Search

Despite an increased awareness about energy conservation in the past decade, the energy consumed for water heating has increased by 7% from 2008 (17%) to 2018 (24%) in Hong Kong. A literature review on existing energy-saving technologies during showering showed that occupants' behavior significantly impacted energy consumption. However, the exact relationship between them was not yet fully understood. Therefore, this study developed a mathematical energy consumption model to investigate the relationship between occupants' behavior and energy consumption during showering. This relationship identified an effective energy-saving strategy in the shower without scarifying occupants' thermal comfort. The main variables that influence energy consumption and thermal comfort in bathrooms namely air temperature, water temperature, ventilation rate, and water flow rate, were considered. It was found that among them, water flow rate and ventilation rate are the most and least influential variables, respectively, in energy saving. Therefore, the ventilation rate was suggested to be at least 0.03 kg·s−1, and the water flow rate was meant to be lower than 0.15 kg·s−1 (based on related requirements). These findings could help residential occupants and facility managers determine the optimal showering settings for thermal comfort, energy consumption, and environmental effects. [ABSTRACT FROM AUTHOR]

• A POE-integrated simulation method is proposed to address energy occupant behavior. • Opening windows and operating AC were found to co-exist which affects simulation accuracy. • The new method improves energy simulation accuracy by 14% for domestic areas. • The method improves energy simulation accuracy by 16% for total building areas. Occupant behavior plays a critical role in building energy consumption, particularly in residential buildings. However, occupant behavior is complicated and varies significantly from case to case. Also, energy modeling of high-rise buildings is far less explored than that of low- or medium-rise buildings. This paper aims to improve accuracy in building energy simulation by utilizing Post Occupancy Evaluation (POE) data to calibrate energy model. Drawing on a review of the literature of occupant behavior and building energy modeling, the paper provides a calibration method of integrating POE data into an energy model, which is demonstrated using a real-life typical 40-storey residential building in Hong Kong. The developed method addresses seven updated input parameters, namely, schedule, devices, air-conditioners, windows, lights, domestic hot water, and cooking. By comparing the two energy modeling processes, i.e. with and without POE input, and their resultant estimated energy consumption, the paper quantifies the impact of occupant behavior on building energy consumption. Annual metered data together with energy bills obtained from the POE were utilized to validate the models. The results show that the use of the developed POE-integrated method helped to improve accuracy in energy consumption prediction by 14% for the total building floor area and by 16% for the total residential area. From examining the impacts of the seven input parameters, the paper reveals the key energy use sensitive occupant behaviors within high-rise residential buildings in Hong Kong. These include: the number of residents in each unit; adoption of window type and split type of air-conditioners; window and air condition operation modes; cooking time on weekdays and weekends; and time spent on hot water showering. The developed method can assist building designers and services engineers to estimate building energy use more accurately and provides a scenario analysis tool for clients and facility managers to develop effective energy conservation strategies. [ABSTRACT FROM AUTHOR]

The estimation of solar heat gain via vertical fenestration is important in energy-efficient building design and operation especially for subtropical Hong Kong. Being one of the most populated cities in the world, buildings in Hong Kong tend to be densely constructed. In this regard, the shading effect of surrounding buildings could significantly limit solar radiation from the sun and sky to the window while certain amount of solar radiation would be reflected from the opposite façades. This paper presents a calculation approach to compute solar radiation on obstructed fenestration for both overcast and non-overcast skies. Performance of the proposed method is evaluated by comparing with simulated results of a sophisticated lighting program and field measurements. The findings are essential for the assessment of both active and passive building energy saving techniques including shading and building integrated photovoltaic systems in metropolitan environment. [ABSTRACT FROM AUTHOR]