Search

This manuscript presents novel techniques for identifying the switch states, phase identification, and estimation of equipment parameters in multi-phase low voltage electrical grids, which is a major challenge in long-standing German low voltage grids that lack observability and are heavily impacted by modelling errors. The proposed methods are tailored for systems with a limited number of spatially distributed measuring devices, which measure voltage magnitudes at specific nodes and some line current magnitudes. The overall approach employs a problem decomposition strategy to divide the problem into smaller subproblems, which are addressed independently. The techniques for identifying switch states and system phases are based on heuristics and a binary optimization problem using correlation analysis of the measured time series. The estimation of equipment parameters is achieved through a data-driven regression approach and by an optimization problem, and the identification of cable types is solved using a Mixed-Integer Quadratic Programming solver. To validate the presented methods, a realistic grid is used and the presented techniques are evaluated for their resilience to data quality and time resolution, discussing the limitations of the proposed methods.

This paper presents novel methods for parameter identification in electrical grids with small numbers of spatially distributed measuring devices, which is an issue for distribution system operators managing aged and not properly mapped underground Low Voltage (LV) grids, especially in Germany. For this purpose, the total impedance of individual branches of the overall system is estimated by measuring currents and voltages at a subset of all system nodes over time. It is shown that, under common assumptions for electrical distsribution systems, an estimate of the total impedance can be made using readily computable proxies. Different regression methods are then used and compared to estimate the total impedance of the respective branches, with varying weights of the input data. The results on realistic LV feeders with different branch lengths and number of unmeasured segments are discussed and multiple influencing factors are investigated through simulations. It is shown that estimates of the total impedances can be obtained with acceptable quality under realistic assumptions.

Although electric power networks and district heating networks are physically coupled, they are not operated in a coordinated manner. With increasing penetration of renewable energy sources, a coordinated market-based operation of the two networks can yield significant advantages, as reduced need for grid reinforcements, by optimizing the power flows in the coupled systems. Transactive control has been developed as a promising approach based on market and control mechanisms to coordinate supply and demand in energy systems, which when applied to power systems is being referred to as transactive energy. However, this approach has not been fully investigated in the context of market-based operation of coupled electric power and district heating networks. Therefore, this paper proposes a transactive control approach to coordinate flexible producers and consumers while taking into account the operational aspects of both networks, for the benefit of all participants and considering their privacy. A nonlinear model predictive control approach is applied in this work to maximize the social welfare of both networks, taking into account system operational limits, while reducing losses and considering system dynamics and forecasted power supply and demand of inflexible producers and consumers. A subtle approximation of the operational optimization problem is used to enable the practical application of the proposed approach in real time. The presented technique is implemented, tested, and demonstrated in a realistic test system, illustrating its benefits., Comment: 35 pages, 16 Figures

This paper presents a dynamic Frequency Regulation (FR) model of a large interconnected power system including Energy Storage Systems (ESSs) such as Battery Energy Storage Systems (BESSs) and Flywheel Energy Storage Systems (FESSs), considering all relevant stages in the frequency control process. Communication delays are considered in the transmission of the signals in the FR control loop and ESSs, and their State of Charge (SoC) management model is considered. The system, ESSs and SoC components are modelled in detail from a FR perspective. The model is validated using real system and ESSs data, based on a practical transient stability model of the North American Eastern Interconnection (NAEI), and the results show that the proposed model accurately represents the FR process of a large interconnected power network including ESS, and can be used for long-term FR studies. The impact of communication delays and SoC management of ESS facilities in the Area Control Error (ACE) is also studied and discussed, Comment: 8 pages, 9 figures, 6 tables. Submitted to IEEE Transactions on Power System (September 2020)