Search

Poly(lactide)/halloysite nanotubes (PLA/HNT) nanocomposites with crystalline matrix were obtained by cold crystallization and examined. Neat HNT and HNT treated with N,N′- ethylenebis(stearamide) (EBS) were used as nanofillers. Reference materials, PLA and PLA/EBS blend, prepared in the same way, were also considered. The influence of HNT and/or EBS content on the crystallinity and morphology of PLA matrix, as well as on the dynamic mechanical and optical properties of the materials, was determined. The nanocomposites contained well-distributed HNT, with only occasional agglomerates. HNT, EBS-treated HNT and EBS influenced the morphology of the crystalline PLA matrix and the amounts of the disorder α’ (termed also δ) and order α crystallographic forms of PLA. Crystallinity increased stiffness of the materials compared to their counterparts with the amorphous matrix. Owing to the crystallinity and the presence of the nanofillers, the storage modulus at 20 °C and 60 °C increased by up to 30 and 60%, respectively, compared to neat amorphous PLA. Interestingly, at lower nanofiller content the crystalline nanocomposites with EBS were more transparent than neat crystalline PLA. [ABSTRACT FROM AUTHOR]

Amorphous polylactide/halloysite nanotube (PLA/HNT) nanocomposites were prepared and examined. Neat HNT and HNT treated with N,N' - ethylenebis(stearamide) (EBS) were used as nanofillers. The role of HNT and/or EBS content on the cold crystallization of amorphous PLA matrix, HNT dispersion, as well as on the dynamic mechanical and optical properties of the materials was determined. The PLA/HNT-based nanocomposites contained well-distributed nanotubes and occasionally micron-sized aggregates, especially at high loading. HNT, EBS treated HNT and EBS influenced the cold crystallization of PLA, therefore the formation of the disorder α′ and the order α crystallographic forms of PLA. The nanocomposites exhibited increased stiffness and decreased transparency compared to the neat PLA. Due to the reinforcing effect and additional specific features of HNT, the addition of the nanofiller allows tuning of the properties of the nanocomposites with amorphous PLA matrix. [ABSTRACT FROM AUTHOR]

Among currently available bio-based polymers, polylactide (PLA) and its (nano)composites have interesting physical and mechanical properties (high tensile strength and stiffness, good processability, biodegradability...). However, they have relatively low thermal stability at high temperature, low toughness and are extremely brittle, all of these drawbacks being obstacles to their utilization in many engineering applications. In this study, PLA-halloysite nanotubes (HNT) nanocomposites are modified by co-addition of a plasticizer (tributyl citrate (TBC)), aiming at reaching mechanical properties suitable for automotive applications. Properties of nanocomposites at different plasticizer contents are characterized with the aim to reach the best compromise between high tensile and flexural strengths and rigidities (ascribed to the matrix and HNT) and impact resistance, ductility, crystallization rat,e and degree of crystallinity, in particular. Results show that plasticized PLA-HNT nanocomposites are very interesting bio-based alternatives for automotive applications, when the plasticizer content is carefully chosen. [ABSTRACT FROM AUTHOR]

In the category of biopolymers, polylactide or polylactic acid (PLA) is one of the most promising candidates considered for future developments, as it is not only biodegradable under industrial composting conditions, but it is produced from renewable natural resources. The modification of PLA through the addition of nanofillers is considered as a modern approach to improve its main characteristic features (mechanical, thermal, barrier, etc.) and to obtain specific end-use properties. Iron oxide nanoparticles (NPs) of low dimension (10–20 nm) such as magnetite (Fe3O4), exhibit strong magnetization in magnetic field, are biocompatible and show low toxicity, and can be considered in the production of polymer nanocomposites requiring superparamagnetic properties. Accordingly, PLA was mixed by melt-compounding with 4–16 wt.% magnetite NPs. Surface treatment of NPs with a reactive polymethylhydrogensiloxane (MHX) was investigated to render the nanofiller water repellent, less sensitive to moisture and to reduce the catalytic effects at high temperature of iron (from magnetite) on PLA macromolecular chains. The characterization of nanocomposites was focused on the differences of the rheology and morphology, modification, and improvements in the thermal properties using surface treated NPs, while the superparamagnetic behavior was confirmed by VSM (vibrating sample magnetometer) measurements. The PLA−magnetite nanocomposites had strong magnetization properties at low magnetic field (values close to 70% of Mmax at H = 0.2 T), while the maximum magnetic signal (Mmax) was mainly determined by the loading of the nanofiller, without any significant differences linked to the surface treatment of MNPs. These bionanocomposites showing superparamagnetic properties, close to zero magnetic remanence, and coercivity, can be further produced at a larger scale by melt-compounding and can be designed for special end-use applications, going from biomedical to technical areas. [ABSTRACT FROM AUTHOR]

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites. [ABSTRACT FROM AUTHOR]