Search

Iron-enriched ferroelectrics are of particular interest as piezoactive components of piezoelectric-ferrite ME ceramics. This is due to the phase composition similarity and the reduction of expected interfacial doping effects during high-temperature calcination. This idea seems attractive, but laborious due to the significantly limited number of possible piezoelectric–ferrite combinations. Therefore, there is practically no data on such systems in the literature. ME composite ceramics based on the highly efficient Fe-containing Pb(Fe 0.5 Nb 0.5) 0.935 Ti 0.065 O 3 (PFNPT) ferroelectric has been studied. (100-х) wt.% Pb(Fe 0.5 Nb 0.5) 0.935 Ti 0.065 O 3 (PFNPT) + х wt.% Ni 0.9 Co 0.1 Cu 0.1 Fe 1.9 O 4-d (NCCF) composite systems has been obtained by the solid-state method at 1050 °C, with no foreign phases. The specimens densities amounted to ∼80% of the theoretical. It has been shown that the ME conversion efficiency and other composites properties are significantly influenced by the PFNPT precursor pre-treatment method. The maximum value of the ME coefficient ΔΕ/ΔΗ = 75 mV/(cm Oe) has been observed for specimens with x = 50–60 made from PFNPT powder with the addition of Li 2 CO 3. An increase in the ME composites sintering temperature to 1150 °C leads to the formation of Pb 2 Nb 2 O 7 foreign phase with a pyrochlore structure along the grain boundaries. The ME coefficient ΔΕ/ΔΗ does not exceed 15 mV/(cm⋅Oe). There is an threefold decrease in the composites piezoelectric parameters (piezoelectric coefficients d ij , g ij), as well as in their magnetic properties (magnetizations M S , M R) due to piezophase degradation, which is presumably associated with a change in the cations distribution over A and B sublattices of the spinel structure. [ABSTRACT FROM AUTHOR]