Search

Summary: This effort is founded on the modeling and simulation of the GaAsPN/GaP quantum dot (QD) solar cell. This quaternary alloy is one of the III‐V semiconductors, which gained importance in the recent years for optoelectronic applications. This importance comes from the fact that the quaternary GaAsPN can be a well‐grown lattice matched to GaP and Si substrates and to the bandgap that can be decreased drastically with the incorporation of nitrogen and arsenic into GaP, improving consequently the absorption and the wavelengths near the red part. These qualities make GaAsPN a good candidate for the growth on the Si substrate and low‐cost solar cell fabrication. The optical properties of GaAsPN/GaP QDs, such as strain, critical thickness, bandgap energy, the external quantum efficiency, and absorption coefficient, have been reported. The heterostructures consist of GaAs0.18P0.814N0.006 QDs separated by GaP barrier layers. The width and thickness of QDs are about 5 and 5 nm, respectively. Our results have been shown that 20 GaAs0.18P0.814N0.006/GaP QD layers produce a short‐circuit current of about 3.55 mA/cm2 and an efficiency of about 7.5%. In addition, we will be able to extend the absorption edge of a GaP solar cell from 0.48 μm to 0.5 μm for the same QD number layers inserted. The temperature effect on efficiency is considered. [ABSTRACT FROM AUTHOR]

• The lattice matching condition determination in order to obtain stable structure. • Physical and optical parameters determination at room temperature. • Emphasizing the impact of the absorption coefficient on the frequency response. • Frequency response optimization of the new pin photodiode structure. • Managing the frequency response limitations through the transparent layers. • Total frequency response calculation and highlighting its limitations. This paper reports on pin photodiode frequency response optimization based on In x Ga 1-x As 1-y N y quaternary lattice matched to GaAs. Two transparent layers are placed on p-side and n-side in order to manage the photodiode frequency response limitations. The lattice matching condition is calculated in order to obtain stable structure. The physical and optical parameters calculations are performed at room temperature showing the impact of nitrogen on the absorption coefficient. A stable structure, having 2 % of nitrogen and 6% of indium, allows to achieve a cutoff frequency of about 116 GHz and a capacitance of 5.21fF while the quantum efficiency is 41.59% for a depletion region thickness of about 0.55 µm. However, in case of depletion region thickness of about 0.625 µm, the cutoff frequency degrades to 98 GHz while the capacitance diminishes to 4.58fF and the quantum efficiency increases to 51.56%. In addition, a comparative study with literature results has been carried out in order to show the advantages of the proposed photodiode. This comparison affirms that the proposed photodiode based on InGaAsN lattice matched to GaAs exhibits high-speed photo-detection. This work allowed us to obtain a p-i-n photodiode with stable structure suitable for photo-detection at 1.15 µm. [ABSTRACT FROM AUTHOR]