Search

Rare earth elements such as neodymium (Nd) are important elements used mainly in developing new technologies. Although they are found in low concentrations in nature, they can be obtained by extracting solid samples such as phosphogypsum. Among the techniques, adsorption has been used successfully with several adsorbent materials. In this work, two strains of Spirulina platensis (LEB-18 and LEB-52) were employed as biosorbents for efficiently removing the Nd element from the aqueous media. Biosorption tests were carried out in a batch system, and the results of the biosorption kinetics showed that for both materials, the biosorption of Nd was better described by the Avrami model. Moreover, it could be considered that 80 min would be necessary to attain the equilibrium of Nd(III) using both biosorbents. The result of the biosorption isotherms showed that for both strains, the best-fitted model was the Liu model, having a maximum biosorption capacity of 72.5 mg g−1 for LEB-18 and 48.2 mg g−1 for LEB-52 at a temperature of 298 K. Thermodynamics of adsorption showed that for both LEB-18 and LEB-52 the process was favorable (∆G° < 0) and exothermic (∆H° −23.2 for LEB-18 and ∆H° −19.9 for LEB-52). Finally, both strains were suitable to uptake Nd, and the better result of LEB-18 could be attributed to the high amount of P and S groups in this biomass. Based on the results, a mechanism of electrostatic attraction of Nd3+ and phosphate and sulfate groups of both strains of Spirulina platensis was proposed. [ABSTRACT FROM AUTHOR]

• Two new adsorbents were prepared for dye adsorption from aqueous solution. • Statistical physics modeling was performed to characterize dye adsorption mechanism. • Physical interactions were involved in the endothermic dye adsorption. • Dye adsorption capacities ranged from 281 to 632 mg/g. Activated carbons were prepared from ashitaba waste and a walnut shell to study the adsorption mechanism of congo red and methylene blue dyes in aqueous solution. These adsorbents were characterized via XRD, FTIR and SEM techniques and the dye adsorption isotherms at three temperatures were quantified. A statistical physics model was applied to interpret the adsorption mechanism of tested dyes and adsorbents. Modeling results showed that these dyes were practically separated in the solution leading to an absence of the aggregation process. Adsorption orientations of dye molecules on the adsorbents changed depending on the temperature and nature of systems. The adsorption capacity of ashitaba waste activated carbon for the removal of congo red was significant thus indicating strong interactions between this dye and tested adsorbent. Calculated adsorption energy varied from 7.25 to 20.43 kJ/mol and they showed that the adsorption of both adsorbates occurred via physical interactions at different temperatures where the removal process was endothermic. [ABSTRACT FROM AUTHOR]