Search

Metasurfaces, composed of micro-nano-structured planar materials, offer highly tunable control over incident light and find significant applications in imaging, navigation, and sensing. However, highly efficient polarization devices are scarce for the extended shortwave infrared (ESWIR) range (1.7~2.5 μm). This paper proposes and demonstrates a highly efficient all-dielectric diatomic metasurface composed of single-crystalline Si nanocylinders and nanocubes on SiO2. This metasurface can serve as a nanoscale linear polarizer for generating polarization-angle-controllable linearly polarized light. At the wavelength of 2172 nm, the maximum transmission efficiency, extinction ratio, and linear polarization degree can reach 93.43%, 45.06 dB, and 0.9973, respectively. Moreover, a nonpolarizing beam splitter (NPBS) was designed and deduced theoretically based on this polarizer, which can achieve a splitting angle of ±13.18° and a phase difference of π. This beam splitter can be equivalently represented as an integration of a linear polarizer with controllable polarization angles and an NPBS with one-bit phase modulation. It is envisaged that through further design optimization, the phase tuning range of the metasurface can be expanded, allowing for the extension of the operational wavelength into the mid-wave infrared range, and the splitting angle is adjustable. Moreover, it can be utilized for integrated polarization detectors and be a potential application for optical digital encoding metasurfaces. [ABSTRACT FROM AUTHOR]

The emergence of new materials and fabrication techniques provides progress in the development of advanced photonic and communication devices. Transition metal dichalcogenides (e.g., molybdenum disulfide, MoS2) are novel materials possessing unique physical and chemical properties promising for optical applications. In this paper, a metasurface composed of particles made of bulk MoS2 is proposed and numerically studied considering its operation in the near‐infrared range. In the bulk configuration, MoS2 has a layered structure being a uniaxial anisotropic crystal demonstrating an optical birefringence property. It is supposed that the large‐scale and uniform MoS2 layers are synthesized in a vertical‐standing morphology, and then they are patterned into a regular 2D array of disks to form a metasurface. The natural anisotropy of MoS2 is utilized to realize the splitting of electric and magnetic dipole modes of the disks while optimizing their geometric parameters to bring the desired modes into overlap. At the corresponding resonant frequencies, the metasurface behaves as either an electric or a magnetic mirror, depending on the polarization of incident light. Based on the extraordinary reflection characteristics of the proposed metasurface, it can be considered an alternative to traditional mirrors and optical splitters when designing compact and highly efficient metadevices, which provide polarization and phase manipulation of electromagnetic waves on a subwavelength scale. [ABSTRACT FROM AUTHOR]

Polarization plays a critical role in optical systems that range from optical communications to imaging, lithography, metrology, and data storage. Thus, in systems that need to generate a certain polarization state, a light source (e.g., laser) is combined with polarization control elements such as polarizers, polarizing beam splitters, and waveplates. Similarly, in systems requiring polarization state detection, such elements are combined with photodetectors. There is currently a trend toward miniaturized optical systems. This motivates the question of how to achieve what may be argued as an ultimate level of miniaturization: a single chip that can both generate light with a prescribed polarization state and detect the polarization state of light impinging upon it. This paper demonstrates this via vertical cavity surface emitting lasers (VCSELs) with on‐facet metasurfaces. Two classes of devices are demonstrated. The first class uses high‐index dielectric metasurfaces (amorphous silicon nanofins), whereas the second class uses plasmonic metasurfaces (aluminum bilayer gratings). Each can operate as a laser (to generate) and as a photodetector (to detect) circularly or linearly polarized light. [ABSTRACT FROM AUTHOR]

Featured Application: The possible application of the considered effects can be associated with the design and development of a three-frequency narrowband polarizing beam splitters used in an optical routing systems. The features of polarization control of multiple multiresonances for quasi-trapped modes excited by synchronization of bianisotropic dipole responses in MoS 2 disks with a hole are considered. Using numerical calculations with analytical multipole analysis, we showed that the presence of a strong optical anisotropy of MoS 2 nanoparticles provides an additional degree of freedom and makes it possible to observe several resonances of electric and magnetic dipoles at once in a narrow spectral range. Based on the simulation results, we obtained the frequency dependences for the dipole polarizabilities of the MoS 2 disk with a hole, which can be used to distinguish the contributions of the nonlocal and bianisotropic dipole responses and possessing several features in the near-infrared range. Using the polarizability spectra of single nanoparticles and applying the tuning strategy, the design of the MoS 2 metasurface placed in air and supporting three resonances of quasi-trapped modes at once in a narrow spectral range was developed. One of these resonances corresponds to the telecom wavelength of about 1550 nm. The spectrum of light reflection for the MoS 2 metasurface is characterized by three narrowband dips corresponding to the wavelengths of the quasi-trapped modes. It was shown that a change in the polarization of a wave normally incident on the metasurface to orthogonal one leads to a change in the type of bianisotropic response excited in each MoS 2 disk and to the excitation of three other features in the reflection spectrum of the metasurface at wavelengths close to the initial values. [ABSTRACT FROM AUTHOR]

Multifunctional ultra‐thin devices which can manipulate the wavefront in a desired manner are preferably required for compact systems. In recent years, metasurfaces have been treated as an intuitive and powerful platform to expand the operational capacity of planar devices. In this work, a non‐interleaved device based on metasurfaces is proposed which utilizes transmitted co‐and‐cross polarization channels of circularly polarized (CP) light to design a spin‐switchable Wollaston‐and‐Rochon‐prism‐like CP beam splitter. In addition, this scheme facilitates the design of meta‐hologram that can decrypt two independent holographic images, one on each CP transmitted channel, under the right‐handed circularly polarized light. While, under the left‐handed circularly polarized light, the co‐polarization channel reconstructs the holographic image and no image appears on the cross‐polarization channel. The intended approach provides a promising route which will find application in information encryption/decryption, multichannel communication systems, and imaging. [ABSTRACT FROM AUTHOR]