Search

This study delves into the dynamic evolution of solids content in a pilot-scale through air drying tissue machine, aiming to enhance comprehension and refine optimization strategies for tissue manufacturing. It focuses on development of solids content throughout the process. Analyzing the interaction between process parameters and solids content provides deeper insights into water removal dynamics. The research employs solid contents monitoring techniques in pilot scale, offering a detailed view of solids content evolution from the wet web's inception to the final tissue product. It significantly highlights the impact of key parameters, particularly pulp refining, on solids content across all positions of the pilot machine. Additionally, the study emphasizes the influence of vacuum system configurations, identifying the relationship between energy expended in the vacuum system and evaporation energy. Furthermore, the results indicate that compression and air displacement dewatering in vacuum boxes are less speed-sensitive compared to heat-driven evaporation in the TAD- and Yankee cylinders. Solid contents at all positions in the tissue machine correlates between various dewatering elements. Optimizing site-specific dewatering and evaporation strategies can potentially save drying energy in the Yankee drying phase which hold promise for enhanced energy and resource utilization, aligning with demands for sustainable manufacturing practices. [ABSTRACT FROM AUTHOR]

It is well-known that energy consumption is increasing around the world on a daily basis. In the construction sector, a highly effective solution for reducing energy consumption involves exploring both modern and traditional buildings designed to adapt to climate changes. One promising approach is to use paper waste and bio-sourced materials as the basis for insulation. The purpose of this study was to improve the sustainability of buildings by using recycled waste materials that have a positive impact on the environment, people, and the economy. A novel insulating material composed of recycled paper waste and Ampelodesmos mauritanicus leaves and fibers was developed and used in non-load-bearing elements. The paper waste was transformed into pulp and mixed with the bio-sourced materials to create a composite material that exhibits excellent insulation properties. The resulting material is lightweight, durable, and cost-effective. Furthermore, different mechanical and thermal analyses were performed on specimens with varying dosage ratios. The results showed that the developed material has good thermal insulation, with a value of 0.027 W/m.K. [ABSTRACT FROM AUTHOR]

A novel approach for paper drying using airborne ultrasound technology is presented. A unique experimental setup is developed, and a systematic study is conducted using 23 factorial design of experiments and Analysis of Variance. Three controlling factors are considered in the experiments including the initial moisture content, basis weight and refining condition. The outcome of the experiments is compared to a previous work on direct-contact ultrasonic drying of paper. The results confirm that similar to direct-contact, for airborne ultrasonic drying, the basis weight/thickness of the sample is the most important factor in ultrasonic drying and it is followed by the effect of initial moisture content. Using linear regression model, a correlation for predicting the total time of ultrasonic drying is provided. Quality of the dried samples is evaluated, and the permeability measurements confirmed the effect of pore characteristics on ultrasonic drying. The analysis for energy consumption reveals that airborne ultrasonic drying is more efficient at higher moisture contents. [ABSTRACT FROM AUTHOR]

Overwintering insects are facing energetic challenges because of food shortage, low temperature, and desiccation stress. Paper wasps of the genus Polistes overwinter as mated adults (gynes) in hibernacula protecting them from predation, snow, and rain but barely from low environmental temperature. In different climates, they face differing overwintering temperature regimes, and therefore they may differ in their energy use. We investigated how much of energy resources built up until autumn is used during diapause dormancy in natural hibernacula by measuring lipid, glycogen, and free carbohydrate content in autumn and early spring in Polistes dominula from temperate European (Austrian) and warm Mediterranean (Italian) climate and Polistes gallicus from Mediterranean climate. Winter energy consumption amounted to ~ 339 and ~ 310 J per wasp in the Austrian and Italian Polistes dominula populations. The smaller Italian Polistes gallicus consumed ~ 247 J. This amounts to 2.62, 2.35, and 1.79 J per day. Of this, the energy demand was mainly fuelled by lipids (84%, 93%, and 90%, respectively), but glycogen stores contributed also considerably (16%, 6%, and 9%). Free carbohydrates decreased only by 0.7%, 1%, and 0.8%. While fat stores seem still sufficient in spring, the wasps depleted most of their carbohydrates. The energy reserves of 396, 400, and 147 J per wasp remaining in spring in the three populations seem sufficient to fuel rest or simple brood care activities for a whole summer but restrict foraging flights to a few hours (~ 3.5–6 h). Results suggest that energy supply might become challenging in expected future climate scenarios. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study's results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022. [ABSTRACT FROM AUTHOR]

State-of-the-art manufacturing of tissue paper by Through Air Drying provides excellent product performance, although at a high production cost and energy use. In this work, a laboratory scale vacuum suction box was used to mimic the initial dewatering and the Through Air Drying molding, together with a pilot-scale trial. The purpose was to investigate both how the laboratory scale corresponds to pilot scale testing and investigate how fabric design, basis weight, beating, and fibers affect dewatering and sheet caliper. This study reevaluates dewatering mechanisms during molding, challenging the previous hypothesis of pure air displacement dewatering. Results show a parallel mechanism of compression dewatering and air displacement. The influence of rush transfer is examined, impacting the sheets' visual appearance, thickness, and solids content. Correlations between molding box solids content and headbox freeness emphasize significance of fibers and beating levels. Pilot results confirm the link between former solids and molding box solids. Pilot trials validate the laboratory results, facilitating comprehensive simulation of full-scale manufacturing. This research reveals dewatering mechanisms, highlights operational parameters, and enables effective Through Air Drying process design and refinement. [ABSTRACT FROM AUTHOR]

The air-drying of resin impregnated paper sheets in industrial lines, formed by a serial array of furnaces, presents a high number of different controllable operational parameters whose adjustment, usually done by the maintenance staff, leads to non-efficient configurations. A model-based numerical tool, which predicts accurately in a few seconds the evolution of the paper temperature and paper grammage along the line for a given combination of the input operational parameters (direct design), was used coupled to an optimization tool to select appropriate operational parameters (inverse design) that ensure a drying process quality (i.e., fulfills an objective grammage profile) with a minimum of energy consumption. The numerical tool was capable of selecting suitable configurations with an energy reduction of up to 50% for several tested industrial cases, making the model an essential tool in the framework of the increasingly relevant role of digital twins in industry. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

Summary: In the pulp and paper industry, black liquor, which is a biomass resource, is burned to produce electricity. Black liquor is concentrated to 21 wt% water through an evaporator before being burned in a boiler. For the evaporator, a multiple‐effect evaporator (MEE) is mainly used, but it requires a large amount of energy and cost. Therefore, it is crucial to reduce energy and cost of evaporation process. Hence, this study suggested a novel process model that integrated mechanical vapor recompression (MVR) with MEE to increase the energy efficiency. The suggested MVR‐assisted evaporation process was composed of preheating and evaporation processes to effectively concentrate black liquor. In addition, it reduced the steam consumption of MEE by using MVR, which uses relatively inexpensive electric energy in the pre‐evaporation process. In the simulation results, the steam, electricity consumption, and the latent heat recovered from the secondary vapor of the suggested process were quantitatively analyzed to verify the energy efficiency. The results indicate that the proposed process increases substantial energy efficiency compared to the conventional process. Then, the appropriateness of the suggested process was evaluated by the techno‐economic analysis. The total annualized cost (TAC) is determined for both current and potential future economic benefits. TAC of the MVR‐assisted MEE configuration can be reduced by up to 77.54%. [ABSTRACT FROM AUTHOR]

Producing tissue paper is an energy-demanding process; a significant amount of energy is expended when removing water by vacuum, mechanical pressing, and thermal drying. Because the water is most energy-demanding to remove in drying, making the preceding step of vacuum dewatering more efficient would benefit the whole process. This article focuses on developing a laboratory-scale method for verifying the nature of diminishing returns of water removal and investigating efficiency strategies of the vacuum dewatering. The theoretical concept of successive vacuum suction boxes with progressing vacuum levels was tested at the laboratory scale in order to show quantifiable results of the previously solely theoretical concept. The results confirmed that vacuum dewatering can be improved by adding progressively higher vacuum levels and that such a practice can benefit both outgoing dryness levels and expended vacuum pump energy. To truly examine the power of progression of vacuum levels, rewetting can be included in the calculations, by using an approximate value collected from pilot or fullscale measurements. For any new fiber mix, pulp type, vacuum level setup, basis weight, etc. the vacuum levels, rewetting, and dwell times need to be tuned to that specific case. [ABSTRACT FROM AUTHOR]

Internet of Things (IoT) architectures generally focus on providing consistent performance and reliable communications. The convergence of IoT, edge, fog, and cloud aims to improve the quality of service of applications, which does not typically emphasize energy efficiency. Considering energy in IoT architectures would reduce the energy impact from billions of IoT devices. The research presented in this paper proposes an optimization framework that considers energy consumption of nodes when selecting a node for processing an IoT request in edge-fog-cloud layered architecture. The IoT use cases considered in this paper include smart grid, autonomous vehicles, and eHealth. The proposed framework is evaluated using CPLEX simulations. The results provide insights into mechanisms that can be used to select nodes energy-efficiently whilst meeting the application requirements and other network constraints in multi-layered IoT architectures. [ABSTRACT FROM AUTHOR]

Furthermore, very complicated multiphase and thermal processes are the corner stone in modern industry, high technology development, energy conversion and utilization, renewable and sustainable energy technologies, just to name a few here. Therefore, it is essential to develop new technology to improve energy utilization efficient, sustainable energy and low carbon/zero carbon technology to reduce carbon footprint. [Extracted from the article]

Recently, as the use of wearable devices and the demand for eco-friendly energy have increased, many studies have been conducted on triboelectric nanogenerators (TENGs), which can economically harvest energy. Paper is considered a promising substrate and frame material that can be used to manufacture self-powered TENGs, owing to its flexibility, low cost, and accessibility. Herein, we present a sandwich-structured foldable paper-based TENG (FP-TENG) that comprises flexible materials and uses paper as a substrate. The FP-TENG can generate up to 572 mW/m2 of power via contact–separation of the triboelectric electrified body at the top and bottom. With more folds of the FP-TENG, the triboelectric cross-sectional area increases, and, thus, the electrical output increases. In addition, the proposed TENG exhibits excellent durability without signal degradation under 5000 cycles of repeated pushing motions. To demonstrate its practicality, the FP-TENG was manufactured in the form of a wristwatch Velcro and connected to an electronic watch panel to supply power. Various deformations are possible with origami, and they can drive wristwatches through external forces. Therefore, the FP-TENG is expected to be utilized as a sustainable and promising eco-friendly energy source for small electronic devices. [ABSTRACT FROM AUTHOR]

The papers analyzed here were presented in the reposts of leading scientists in the processes and apparatuses of chemical technology and published in the Proceedings of the International Scientific and Technical Symposium "Improving the Energy and Recourse Efficiency and Environmental Safety of Processes and Apparatuses in the Chemical Industry and Allied Branches," which was dedicated to the 110th anniversary of A.N. Planovskii and held at Kosygin Russian State University. The scientific areas considered included the development of processes and apparatuses in chemical technology as a science and an educational discipline; the main trends in the theory of engineering of energy- and resource-efficient chemical engineering systems under the conditions of the digital economy; the possibilities of improving the efficiency of mass-transfer processes through the use of contemporary methods for the mathematical modeling and kinetic calculation of apparatuses, intensification, and energy and resource saving; the development of systems of computational fluid dynamics as applied to the spatial calculations of processes and apparatuses; innovative methods for the production of fibrous and nano materials; the fundamentals of methods for the intensification of basic processes in different industrial technologies; the scientific foundations for the creation of energy- and resource-efficient chemical engineering and other processes; considerations of environmental safety for technological processes and equipment; and efficient systems for the improvement of technospheric safety. [ABSTRACT FROM AUTHOR]

There is an urgent need for energy sources with lower environmental impacts to dispose of waste generated by human activities. In this context, a holistic analysis of energy use of waste from agricultural and forestry activities, animal excreta, urban solid waste and sewage, waste from the pulp and paper industry and charcoal in Brazil is presented. Based on a bibliographic review, the current Brazilian panorama is presented in figures giving, a vision of national potential for harnessing bioenergy from this theoretical and technical potential. The QGIS3.24.2 Tisler geoprocessing tool was used to generate potentiality maps from census data of microregions and municipalities available in the IBGE database (2022) and in the Geocentric Reference System for the Americas (SIRGAS 2000). The results of map analysis by micro‐regions of the primary energy from agricultural residues highlight sugar cane, corn and soybeans crops, followed by wastewater and animal excreta. They stood out amont the studied sources of biomass with technical potentials of 53.17, 15.23 and 6.81 GW, respectively. With these results, it is concluded that Brazil could enable around 75 GW installed power, reusing all biomass, potentially 12.5 PJ, without considering the 16 GW already installed from sugarcane and paper black liquor plants. [ABSTRACT FROM AUTHOR]

Research has revealed the existence of an energy-efficiency gap – the difference between optimal and actual energy end-use, suggesting that energy efficiency can be improved. Energy management (EnM) is a means for improving industrial energy efficiency. However, due to various barriers, the full potential of EnM is not realised. Several studies have addressed drivers and barriers to energy efficiency but few to EnM. This study aims to identify EnM practices, the most important perceived drivers and barriers for EnM, and relations among them in the energy-intensive Swedish pulp and paper industry (PPI), which has the longest experience internationally of practising EnM systems, and has worked according to the standards since 2004. Our results show that, altogether, the PPI works regularly and continuously with EnM, with a clear division of responsibilities. The highest maturity for EnM practices was for energy policy, followed by organization, investments, and performance measurement. The study also shows that communication between middle management and operations personnel has potential for improvement. The most important categories of drivers were economic, whereas for barriers they were organizational. Nevertheless, knowledge-related barriers and drivers were amongst the most important, suggesting that the absorptive capacity for energy issues could be improved. Image 1029 • Energy is managed continuously, with clear policies and responsibilities. • The main drivers are economical while main barriers are organizational. • Knowledge related barriers and drivers are amongst the next most important. • Employees' absorptive capacity for energy issues could be improved. • Link between energy policy and performance measurement could be improved. [ABSTRACT FROM AUTHOR]

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ultrafine marble dust waste particles were obtained using the top–down approach. • Waste and by-products had positive effect on dry grinding of stone wastes. • It is economically feasible, also environmentally friendly. • These obtained ultrafine particles can be used effectively mineral filler in many areas. Waste management in marble processing plants is a considerable problem in countries with developed stone industries and trade. Research on the utilization of stone waste in different fields is still continuing. However, there are few studies on using this stone waste from processing plants as mineral fillers. Moreover, no study in the literature has investigated the influence of grinding aids on stone properties. The current research is the first to compare of the efficiency of different grinding aids on the waste calcitic and dolomitic marble in the production of mineral fillers. The objective of this work is to research the impacts of waste and by-products on the dry grinding of stone wastes as grinding aids in a vertical stirred media mill. The results were assessed in terms of various parameters: product particle size, powder flowability, material coating on the grinding media, and energy consumption. Remarkably, the study showed that the use of any of the grinding aids tested enhanced the grinding process in comparison with the no-aid condition. The best product fineness value was achieved with pomace oil followed by the by-product glycerin, among the grinding aids tested in both samples. Moreover, a higher media coating reduction and the highest energy saving were achieved with pomace oil. The most significant and lowest increase in the fluidity index was achieved with pomace oil and paper wastewater, respectively. Additionally, the Fourier transform infrared spectroscopy (FTIR) performed to reveal the interaction between particle surfaces and grinding aids demonstrated the activity of pomace oil and glycerin polar functional groups on particle surfaces. The analysis of the agglomeration phenomenon with SEM (scanning electron microscopy) micrographs showed that particle agglomeration could be eliminated with the pomace oil. Thermogravimetric analysis (TGA) was used to investigate changes in the mass of the samples' due to temperature changes. With this study, a significant contribution will be made to the ecosystem using waste marble powder whose storage problematic. [ABSTRACT FROM AUTHOR]

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP. [ABSTRACT FROM AUTHOR]

Hydrothermal liquefaction was applied to treat paper‐plastic‐aluminum (Al‐PE‐Pa) complex packaging waste for bio‐oil production. The interactive effects between the main components of paper fiber, low‐density polyethylene (LDPE), and aluminum foil in such complex material were studied. The co‐liquefaction of paper fiber and LDPE had a significant synergistic effect. The addition of hydrogen‐rich LDPE effectively promoted the removal of oxygen‐containing groups. Aluminum foil had only a slight impact on the liquefaction of paper fiber, but it can significantly decrease the oxygen content of the bio‐oil, increase the high heating value of the bio‐oil, and significantly reduce the ester and phenol contents in the bio‐oil. The co‐liquefaction of paper fiber/LPDE/aluminum foil exhibited superimposed effects of paper‐plastic synergy and in‐situ hydrogenation of Al‐H2O reaction. A new pathway for the energy utilization of Al‐PE‐Pa complex packaging waste is provided. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Arid areas account for more than 20% of Earth's surface. Many of these arid areas suffer from harsh climates where energy consumption is high and production coexists with high hydrological stresses. In such areas, the production of water is directly linked to the production of electricity, bringing the Energy–Water nexus to a higher level [Heggy et al., Sustainable Energy-Water-Environment Nexus in Deserts (Springer, 2022)]. Under the current energy transition from a fossil-based economy to a renewable energy-based system, arid areas are seen as potential reservoirs for electricity production due to their high solar potential, thereby helping to achieve global decarbonation targets. This energy production transition will strongly affect the Energy–Water nexus as it will contribute to the decoupling of electricity from water production. The International Conference on Sustainable Energy–Water–Environment Nexus 2019 (ICSEWEN19) conference was the first to address the Sustainable Energy–Water Nexus in Deserts, bridging the gap between research and industry and highlighting the research capabilities relevant to Qatar, the region, and internationally. The Invited Papers from the International Conference on Sustainability, Energy, Water, and Environment Nexus in Desert Climates Special Collection in Journal of Renewable and Sustainable Energy presents articles covering the main elements of the conference with respect to solar photovoltaic implementation in desert environments as a key element to succeed in this global energy transition. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine the effect of electrical conductivity, pH and temperature which were kept constant during treatment via an advanced control strategy on chemical oxygen demand, color, turbidity and total suspended solids removal and energy consumption. Central Composite Design matrices were formed for aluminum and iron electrode systems separately with different combinations of 5 independent variables (electrical conductivity, pH, temperature, current intensity and electrolysis time). Obtained results revealed that aluminum electrode system was found to be more effective than iron electrode system under controlled conditions. Comparison of uncontrolled and controlled studies at optimum values of aluminum electrode system showed an increase by 31.67% in chemical oxygen demand removal and a decrease by 48.30% in energy consumption under controlled case. Results indicated that constant electrical conductivity, pH and temperature during electrocoagulation process of pulp and paper mill wastewater by means of a controller enhanced treatment efficiency. [ABSTRACT FROM AUTHOR]

With growing demand of paper products, the electric consumption in pulp and paper industry is increasing globally where a share of 30 % is attributed to the pulp pumping system. The efficient designing and running of pumping system are critical for energy efficiency. The incomplete information on pulp flows and the oversized designs are the major causes of low efficiency. In the first part of this research, the fiber level models and rheological properties covering a series of unit applications are examined. A loss model of pulp pump is set up by considering different factors influencing pumping performance. The efficiency improvement opportunities in pulp pumping are systematically investigated. The drag-reducing feature at low consistency pulp pumping is highlighted which will be further applied in energy optimized sizing and dimensioning of a pulp pump in the second part of this research. [ABSTRACT FROM AUTHOR]

Electrophoretic display (EPD) has been a prevailing paper-like display technology for years, owing to its advantages of flexibility, low-power consumption, and good sunlight readability. However, it is regrettable that the black/white EPD still dominates the majority of the market while a commercially sold full-color EPD is still unavailable. In this paper, we proposed a facile yet feasible method to fabricate a color EPD by a tape-assisted transfer method, which is the first demonstration using transfer method to achieve color micro-encapsulated EPD. [ABSTRACT FROM AUTHOR]

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

In this paper, a wideband metasurface-loaded (MTS-L) rectenna system is proposed to capture electromagnetic (EM) energy at arbitrary azimuth angles. The radiation patterns of different modes in the original MTS configuration are analyzed using the characteristic mode theory, and potential modes with omnidirectional radiation are screened out. By the arrangement of patches, the roundness performance of the radiation pattern can be ameliorated, and the omnidirectional characteristic is obtained over a wide frequency band. Subsequently, the surface current density of the selected mode is carefully and artificially designed to facilitate probe excitation as well as refrain from introducing complex power-combining networks. A wideband rectifier circuit is designed as the load of the proposed antenna. Eventually, measured results show that it operates from 4.6 to 9.6 GHz with a fractional bandwidth of 70.4%, and the peak system efficiency is 52.2%. The proposed system demonstrates excellent potential for wireless power transmission and EM energy harvesting in indoor environments. [ABSTRACT FROM AUTHOR]

The Swedish pulp and paper industry (PPI) must increase energy efficiency to remain competitive on the global market, which has experienced entries from countries with cheaper energy and raw material supplies. Interactions among variables for energy use, production, energy management, electricity price and firm characteristics (FC), in different types of mills, i.e., pulp, paper and integrated mills, in Sweden from 2006 to 2015 indicate that correlations among the studied variables were different in different types of mills. This difference between types of mills seemed to originate partly from varying accessibility to production residue that could be used for energy. For all types of mills, variation of electricity prices did not correlate significantly with energy efficiency during the study period. The studied FC were firm's age, number of employees, number of companies in company group, net sales and profit for the year. Energy efficiency was more affected by the variables characterizing energy and production compared to the variables representing FC. This study also suggested presence of possible discrepancies between FC that were perceived as barriers to energy management towards energy efficiency, according to previous studies, and what was shown by the data combining variables representing energy use, production and FC. [ABSTRACT FROM AUTHOR]

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg−1) and CO emissions (22.89 ± 2.40 g kg−1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg−1 and 48.10 ± 12.50 gCO kg−1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials. • Analysis of waste-based briquettes use in Andean areas were conducted. • Laboratory analysis, social surveys, and on field evaluations are the methods. • Briquettes can be employed for reducing about 30% of the conventional fuels. • The research encourages the employment of waste-based briquettes in the Andes. • Incentives to briquettes production and consumption should be introduced. [ABSTRACT FROM AUTHOR]

Paper drying is a highly energy-intensive and complicated multivariate process. The dryer section plays an important role in the energy consumption of a paper machine, especially of thermal energy. A comprehensive method for assessing the energy performance of the dryer section was investigated in this study to improve energy efficiency. This method was divided into three component processes: energy and evaporation load audit, field test and observation, and energy flow analysis and energy efficiency estimation. In a case study, we found that the method could, in addition to analyzing the key factors that restrict drying efficiency, also depict the details of energy consumption clearly. At the same time, several significant energy-saving measures were suggested to improve the energy efficiency of the paper-drying process. [ABSTRACT FROM PUBLISHER]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

The pulp and paper industry accounts for approximately 5% of total industrial energy consumption and contributes 2% of direct carbon dioxide (CO 2 ) emissions from industries. World paper and paperboard demand and production are increasing significantly, leading to an increase in this sector's energy use and CO 2 emissions. Although current studies identify a wide range of energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is limited or scattered regarding new energy-efficiency technologies that are not yet fully commercialized. Development of emerging or advanced energy-efficiency technologies and their deployment in the market will be crucial for this industry's mid- and long-term energy saving and climate change mitigation strategies. This paper compiles available information on energy savings, environmental and other benefits, costs, and commercialization status for 25 emerging technologies to reduce the energy use and CO 2 emissions. The purpose is to provide a well-structured comprehensive review on these emerging energy-efficiency technologies for engineers, researchers, investors, policy makers, pulp and/or paper companies, and other interested parties. [ABSTRACT FROM AUTHOR]

Pulp and paper mill effluent (PPME), a rich cellulosic material, was found to have great potential for biohydrogen production through a photofermentation process. However, pretreatments were needed for degrading the complex structure of PPME before biohydrogen production. The aim of this study was to gain further insight into the effect of an ultrasonication process on PPME as a pretreatment method and on photofermentative biohydrogen production using Rhodobacter sphaeroides NCIMB. The ultrasonication amplitudes and times were varied between 30–90% and 15–60 min, respectively, and no dilution or nutrient supplementation was introduced during the biohydrogen production process. A higher biohydrogen yield, rate, light efficiency and COD removal efficiency were attained in conditions using ultrasonicated PPME. Among these different pretreatment conditions, PPME with ultrasonication pretreatment employing an amplitude of 60% and time of 45 min (A60:T45) gave the highest yield and rate of 5.77 mL H 2 /mL medium and 0.077 mL H 2 /mL h, respectively, while the raw PPME without ultrasonication showed a significantly lower yield and rate of 1.10 mL H 2 /mL medium and 0.015 mL H 2 /mL h, respectively. The results of this study demonstrated the potential of using ultrasonication as a pretreatment for PPME because the yield and rate of biohydrogen production were highly enhanced compared to the raw PPME. Economic analysis was also performed in this study, and in comparison with raw PPME, the highest net saving was $0.2132 for A60:T45. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Municipal solid waste paper was used as raw material for cellulose nanofibres (CNFs). • Pulping, washing and flotation were used as pre-treatments before nanofibrillation. • Despite different amounts of impurities in waste fibres, CNFs were obtained. • Properties of waste CNFs were affected by the used pre-treatment. Abstract When aiming for higher resource efficiency, greater utilization of waste streams is needed. In this work, waste paper separated from mixed municipal solid waste (MSW) was studied as a potential starting material for the production of cellulose nanofibres (CNFs). The waste paper was treated using three different techniques, namely pulping, flotation and washing, after which it was subjected to an ultrafine grinding process to produce CNFs. The energy consumption of the nanofibrillation and nanofibre morphology, as well as properties of the prepared nanofibers, were analysed. Despite the varying amounts of impurities in the waste fibres, all samples could be fibrillated into nanoscale fibres. The tensile strengths of the CNF networks ranged from 70 to 100 MPa, while the stiffness was ∼7 GPa; thus, their mechanical strength can be adequate for applications in which high purity is not required. The contact angles of the CNF networks varied depending on the used treatment method: the flotation-treated networks were more hydrophilic (contact angle 52.5°) and the washed networks were more hydrophobic (contact angle 72.6°). [ABSTRACT FROM AUTHOR]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

This paper aims to empirically examine the relations between energy consumption, R&D costs and capital expenditures on the profitability of manufacturing companies in the paper and allied industry. The main focus in this article is on the companies, which are operating in the manufacture of pulp from wood and the paper production industry. Multiple regression analysis was used to test if the energy consumption, R&D costs and capital expenditures significantly predict EBITDA profitability. The results of the regression analysis indicated that all used predictors explained (R2) 35.7% of the company profitability variance (R2 = 0.357, F (3; 80) = 14.82, p-value < 0.01). The performed regression analysis also shows that energy consumption has a significant contribution to the profitability of the company. The results also indicate that only energy consumption explains 12.1% of the profitability variance (R2 = 0.121, F (1; 101) = 13.86, p-value = 0.01). The results of the regression analysis show that EBITDA profitability will increase by about 3.7 · 10-7% for each 1 000 GJ energy consumed. [ABSTRACT FROM AUTHOR]

Abstract The paper drying process has the highest level of energy consumption in the pulp and paper production process. Analysis and optimization of the energy system during the paper drying process is critical for improving the energy efficiency of the entire paper mill. In the existing model for the paper drying process, the solution requires accurate boundary conditions such as the air temperature and humidity of the pocket area and the cylinder surface temperature, which are very difficult to obtain in the papermaking process. This can result in significant deviations between the model solution and the actual production process. This paper focuses on the single-tier dryer cylinder-based paper drying process that has been widely used with high-speed papermaking machines in recent years. A mathematical model is proposed based on real-time data. The verification via industrial production demonstrates that the proposed model is reliable for the paper drying process. Based on the simulation results, two optimization operations have been proposed. The energy consumption decreases from 1.51 t steam/t paper to 1.44 t steam/t paper, 4.6% of the steam and 1.26 × 106 RMB can be saved for a medium-scale paper mill with the annual production capacity of 105 t paper. Highlights • Mathematical model for the single-tier cylinder based paper drying process is proposed. • Both the steam-condensate system and the paper drying process are considered. • The simulation results are verified by the industrial data from a papermaking enterprise. [ABSTRACT FROM AUTHOR]

Pressure sensor, as one of the most common components in the sensing systems, has attracted plenty of attention in recent years with urgent needs. Herein, a highly sensitive flexible pressure sensor based on conducting polymer (CP)-coated paper is developed via an ultra-simple approach of synthesis and fabrication. This paper-based sensor displays an ultra-low detection limit as low as 0.3 Pa level, and outstanding sensitivity (∼2 kPa −1 , P  ≤ 75 Pa), which can rank the top among that of the reported pressure sensors. The advantages based on paper framework such as low cost, portability, and easy disposability further enhance its feasibility. Meanwhile, combining its rapid and precise response at room temperature and the recognized stability of PPy in the ambient environment, the sensor would ensure direct and continuous environment monitoring with low energy consumption. [ABSTRACT FROM AUTHOR]

Cogeneration is considered as one of the promising energy efficient techniques for producing electricity and useful thermal energy from a single fuel source. This paper describes a feasibility study of the implementation of different cogeneration options to a paper mill to evaluate their energy saving potentials and economic benefits. The investigated systems in this paper are gas turbine, steam turbine and combined cycle cogeneration options evaluated and compared based on energy utilisation factor and Annualised Life Cycle Cost (ALCC) analysis. The results of energy analysis show that all Combined Heat and Power (CHP) systems satisfy the thermal energy needs of the mill while the combined cycle cogeneration option generates the highest amount of electric energy equal to 10.91 MW. The gas turbine cogeneration system is shown as the most advantageous system from overall energy point of view with the highest energy utilisation factor of 78% meeting the heat and electric requirements of the mill and exporting 21,329 MWh of additional electricity to the grid. Economic feasibility results also show that an overall saving of 5.12 million US$ can be achieved by implementing the gas turbine cogeneration system to the mill making it as the best cogeneration option with the least overall ALCC of 1.34 million US$ and the maximum percentage of CO 2 emission reduction (68%) when compared with the other options. [ABSTRACT FROM AUTHOR]

The current study analyzed the high heating values (HHVs) of various waste biomass materials intending to the effective management and more sustainable consumption of waste as clean energy source. Various biomass waste samples including date leaves, date branches, coconut leaves, grass, cooked macaroni, salad, fruit and vegetable peels, vegetable scraps, cooked food waste, paper waste, tea waste, and cardboard were characterized for proximate analysis. The results revealed that all the waste biomass were rich in organic matter (OM). The total OM for all waste biomass ranged from 79.39% to 98.17%. Likewise, the results showed that all the waste biomass resulted in lower ash content and high fixed carbon content associated with high fuel quality. Based on proximate analysis, various empirical equations (HHV=28.296-0.2887(A)-656.2/VM, HHV=18.297-0.4128(A)+35.8/FC and HHV=22.3418-0.1136(FC)-0.3983(A)) have been tested to predict HHVs. It was observed that the heterogeneous nature of various biomass waste considerably affects the HHVs and hence has different fuel characteristics. Similarly, the HHVs of waste biomass were also determined experimentally using the bomb calorimeter, and it was observed that among all the selected waste biomass, the highest HHVs (21.19 MJ kg−1) resulted in cooked food waste followed by cooked macaroni (20.25 MJ kg−1). The comparison revealed that experimental HHVs for the selected waste biomass were slightly deviated from the predicted HHVs. Based on HHVs, various thermochemical and biochemical technologies were critically overviewed to assess the suitability of waste biomass to energy products. It has been emphasized that valorizing waste-to-energy technologies provides the dual benefits of sustainable management and production of cleaner energy to reduce fossil fuels dependency. However, the key bottleneck in commercializing waste-to-energy systems requires proper waste collection, sorting, and continuous feedstock supply. Moreover, related stakeholders should be involved in designing and executing the decision-making process to facilitate the global recognition of waste biorefinery concept. [Display omitted] • The high heating values (HHVs) of biomass waste were assessed with the aim for the sustainable consumption of waste as a source of clean energy. • All the biomass waste were rich in organic matter and fixed carbon content that ranged from 79.39% to 98.17% and 50.64%–54.26% respectively. • The maximum HHVs (21.19 MJkg−1) were recorded for cooked food waste. • The heterogeneous nature of various biomass waste considerably affects the HHVs and hence serve as suitable feedstock for various energy conversion technologies. [ABSTRACT FROM AUTHOR]