Search

Climate classifications are useful to synthesize the physical state of the climate with a proxy that can be directly related to biota. However, they present a potential drawback, namely a strong sensitivity because of the use of hard thresholds (step functions). Thus, minor discrepancies in the base data produce large differences in the type of climate. However, such an a priori limitation is also a strength because such sensitivity can be used to better gauge model performance. Although previous attempts of classifying climates of the world using global climate model outputs were encouraging, the applicability of their classifications to impact studies has been limited by past model issues. Notwithstanding the persistence of certain imperfections and limitations in current models, the high‐quality physical simulations from phase six of the Coupled Intercomparison Project (CMIP6) has opened new possibilities in the field, thanks to their improved representation of atmospheric and oceanic physics. The purpose of this paper is twofold: to show that climate classifications from CMIP6 are sufficiently robust for use in impact studies, and to use those classifications for identifying error sources and potential issues that deserve further attention in models. Thus, 52 CMIP6 climate models were evaluated by using three climate classifications schemes, classical Köppen, extended‐Köppen, and modified Thornthwaite. We first assessed model ability to reproduce present climate types by comparing their outputs with observational data. Models performed best for the Köppen and extended‐Köppen classification methods (Cohen's kappa κ = 0.7), and had moderate scores for the Thornthwaite climate classification (κ = 0.4). By tracing back the observed biases, we were able to pinpoint the misrepresentation of dry climates as a major source of error. Another finding was that most models still had some difficulties in representing the seasonal variability of precipitation over several monsoonal regions, thereby yielding the wrong climate type there. Models were also evaluated for future climate. Substantial changes in climate types are projected in the SSP5‐8.5 scenario. These changes include a shrinkage of polar/frigid climates (22%) and an increase of dry climates (7%). [ABSTRACT FROM AUTHOR]

Gridded precipitation datasets have been developed for data assimilation and evaluation tasks of weather and climate models and for climate analyses. Gridded data uncertainty evaluation is crucial to understand the limitations and feasibility. The development of high‐resolution daily gridded precipitation datasets is desirable, but several factors need to be considered, namely rain gauge station availability, their spatial distribution, and orographic and climate characteristics of a study area. Quality assessment of gridded datasets can present difficulties when the influence of these factors is not thoroughly analysed. The main objective of this study was a detailed validation of precipitation grids based on four factors, that is, station density used for grid construction, grid spatial resolution, station altitude, and climate type. To this end, 18 grids were built using six spatial resolutions (0.01°, 0.025°, 0.05°, 0.1°, 0.2° and 0.4°) and three station densities (25, 50 and 75% of all available stations). Results indicate larger differences among the grids as a function of analysed factors. Station density was found to be the main factor, whereas grid spatial resolution had minor importance. However, the latter factor becomes more relevant in areas with strong altitude gradients and when a high station density is available. In addition, weak and moderate precipitation is overestimated on daily grids, whereas heavy precipitation cells are less frequent, reducing data variability. On the contrary, monthly and annual aggregates present less deviation from the observed distribution than daily comparisons. These findings question the applicability of the daily grid datasets for validation studies and climate analysis on a grid cell level. [ABSTRACT FROM AUTHOR]

Abstract The microphysics of precipitation has to be parameterized in Earth System Models (ESM), Global Circulation/Climate Models (GCMs), Cloud Resolving Models (CRMs), Regional Climate Models (RCMs), and Numerical Weather Prediction (NWP) models since the relevant physical processes operate at centimeter scale, thus well below the finest model grid size. While more than 20 bulk microphysics schemes have been described in the literature, they all have a number of empirical values and work under a set of reasonable assumptions that treat the problems in a simplified way. This paper discusses these choices in order to present a homogenous account of the physics within the parameterizations, and illustrates how observations can help improve our present understanding of precipitation physics. The Weather and Forecasting Research model (WRF), and the Community Atmosphere Model (CAM) in the Community Earth System Model (CESM) are used as prototypes of full-confidence models. This contribution can also help frame and advance research into the human-induced, ongoing climate change as those parameterizations are instrumental for the appropriate ESM modeling of future climates. Highlights • This paper provides an account of the empirical data and assumptions behind the microphysics in models. • A new scheme to describe each microphysical process is provided. • The physics can be traced back to a few papers that reveals the assumptions and empirical choices made. [ABSTRACT FROM AUTHOR]

Estimating extreme precipitation events over complex terrain is challenging but crucial for evaluating the performance of climate models for the present climate and expected changes of the climate in the future. New satellites operating in the microwave wavelengths have started to open new opportunities for performing such estimation at adequate temporal and spatial scales and within sensible error limits. This paper illustrates the feasibility and limits of estimating precipitation extremes from satellite data for climatological applications. Using a high-resolution gauge database as ground truth, it was found that global precipitation measurement (GPM) constellation data can provide valuable estimates of extreme precipitation over the southern slopes of the Pyrenees, a region comprising several climates and a very diverse terrain (a challenge for satellite precipitation algorithms). Validation using an object-based quality measure showed reasonable performance, suggesting that GPM estimates can be advantageous reference data for climate model evaluation. [ABSTRACT FROM AUTHOR]

Snowfall in elevated areas of the mid-latitudes has a strong impact on infrastructure, freshwater availability, and the climate system. The Cantabrian Mountains of the northwestern Iberian Peninsula are very vulnerable to climate change because of their moderate altitudes, which limits their snowfall. Monitoring snow events is essential for the evaluation of weather and climate prediction models. However, measurement networks are scarce in mountainous areas and have great uncertainties because of blizzards. In this study, a multiphysics ensemble of the Weather Research and Forecasting (WRF) model was designed using three microphysics and two planetary boundary layer (PBL) schemes to simulate nine snowfall events in the Cantabrian Mountains during autumn and winter 2021–2022. The WRF was validated using several snow characteristics, such as liquid water equivalent, snow cover, and snow depth. Liquid water equivalent was evaluated using snow-gauge networks and satellite products in an assessment of snow cover. In addition, a monitoring network of webcams and snow poles was implemented, improving the low density of snow observations in the mountains. The results showed good model performance for detection of snow cover and slight overestimation of liquid water equivalent and snow thickness, which may have been caused by under-catchment that is generally an effect of wind on the measurement systems and by snow compaction, respectively. Morrison microphysics and Mellor-Yamada-Nakanishi-Niino (MYNN PBL) yielded better results for liquid water equivalent at higher altitudes and output greater snow cover. The results help determine the best configurations for snow modelling in the study area to develop future studies of the spatiotemporal patterns of snow distribution. • Monitoring system of snow events in Cantabrian Mountains has been developed. • We selected nine snowfall events during autumn and winter 2021–2022. • Three microphysics and two PBL parameterizations were tested. • Morrison microphysics and MYNN PBL yielded better results at higher altitudes. [ABSTRACT FROM AUTHOR]

Climate classifications based on temperature and precipitation measurements are increasingly being used for environmental and climate change studies. Using three classification methods (Köppen, Extended Köppen, and Holdridge) and one observational dataset for present climate (CRU, Climate Research Unit), we show that GCMs have bridged the gap that led to the emergence of RCMs thirty years ago, as GCMs can now provide global climate classifications whose accuracy and precision are comparable to those of regional outputs of the RCMs. Projections of high-resolution GCMs for future climates under the assumptions of three Representative Concentration Pathways (RCP26, RCP45 and RCP85) can therefore be used as a primary source for climate change and global warming studies at high resolution. This paper provides comprehensive, model-derived climate classifications for the entire planet, using RCMs and two GCMs for present and future climate-change scenarios, and discusses how well the models actually represent the climates of the world when compared with reference, ground validation data. It turns out that both GCMs and RCMs appear still limited to provide practical estimates of the world climates even for present climate conditions. The modeling of precipitation remains the Achilles' heel of models and thus of multidimensional indices, which are very sensitive to this variable. The conclusion is that model outputs at regional scale need to be taken with extreme caution without venturing into informing policies presenting potentially large societal impacts. Nonetheless, the role of models as privileged tools to advance our scientific knowledge of the Earth's system remains undisputed. • A systematic analysis of climate classifications with RCMs and two high resolution GCMs is presented. • Three classification methods are used to illustrate the differences between models and observations. • Current high-resolution GCMs can provide climate classifications with the same accuracy as those from RCMs. • Uncertainties in modeling precipitation persist for large parts of the world. [ABSTRACT FROM AUTHOR]

Precipitation is one of the most relevant fields in atmospheric modeling because of its environmental, social and economic implications. However, precipitation validation from weather model outputs presents substantial challenges, such as measurement uncertainties, use of gridded datasets vs. direct observations, and the selection of statistical goodness-of-fit measures. The main difficulty of working with precipitation is that it can be spatially irregular, especially in extreme events. High temporal aggregation smooths the field and reduces verification uncertainty. For this reason, validations are usually focused on a daily scale. However, many extreme events occur on shorter periods, for which a sub-daily precipitation assessment is required. In this paper, hourly precipitation verification of the Weather Research and Forecasting (WRF) model is explored for 45 extreme precipitation events (EPEs) recorded in northeastern Spain. For this, stations with recorded EPEs were classified according to the hourly distribution of precipitation. WRF simulations were established considering three microphysics and two planetary boundary layer (PBL) parameterizations. Finally, several statistical goodness-of-fit measures and spatial and temporal precipitation distributions were used for evaluating WRF performance. The results showed that microphysics were more important than PBL parameterizations. Goddard and Thompson together with Mellor-Yamada-Nakanishi and Nino PBL gave better results for most of the analyzed characteristics. However, an optimal combination of parameterizations was not obtained for all EPEs, because event characteristics had important effects on model performance. • Hourly precipitation verification of the WRF model has been explored. • We selected 965 stations where extreme precipitation was recorded. • Three microphysics and two planetary boundary layer parameterizations were tested. • Goddard and Thompson together with Mellor-Yamada-Nakanishi and Nino gave better results. [ABSTRACT FROM AUTHOR]

Regional Climate Models (RCMs) emerged 30 years ago as a transient tool to provide detailed estimates of meteorological parameters (temperature, precipitation, humidity, wind, and others) for regional applications. Their dynamic downscaling approach was intended to fill the gap between the global but coarse estimates of Global Climate/Circulation Models (GCMs), which typically had a 2.5° resolution, and practical requirements such as estimating precipitation for hydrologic operations in small basins under conditions of increased greenhouse gas emissions. Over the three decades, RCMs provided data to inform policies and helped to increase knowledge of the present climate and the impacts of global warming at regional level. This paper describes the major achievements of RCMs, critically reviewing the main issues and limitations that have been featured in the literature. It puts forward a controversial claim aimed at starting a debate in the climate community, namely, that the cycle of RCM research has reached an end for informing policies. This is because these models have recently been superseded for that purpose by high-resolution GCMs and Earth System Models (ESM). • The paper reviews the main issues and achievements of RCMs since its inception 30 years ago. • Current high-resolution GCMs may supersede RCMs for informing policies. • RCMs may still be useful for benchmarking new parameterizations and rapid prototyping. [ABSTRACT FROM AUTHOR]