Search

This paper reviews the process of adapting the Carbon Literacy for Museums Toolkit to develop a course specifically for the archive sector, Carbon Literacy for Archives, Records and Special Collections. This toolkit was launched to the sector in spring 2024. It discusses why carbon literacy (CL) is important, covering the benefits, co-benefits and what CL is. It examines the impact of carbon literacy training (CLT) on greenhouse gas emission and energy use reduction, and why CLT is so effective in generating the transformational behavioural change that is needed to create a sustainable future. [ABSTRACT FROM AUTHOR]

The increasing demand for food, the lack of natural resources and arable land, and the recent restrictions on energy consumption require an immediate solution in terms of agricultural activities. This paper's objective was to review hydroponics (a new soilless cultivation technology) and compare it with conventional agriculture (soil cultivation) regarding its environmental impact and water and energy consumption. The soil loss, the crop/soil contamination, and the greenhouse gas emissions were the criteria for the environmental comparison of conventional agriculture and hydroponics. As for resource consumption, the water consumption rates (L/kg), energy consumption rates (kWh), and energy required (kW) were the criteria for comparing conventional agriculture with hydroponics. Tomato and cannabis cultivation were used as case studies in this review. The review results showed that the advantages of hydroponics over conventional cultivation include zero-soil cultivation, land-use efficiency, planting environment cleanliness, fertilizer and resource saving, water consumption reduction, and conservation. The disadvantages of hydroponics versus conventional cultivation were found to include the high investment costs, technical know-how requirements, and higher amount of demanded energy. [ABSTRACT FROM AUTHOR]

This paper studies the influence of temperature and of rainfall intensity and the effect of such variations on the treatment efficiencies and on the electrical consumptions in seven medium-large size Wastewater Treatment Plants (WWTPs) in Apulia in South Italy (Bari, Barletta, Brindisi, Lecce, Foggia, Andria and Taranto). It has been observed, in the considered WWTPs, a slight but clear increase of the incoming flow due to the increase in rainfall intensity, which results to an increase of the energy consumption per incoming volume. The impact of the climate change to the incoming flow, during the last five years (2016–2020), has been assessed indicating that an increase in rainfall intensity results to an increase of the WWTPs energy consumptions per wastewater treated volume. More specifically, for a specific WWTP (Lecce) it was found that the electrical consumption increases from 0.36 kw/m3 to 0.51 kw/m3 when the rainfall intensity was increased from 0.8 mm/min to 2.9 mm/min. Some adaption measures have been considered to upgrade the existing WWTP so to mitigate the energy increase and to limit the global effects of climate change. [Display omitted] • As Rain intensity rises, wastewater influx into WWTPs increases. • Rainfall intensity influences negatively electrical consumptions. • BOD removal is lower with increasing annual precipitations. • Temperature influences BOD, COD and SST removal efficiency. [ABSTRACT FROM AUTHOR]

Climate change is expected to significantly affect countries in Southern Europe and the Mediterranean Basin, causing higher-than-average temperature increases, considerable reductions in rainfall and water runoff, and extreme events such as heatwaves. These pose severe threats to local energy systems, requiring a reliable and quantitative risk analysis. A methodological approach is thus proposed which covers both energy supply and demand, utilizing the latest climate projections under different greenhouse gas emissions scenarios and an appropriate scale for each energy form. For energy supply technologies, risks are assessed through statistical regression models and/or mathematical equations correlating climatic parameters with energy productivity. To analyze climate risks for energy demand, bottom–up models were developed, integrating both behavioral and policy aspects which are often considered in a very limited way. The results show that climate change will mainly affect electricity generation from hydroelectric and thermal power plants, with variations depending on the plants' locations and uncertainties associated with precipitation and runoff changes. The climate risks for solar and wind energy were found to be low. Energy consumption will also be affected, but the range of risks depends on the ambition and the effectiveness of measures for upgrading the thermal performance of buildings and the intensity of climate change. [ABSTRACT FROM AUTHOR]

Global warming, climate change, and resource depletion have forced us to reconsider energy usage and efficiencies over the last few decades. Residential and commercial buildings are both large energy consumers, so improving energy and material usage efficiency in this sector is a common research topic. According to a recent study, the Building Sector (BS) accounts for 40% of greenhouse gas emissions. The primary objective of this paper is to examine and assess the potential of Renewable Energy Systems (RES) and their combinations for enhancing energy efficiency in the BS. Specifically, the focus will be on converting low energy-efficient buildings into highly efficient ones. The potential of the RES and their combinations for the BS is evaluated based on payback durations, energy generation, and reduction of CO 2 emissions. The optimization flow charts for the RES, feasibility studies, commercialization road maps of energy storage systems and the necessity of control mechanisms for enhancing RES efficiency were discussed. Additionally, the technology drawbacks are discussed, along with various innovative techniques recommended to direct future study in this area. Finally, this article assists the audience clear idea in the selection of the right combination of potential RES based on different conditions to achieve deep decarbonization in BSs. • Buildings sector (BS) responsible for 40% of GHG emissions. • Study assesses potential of Renewable Energy System (RES) in BS. • RES evaluated on payback, energy generation, and CO 2 reduction. • Optimization, feasibility and commercialization studies were discussed. • Article recommends right RES combinations for deep decarbonization in BS. [ABSTRACT FROM AUTHOR]

Co‐firing residual lignocellulosic biomass with fossil fuels is often used to reduce greenhouse gas (GHG) emissions, especially in processes like cement production where fuel costs are critical and residual biomass can be obtained at a low cost. Since plants remove CO2 from the atmosphere, CO2 emissions from biomass combustion are often assumed to have zero global warming potential (GWPbCO2= 0) and do not contribute to climate forcing. However, diverting residual biomass to energy use has recently been shown to increase the atmospheric CO2 load when compared to business‐as‐usual (BAU) practices, resulting in GWPbCO2 values between 0 and 1. A detailed process model for a natural gas‐fired cement plant producing 4200 megagrams of clinker per day was used to calculate the material and energy flows, as well as the lifecycle emissions associated with cement production without and with diverted biomass (supplying 50% of precalciner energy demand) from forestry and landfill sources. Biomass co‐firing reduced natural gas demand in the precalciner of the cement plant by 39% relative to the reference scenario (100% natural gas), but the total demands for thermal, electrical, and diesel (transportation) energy increased by at least 14%. Assuming GWPbCO2 values of zero for biomass combustion, cement's lifecycle GHG intensity changed from the reference (natural gas only) plant by −40, −23, and − 89 kg CO2/Mg clinker for diverted biomass from slash burning, forest floor and landfill biomass, respectively. However, using the calculated GWPbCO2 values for diverted biomass from these same fuel sources, the lifecycle GHG intensities changes were −37, +20 and +28 kg CO2/Mg clinker, respectively. The switch from decreasing to increasing cement plant GHG emissions (i.e., forest floor or landfill feedstocks scenarios) highlights the importance of calculating and using the GWPbCO2 factor when quantifying lifecycle GHG impacts associated with diverting residual biomass to bioenergy use. [ABSTRACT FROM AUTHOR]

Climate change and global warming as the main human societies’ threats are fundamentally associated with energy consumption and GHG emissions. The residential sector, representing 27% and 17% of global energy consumption and CO 2 emissions, respectively, has a considerable role to mitigate global climate change. Ten countries, including China, the US, India, Russia, Japan, Germany, South Korea, Canada, Iran, and the UK, account for two-thirds of global CO 2 emissions. Thus, these countries’ residential energy consumption and GHG emissions have direct, significant effects on the world environment. The aim of this paper is to review the status and current trends of energy consumption, CO 2 emissions and energy policies in the residential sector, both globally and in those ten countries. It was found that global residential energy consumption grew by 14% from 2000 to 2011. Most of this increase has occurred in developing countries, where population, urbanization and economic growth have been the main driving factors. Among the ten studied countries, all of the developed ones have shown a promising trend of reduction in CO 2 emissions, apart from the US and Japan, which showed a 4% rise. Globally, the residential energy market is dominated by traditional biomass (40% of the total) followed by electricity (21%) and natural gas (20%), but the total proportion of fossil fuels has decreased over the past decade. Energy policy plays a significant role in controlling energy consumption. Different energy policies, such as building energy codes, incentives, energy labels have been employed by countries. Those policies can be successful if they are enhanced by making them mandatory, targeting net-zero energy building, and increasing public awareness about new technologies. However, developing countries, such as China, India and Iran, still encounter with considerable growth in GHG emissions and energy consumption, which are mostly related to the absence of strong, efficient policy. [ABSTRACT FROM AUTHOR]