Search

The health risks associated with exposure to respirable dust in coal mines have been attracted much attention by an increasing number of researchers. However, the accurate identification of potentially hazardous agents in respirable dusts and the evaluation of the potential health risks arising from it still remains controversial to varying degrees. A comprehensive understanding of the physicochemical properties of respirable dust is a prerequisite and an important basis for resolving this controversy. Therefore, in this study, the particle size distribution and morphology, pore structure, mineralogical and geochemical patterns, and oxidative potential (OP) of respirable coal mine dust were comprehensively investigated. Stepwise multiple linear regression was employed to identify dust components driving OP, such as anatase, tobelite, quartz, and ankerite, in respirable coal mine dust, along with Na, Ni, Se, W, and As. On this basis, we performed a single-factor risk prediction for different coal mines by considering factors that may impact miners' health, with the analyses yielding somewhat contradictory results. Therefore, a multifactor integrated prediction model is proposed using an entropy-based technique for order preference by similarity to the ideal solution to categorize coal mines in the study area into three risk categories, high-, medium-, and low-risk dust mines, which is important for the hierarchical classification and control of coal mines and for formulating appropriate dust prevention and control measures. [Display omitted] • A comprehensive investigation of the physicochemical and oxidative potential characteristics of respirable coal mine dust (RD). • Stepwise multiple linear regression was employed to identify the potentially hazardous agents of RD. • The TOPSIS was used to comprehensively evaluate health risks in various coal mines and sites within those mines. [ABSTRACT FROM AUTHOR]

Oxidative potential (OP) is considered to be an efficient indicator of particulate matter (PM) to induce oxidative stress in the lungs and is increasingly considered to be a relevant health metric. In this study, two complementary OP assays were deployed, including dithiothreitol (DTT) and ascorbic acid (AA) assays, to investigate the potential toxicity (as generators of oxidative stress) of respirable fractions (DD4, < 4 μm) of deposited dust (DD500, < 500 μm) in underground low-S and low-pyrite coal mines in Henan Province, Central China. The OPDTT of DD4 is higher than that reported for other types of atmospheric PM, whereas the OPAA of DD4 is similar and/or slightly higher. Cross-correlation and multilinear regression analyses are applied using datasets of major mineral and geochemical patterns in the DD4 samples and the respective OP values to identify the major drivers for OP in respirable coal dust. Thereafter, the patterns of DD4 are compared with those of DD500 and the parent coals to determine the sources of OP-relevant substances. OPDTT is mainly governed by some trace elements (Sb, As, Li, B, Sr, and Pb) and minor minerals (anatase, quartz, siderite), and their synergistic effect may be one of the reasons for the high DTT consumption. For OPAA, quartz, total clay (sum of illite, kaolinite, tobelite, and clinochlore) and Ni, Cr, Co, Si, and S, play an important role in regulating the OPAA of pyrite-free DD4 samples. These OP-relevant substances have three sources: coal dust, which has a similar composition in DD4, DD500, and the parent coal (such as siderite and its associated elements); gangue dust, which does not occur in the parent coal but is widely detected in DD4 and DD500 (such as quartz, kaolinite, and relevant elements); and cement dust (from gunite galleries), which is mainly calcite- and calcite-associated elements. • A study of the mineralogy, geochemistry and OP of deposited dust, respirable dust and coal in underground coal mines. • OPDTT of size-segregated respirable dust (DD4) is mainly governed by anatase, siderite, quartz, and Sb, As, Li, B, Sr, Pb. • OPAA of DD4 is regulated by anatase, tobelite, kaolinite, and total clay, as well as Ni, Cr, Co, Si, and S. • The parent coal dust, gangue dust, and cement dust are the primarily source of these hazardous materials. [ABSTRACT FROM AUTHOR]

This study systematically investigates the mineralogical and geochemical variations in parent coal, coal gangue (roof, parting, and floor), deposited coal mine dust (DD), and respirable fractions of DD (RD) in an underground coal mine using the blasting mining method in China to evaluate the major sources of DD. The emission of dust in this study is affected by coal gangue sources during the mining process, which causes different geochemical patterns in the DD samples. Moreover, weathering of the cement gunite walls plays an important role in the enrichment of specific elements in the DD from air uptake and air out galleries. Furthermore, the spatial variation in RD characteristics, including mineralogy, geochemistry, and oxidative potential (OP), is discussed, with emphasis on the major health-relevant species and elements. Organic species from coal dust seem to be the essential components contributing to OP rather than metals, although some metals (e.g., Cr, Co, Ge, Se, Zn, Ba, Rb, Cs, Sn, and Pb) influence OP to some degree. [Display omitted] • Deposited coal mine dust, parent coal, and gangue in an underground coal mine using blasting mining method were studied. • Gangue and cement dust mixed into coal dust result in the enrichment of abundant elements. • The primary species driving the oxidative potential are site-dependent. • Organic species, quartz, calcite, and Cr, Co, Ge, Zn, Ba, Rb are highly correlated with toxicity. [ABSTRACT FROM AUTHOR]

Coal mining in China is continually increasing, and the associated emitted coal mine dust is of growing environmental and occupational concern. In this study, deposited coal mine dust (DD) was analysed in three different regions of an active, highly-volatile bituminous open-pit coal mine in the Xingjian Province, Northwest of China: coal working fronts, tailings handling sites, and road traffic sites. Samples were analysed for particle size, and geochemical and mineralogical patterns, and then compared with the respirable DD fractions (RDDs, <4 μm) separated from DD samples. Online measurements of ambient air concentrations of particulate matter (PM 10 and PM 2.5), black carbon (BC) and ultrafine particles (UFP) were performed in the same mine zones where DD was sampled. Furthermore, the RDD samples were subjected to analysis of specific biological response or toxicological indicators (oxidative potential, OP). The results demonstrated: i) large differences in particle size and composition among DD from tailings handling, road traffic and coal working front sites, ii) a strong influence of the DD moisture contents and ash yields on particle size, and, accordingly, on the potential dust emissions, iii) an enrichment of multiple elements (such as Nb, Th, Cr, Sr, Li, As, Pb, Cu, Zr and Ni) in the RDD from coal working fronts compared with their contents in the worked parent coal seams, mostly attributed to mining machinery, tyre and brake wear emissions and to deposition of dust emitted from gangue working zones, iv) low OP values of the RDD emitted from the studied mine, which works a high-quality coal, with OP being influenced by Mn, sulphate and anatase (TiO 2) contents, and v) the impact of specific mining operations and mine areas on the levels of air pollutants, such as high PM from tailings handling in the upper parts of the mine or the high UFP levels in the bottom of the mine (due to vehicle and machinery emissions and lower dispersive conditions). The data presented here demonstrate the necessity of extracting the more deeply respirable size fraction of coal mine dusts in future studies on the health effects of these materials because this finer fraction is mineralogically and geochemically different from the parent rocks. • High impact of specific mining operations in ambient air pollutants. • Particle size distribution of deposited dust (DD) was different over mine sites. • Moisture and ash have strong influence on respirable DD (RDD) emissions. • Enrichment of multiple elements in RDD attributed to mining activities. • Oxidative potential of RDD is influenced by Mn, sulphate and anatase contents. [ABSTRACT FROM AUTHOR]

• Respirable fraction of dust deposited inside coal mines was extracted and analysed • Respirable coal dust is enriched in minerals related to parent coal geochemistry • Deposited coal mine dust can be used as a proxy for the geochemistry of PM10 • Fe, Si, Mn, Ba and particle size of coal dust are highly correlated with toxicity We focus on a comparison of the geochemistry and mineralogy patterns found in coal, deposited dust (DD), respirable deposited dust (RDD) and inhalable suspended dust (PM10) from a number of underground mines located in China, with an emphasis on potential occupational health relevance. After obtaining the RDD from DD, a toxicological analysis (oxidative potential, OP) was carried out and compared with their geochemical patterns. The results demonstrate: i) a dependence of RDD/DD on the moisture content for high rank coals that does not exist for low rank coals; ii) RDD enrichment in a number of minerals and/or elements related to the parent coal, the wear on mining machinery, lime gunited walls and acid mine drainage; and iii) the geochemical patterns of RDD obtained from DD can be compared with PM10 with relatively good agreement, demonstrating that the characterization of DD and RDD can be used as a proxy to help evaluate the geochemical patterns of suspended PM10. With regards to the toxicological properties of RDD, the Fe content and other by-products of pyrite oxidation, as well as that of anatase, along with Si, Mn and Ba, and particle size (among others), were highly correlated with Ascorbic Acid and/or Glutathione OP. [ABSTRACT FROM AUTHOR]