teams high order multiplexing is the applicability of the principles of positive justification or insertion of bits or voids that regulate this speed read-write. On the other hand, data transmission, we have a phenomenon known as jitter or jitter, even causing a shift in the ideal position of the bit received with reference to their nominal flanks, which leads to an inaccuracy final signal from the original income. No digital system must be presumed as immune to these changes. [ABSTRACT FROM AUTHOR]

With advances in solid-state lighting, visible light communication (VLC) has emerged as a promising technology to enhance existing light-emitting diode (LED)-based lighting infrastructure by adding data communication capabilities to the illumination functionality. The last decade has witnessed the evolution of the VLC concept through global standardisation and product launches. Deploying VLC systems typically requires replacing existing light sources with new luminaires that are equipped with data communication functionality. To save the investment, it is clearly desirable to make the most of the existing illumination systems. This paper investigates the feasibility of adding data communication functionality to the existing lighting infrastructure. We do this by designing an experimental system in an indoor environment based on an off-the-shelf LED panel typically used in office environments, with the dimensions of 60 × 60 cm 2 . With minor modifications, the VLC function is implemented, and all of the modules of the LED panel are fully reused. A data rate of 40 Mb/s is supported at a distance of up to 2 m while using the multi-band carrierless amplitude and phase (CAP) modulation. Two main limiting factors for achieving higher data rates are observed. The first factor is the limited bandwidth of the LED string inside the panel. The second is the flicker due to the residual ripple of the bias current that is generated by the panel's driver. Flicker is introduced by the low-cost driver, which provides bias currents that fluctuate in the low frequency range (less than several kilohertz). This significantly reduces the transmitter's modulation depth. Concurrently, the driver can also introduce an effect that is similar to baseline wander at the receiver if the flicker is not completely filtered out. We also proposed a solution based on digital signal processing (DSP) to mitigate the flicker issue at the receiver side and its effectiveness has been confirmed. [ABSTRACT FROM AUTHOR]

The authors propose a transmitter digital filter for joint optimisation of signal pulse shaping and chromatic dispersion pre-compensation, providing a detailed analysis of the architecture complexity. Experimental transmission of 40 × 50G channels (28 Gbaud four-level pulse amplitude modulation) over up to 110 km uncompensated standard single mode fibre with low-bandwidth hardware is demonstrated. [ABSTRACT FROM AUTHOR]

This paper presents a new wearable e-textile based system, named SWEET Sock, for biomedical signals remote monitoring. The system includes a textile sensing sock, an electronic unit for data transmission, a custom-made Android application for real-time signal visualization, and a software desktop for advanced digital signal processing. The device allows the acquisition of angular velocities of the lower limbs and plantar pressure signals, which are postprocessed to have a complete and schematic overview of patient's clinical status, regarding gait and postural assessment. In this work, device performances are validated by evaluating the agreement between the prototype and an optoelectronic system for gait analysis on a set of free walk acquisitions. Results show good agreement between the systems in the assessment of gait cycle time and cadence, while the presence of systematic and proportional errors are pointed out for swing and stance time parameters. Worse results were obtained in the comparison of spatial metrics. The "wearability" of the system and its comfortable use make it suitable to be used in domestic environment for the continuous remote health monitoring of de-hospitalized patients but also in the ergonomic assessment of health workers, thanks to its low invasiveness. [ABSTRACT FROM AUTHOR]

At 2000 m depth in the oceans, one can hear biological, seismological, meteorological, and anthropogenic activity. Acoustic monitoring of the oceans at a global scale and over long periods of time could bring important information for various sciences. The Argo project monitors the physical properties of the oceans with autonomous floats, some of which are also equipped with a hydrophone. These have a limited transmission bandwidth requiring acoustic data to be processed on board. However, developing signal processing algorithms for these instruments requires one to be an expert in embedded software. To reduce the need of such expertise, we have developed a programming language, called MeLa. The language hides several aspects of embedded software with specialized programming concepts. It uses models to compute energy consumption, processor usage, and data transmission costs early during the development of applications; this helps to choose a strategy of data processing that has a minimum impact on performances. Simulations on a computer allow for verifying the performance of the algorithms before their deployment on the instrument. We have implemented a seismic P wave detection and a blue whales D call detection algorithm with the MeLa language to show its capabilities. These are the first efforts toward multidisciplinary monitoring of the oceans, which can extend beyond acoustic applications. [ABSTRACT FROM AUTHOR]

Alternative wireless data communication systems are a necessity in industries that operate in harsh environments such as the oil and gas industry. Ultrasonic guided wave propagation through solid metallic structures, such as metal barriers, rods, and multiwire cables, have been proposed for data transmission purposes. In this context, multiwire cables have been explored as a communication media for the transmission of encoded ultrasonic guided waves. This work presents the proprietary hardware design and implementation of an automatic data transmission system based on the propagation of ultrasonic guided waves using as communication channels a high-temperature and corrosion-resistant oil industry multiwire cable. A dedicated communication protocol has been implemented at physical and data link layers, which involved pulse position modulation (PPM), digital signal processing (DSP), and an integrity validation byte. The data transmission system was composed of an ultrasonic guided waves PPM encoded data transmitter, a 1K22 MP-35N multiwire cable, a hardware preamplifier, a data acquisition module, a real-time (RT) DSP LabVIEW (National Instruments, Austin, TX) based demodulator, and a human-machine interface (HMI) running on a personal computer. To evaluate the communication system, the transmitter generated 60 kHz PPM energy packets containing three different bytes and their corresponding integrity validation bytes. Experimental tests were conducted in the laboratory using 1 and 10 m length cables. Although a dispersive solid elastic media was used as a communication channel, results showed that digital data transmission rates, up to 470 bps, were effectively validated. [ABSTRACT FROM AUTHOR]