Search

This paper presents a methodology that allows for calculating the thermal and electric energy consumption together with CO2 emissions of cities by inhabitant and household based on climate, only making use of publicly available data. With this aim, climate was analysed and cities were classified based on it. The analysis of those cities' energy consumption and CO2 emissions allowed for drawing conclusions. Once aware of the climate zones in which energy consumption and emissions are higher, these mentioned conclusions could help to take further actions. An index has been defined to facilitate this analysis. This paper shows the case of Spain for illustrative purposes. This type of study has been carried out in some detail in many countries, but not in Spain yet. This paper tries as well to fill the existing gaps in studies that relate climate to thermal and electric energy consumption. For this purpose, it analyses the 145 cities in Spain that have more than 50,000 inhabitants. Knowing all this is essential in all regions and countries. It will allow for taking proper actions for promoting the energy saving and the use of alternative energy sources that reduce CO2 emissions. According to the study carried out in this paper, the extremer the climate of a city is, the higher the thermal energy consumption is. This consumption decreases in softer climates. However, electric energy consumption is similar in all cities independent of the climate they have. With regard to CO2 emissions, it was calculated that the higher the energy consumption of a city is, the higher these emissions are. [ABSTRACT FROM AUTHOR]

This paper develops a novel index of vulnerable homes in terms of fuel poverty that is based on the analysis of different existing fuel poverty indicators and their relationship to the residential sector. The new index of vulnerable homes unifies the many indicators hitherto employed, and assesses the home vulnerability situation regardless of whether or not it is in fuel poverty by using three dimensions: monetary cost, energy and thermal comfort. The monetary dimension analyses vulnerability in relation to the available net income to face everyday life. The energy variable assesses the vulnerability related to the constructive characteristics of the dwelling. Finally, the introduction of the thermal-comfort variable enables the evaluation of the vulnerability related to the inner temperature of the dwelling and its perception by occupants. The combination of the different resulting values in each dimension and its relationship to the quality of life of occupants establishes a hierarchy of vulnerable levels. As a result, a multi-dimensional index is defined which relates technical aspects (characteristics of the dwelling) and social aspects (quality of life of households). The index of vulnerable homes provides a more complete assessment of the home situation than the existing fuel poverty indicators by identifying which variables require a greater assistance. [ABSTRACT FROM AUTHOR]

Climate change poses huge challenges for public health, and cities are at the forefront of this process. The purpose of this paper is to present the issues climate change poses for public health in the city of Barcelona, how they are being addressed, and what are the current major challenges, trying to contribute to the development of a baseline understanding of the status of adaptation in cities from a public health perspective. The major issues related to climate change faced by the city are common to other urban centers in a Mediterranean climate: heat waves, water availability and quality, air quality, and diseases transmitted by vectors, and all are reviewed in detail with empirical data. They are not a potential threat for the future, but have actually challenged the city services and infrastructure over the last years, requiring sustainable responses and rigorous planning. [ABSTRACT FROM AUTHOR]

In 2017, renewable energy accounted for 19.5% of the total energy used for heating and cooling in the European Union. This paper analyses the technical and economic feasibility of using mine water from flooded underground coal mines in Spain to provide renewable thermal energy to buildings located in surrounding areas. High efficiency heat pump system is proposed to provide sustainable energy for district heating and cooling, leading to a reduction of greenhouse gas emissions to the atmosphere. The results obtained show that 20 MW of thermal energy is available for heat recovery from mine waters, compared to 4 MW of electrical power committed for pumping from inside the mines and heat pump consumption. The economic model that has been developed indicates that the feasibility of the geothermal plants depends on the amount of thermal energy demanded, the efficiency of the system and the distance from the abandoned mines to potential users. A mine water geothermal plant with 10 MW of power provides energy for about 1,700 households at a distance of 2 km with an investment cost of 3.25 M€. Regarding the reduction of CO 2 emissions, the emission factor is reduced to 0.048 kgCO 2 kWh−1 using this approach. • The geothermal potential has been analyzed in three closed mines in NW Spain. • The geothermal use of water from a mine allows heating and cooling nearby buildings. • The feasibility depends on the system efficiency and the distance to buildings. • A geothermal plant with 10 MW of power could provide energy for 1,700 households. • 10 MW geothermal plant reaches an IRR of 12% for a distance to buildings of 2 km. [ABSTRACT FROM AUTHOR]

The trend in energy consumption, with a particular focus on heating and cooling demand, is an issue that is relevant to the promotion of new energy policies and more efficient energy systems. Moreover, heating and cooling energy demand is expected to rise in the next several decades, mainly due to climate change as well as increasing incomes in developing countries. In this context, the building sector is currently a relevant energy-intensive economic sector in Morocco; it accounts for 33% of the country's total energy demand (as the sector with the second highest energy demand, after the transport sector), with the residential sector accounting for 25% and the tertiary sector accounting for 8%. Aiming to reduce energy dependence and promote sustainable development, the Moroccan government recently issued a comprehensive plan to increase the share of renewables and improve energy efficiency. This strategy includes novel thermal building regulations promoted by the Moroccan Agency for Energy Efficiency. This paper analyzes the thermal behavior and heating-cooling energy demand of a residential building located in Tangier (Morocco) as a case example, based on the country's new thermal regulations and considering specific climatological conditions. A comparison with common Moroccan residential buildings as well as with those in nearby countries with similar meteorological conditions but significant differences in terms of energy demand regulation and requirements, such as Spain, is also included. Simulations were carried out using the DesingBuilder and EnergyPlus Software packages. According to the results, the last building thermal regulation requirements in Morocco need to be revised and extended in order to achieve the energy efficiency objectives established by the Moroccan government for 2030. [ABSTRACT FROM AUTHOR]

One of the main challenges for a further integration of renewable energy sources in the electricity grid is the development of large-scale energy storage systems to overcome their intermittency. This paper presents the concept named CHEST (Compressed Heat Energy STorage), in which the excess electricity is employed to increase the temperature of a heat source by means of a high-temperature heat pump. This heat is stored in a combination of latent and sensible heat storage systems. Later, the stored heat is used to drive an organic Rankine cycle, and hereby to produce electricity when needed. A novel application of this storage system is presented by exploring its potential integration in the Spanish technical constraints electricity market. A detailed dynamic model of the proposed CHEST system was developed and applied to a case study of a 26-MW wind power plant in Spain. Different capacities of the storage system were assessed for the case under study. The results show that roundtrip efficiencies above 90% can be achieved in all the simulated scenarios and that the CHEST system can provide from 1% to 20% of the total energy contribution of the power plant, depending on its size. The CHEST concept could be economically feasible if its capital expenditure (CAPEX) ranges between 200 and 650 k€/MW. [ABSTRACT FROM AUTHOR]

The use of lightweight concrete for the construction of single-family houses has become increasingly popular in Spain. In this paper, single-family houses with different shape factors and window-to-wall ratios are analysed from both a thermal and environmental perspective using Passive House Planning Package (PHPP) software to calculate the energy demand. The study has been carried out for different Atlantic microclimates (coastal, inland, and mountain) in northern Spain. What most affects the thermal energy used for air conditioning is the variation of the microclimates, so the study focuses mainly on this aspect. Operational energy for heating has decreased greatly via the use of high degree of insulation and hence the next task is to decrease the total energy consumed taking into account the embodied energy. Impacts on Primary Energy and Global Warming Potential are calculated using a cradle-to-grave approach. The energy use for heating and domestic hot water is analysed for different thicknesses of insulation under three energy supply scenarios: electricity only (for 2018 and with the Spanish decarbonisation plan for 2030); heat pump plus electricity; and natural gas boiler. Even for houses with a good level of insulation, the ratio of operational-to-total impacts varies significantly: from 46% to 87% for primary energy and from 31% to 75% for global warming potential, depending on the shape factor of the house, the microclimate and the heat supply scenario. By applying future environmental policies, electricity can become a more environmentally friendly option than natural gas. [ABSTRACT FROM AUTHOR]

Research Highlights: This paper compares the thermal requirements in three different olive-growing areas in the Mediterranean region (Toledo, central Spain; Lecce, southeastern Italy; Chaal, central Tunisia). A statistical method using a partial least square regression for daily temperatures has been applied to study the chilling and heat requirements over a continuous period. Background and Objectives: The olive is one of the main causes of pollen allergy for the population of Mediterranean cities. The physiological processes of the reproductive cycle that governs pollen emission are associated with temperature, and thermal requirements strongly regulate the different phases of the plant's life cycle. However, the point when several specific processes occur—Such as the phases within the dormancy period—Is unclear, and the transition between endodormancy and ecodormancy is not easily distinguishable from an empirical point of view. This work focuses on defining the thermal accumulation periods related to the temperature balance needed to meet the chilling and heat requirements for the metabolic activation and budbreak in olive trees. Results and Conclusions: Thermal accumulation patterns in olive trees are strongly associated with the bioclimatic conditions of olive-growing areas, and the olive flowering start dates showed significant differences between the three studied stations. Our results show that the chilling requirements were fulfilled between late autumn and early winter, although the chilling accumulation period was more evident in the coldest and most continental bioclimatic areas (central Spain). The heat accumulation period (forcing period) was clearly defined and showed a close relationship with the timing of olive flowering. Heat requirements were therefore used to generate accurate forecasting models to predict the beginning of the olive bloom and subsequent olive pollen emission. A forecasting model considering both the chilling and heat requirements was generated in Toledo, where the estimated days displayed an error of 2.0 ± 1.8 days from the observed dates. For Lecce, the error was 2.7 ± 2.5 days and for Chaal, 4.2 ± 2.4 days. [ABSTRACT FROM AUTHOR]

Energy poverty can be defined as the inability to pay the bills that are required for maintaining the comfort conditions (usually in winter) in dwellings. The use of energy efficient systems is one way forward to mitigate this problem, with one option being the electrically driven air source heat pump water heater. This paper assesses the performance of a centralised heat pump (200 kW of heating capacity) to meet the space heating demand of block dwellings in Madrid (tier four out of five in winter severity in Spain). Two models have been developed to obtain the following variables: the hourly thermal energy demand and the off-design heat pump performance. The proposed heat pump is driven by a motor with variable rotational speed to modulate the heating capacity in an efficient way. A back-up system is also considered to meet the peak demand. A levelised cost of heating of 92.22 €/MWh is obtained for a middle-level energy efficiency in housing (class E, close to D). Moreover, the following energy-environmental parameters have been achieved: more than 74% share of renewable energy in primary energy and 131.7 g CO2 avoided per kWh met. A reduction of 60% in the heating cost per dwelling is obtained if an energy retrofit is carried out, improving the energy performance class from E to C. These results prove that the proposed technology is among the most promising measures for addressing energy poverty in vulnerable households. [ABSTRACT FROM AUTHOR]

Rooftop gardens ona building have proved to be a good way to improve its storm water management, but many other benefits can be obtained from the installation of these systems, such as reduction of energy consumption, decrease of the heat stress, abatement on CO2 emissions, etc. In this paper, the effect from the presence of these rooftop gardens on abuilding's energy consumption has been investigated by experimental campaigns using a green roof ona public building in a Mediterranean location in Spain. The obtained results demonstrate a substantial improvement by the installation of the green roof onthe building's cooling energy demand for a standard summer day, in the order of 30%, and a reduction, about 15%, in the heating energy demand for a winter day. Thus, given the longer duration of the summer conditions along the year, a noticeable reduction on energy demand could be obtained. Simulation analysis, using commercial software TRNSYS code, previously calibrated using experimental data for typical summer and winter days, allows for the extrapolation to the entire year of these results deducing noticeable improvement in energy efficiency, in the order of 19%, but with an increase of 6% in the peak power during the winter period. [ABSTRACT FROM AUTHOR]

Many studies are nowadays focused on the application of energy conservation measures (ECMs) to building sector because of the reductions of both greenhouse gases and energy consumption set by the European Union. Heating, Ventilating and Air Conditioning (HVAC) systems are the main causes of most energy consumption in the existing buildings. One of the methods to reduce energy consumption is the modification of setpoint temperatures adapted to external climate conditions but maintaining acceptable comfort levels. The adaptive comfort model of ASHRAE 55–2017 uses the prevailing mean outdoor temperature, which records temperatures of the previous days weighted by a constant α which depends on weather changes. This paper analyses the possibilities of optimizing building energy saving with setpoint temperatures according to the α-value and the number of previous days considered. A total of 390 simulations were conducted by considering three representative climate zones of Spain. The results showed that the α-values between 0.4 and 0.6 had the lowest energy consumption. The use of a low number of previous days also achieved greater reductions in heating energy consumption, whereas a larger number of days was applied to cooling energy consumption. This study makes progress in using adaptive setpoint temperatures optimally to reduce the energy consumption in the building sector. • Modification of setpoints in 390 simulations to optimize energy consumption. • The α-values between 0.4 and 0.6 had the lowest energy consumption. • The number of previous days varied to optimize heating and cooling consumption. • A saving between 25.73 and 44.89% of the total energy consumption by using adaptive setpoint temperatures. • Better performance of the α-value from ASHRAE 55–2017 than that from EN 15251:2007. [ABSTRACT FROM AUTHOR]

Species' range edges are expanding to both warmer and cooler regions. Yet, no studies directly compared the changes in range‐limiting traits within the same species during both types of range expansions. To increase our mechanistic understanding of range expansions, it is crucial to disentangle the contributions of plastic and genetic changes in these traits. The aim of this study was to test for plastic and evolutionary changes in heat tolerance, life history, and behavior, and compare these during range expansions toward warmer and cooler regions. Using laboratory experiments we reconstructed the thermal performance curves (TPCurves) of larval life history (survival, growth, and development rates) and larval heat tolerance (CTmax) across two recent range expansions from the core populations in southern France toward a warmer (southeastern Spain) and a cooler (northwestern Spain) region in Europe by the damselfly Ischnura elegans. First‐generation larvae from field‐collected mothers were reared across a range of temperatures (16°–28°C) in incubators. The range expansion to the warmer region was associated with the evolution of a greater ability to cope with high temperatures (increased mean and thermal plasticity of CTmax), faster development, and, in part, a faster growth, indicating a higher time constraints caused by a shorter time frame available for larval development associated with a transition to a greater voltinism. Our results thereby support the emerging pattern that plasticity in heat tolerance alone is inadequate to adapt to new thermal regimes. The range expansion to the cooler region was associated with faster growth indicating countergradient variation without a change in CTmax. The evolution of a faster growth rate during both range expansions could be explained by a greater digestive efficiency rather than an increased food intake. Our results highlight that range expansions to warmer and cooler regions can result in similar evolutionary changes in the TPCurves for life history, and no opposite changes in heat tolerance. [ABSTRACT FROM AUTHOR]

During July 2016, the first integrated heat flow, CO2, and 3He emission survey was conducted across 0.5 km2 of the summit cone and crater of Teide volcano, Tenerife, Canary Islands, Spain. The thermal energy released from Teide summit cone by diffuse degassing was 2.2 MW, and the heat flux calculated through Dawson's method was 8.1 MW, difference due to the comparison of purely convective areas as the crater with diffusive areas as the flanks of the volcano. Diffuse CO2 output was 211±20 t d-1, and 3He emission was estimated to be within a range between 0.35 and 0.89 mol y-1. The obtained values of diffuse degassing and heat fluxes are close to others obtained for similar volcanic areas. The calculation of 3He/heat ratio for the first time in this volcanic system supports the presence of an important mantle source for the degassing of Teide volcano. [ABSTRACT FROM AUTHOR]

Spain’s current heat wave prevention plans are activated according to administrative areas. This study analyses the determination of threshold temperatures for triggering prevention-plan activation by reference to isoclimatic areas, and describes the public health benefits. We subdivided the study area – the Madrid Autonomous Region (MAR) – into three, distinct, isoclimatic areas: ‘North’, ‘Central’ and ‘South’, and grouped daily natural-cause mortality (ICD-10: A00-R99) in towns of over 10,000 inhabitants (2000–2009 period) accordingly. Using these three areas rather than the MAR as a whole would have resulted in a possible decrease in mortality of 73 persons (38–108) in the North area, and in aborting unnecessary activation of the plan 153 times in the Central area and 417 times in the South area. Our results indicate that extrapolating this methodology would bring benefits associated with a reduction in attributable mortality and improved effectiveness of public health interventions. [ABSTRACT FROM PUBLISHER]

Background: Cold spells and heatwaves increase mortality. However little is known about the effect of heatwaves or cold spells on cardiovascular morbidity. This study aims to assess the effect of cold spells and heatwaves on cardiovascular diseases in a Mediterranean region (Catalonia, Southern Europe).Methods: We conducted a population-based retrospective study. Data were obtained from the System for the Development of Research in Primary Care and from the Catalan Meteorological Service. The outcome was first emergency hospitalizations due to coronary heart disease, stroke, or heart failure. Exposures were: cold spells; cold spells and 3 or 7 subsequent days; and heatwaves. Incidence rate ratios (IRR) and 95% confidence intervals were calculated using the self-controlled case series method. We accounted for age, time trends, and air pollutants; results were shown by age groups, gender or cardiovascular event type.Results: There were 22,611 cardiovascular hospitalizations in winter and 17,017 in summer between 2006 and 2013. The overall incidence of cardiovascular hospitalizations significantly increased during cold spells (IRR = 1.120; CI 95%: 1.10-1.30) and the effect was even stronger in the 7 days subsequent to the cold spell (IRR = 1.29; CI 95%: 1.22-1.36). Conversely, cardiovascular hospitalizations did not increase during heatwaves, neither in the overall nor in the stratified analysis.Conclusions: Cold spells but not heatwaves, increased the incidence of emergency cardiovascular hospitalizations in Catalonia. The effect of cold spells was greater when including the 7 subsequent days. Such knowledge might be useful to develop strategies to reduce the impact of extreme temperature episodes on human health. [ABSTRACT FROM AUTHOR]

The relationship between heat waves and mortality has been widely described, but there are few studies using long daily data on specific-cause mortality. This study is undertaken in central Spain and analysing natural causes, circulatory and respiratory causes of mortality from 1975 to 2008. Time-series analysis was performed using ARIMA models, including data on specific-cause mortality and maximum and mean daily temperature and mean daily air pressure. The length of heat waves and their chronological number were analysed. Data were stratified in three decadal stages: 1975-1985, 1986-1996 and 1997-2008. Heat-related mortality was triggered by a threshold temperature of 37 °C. For each degree that the daily maximum temperature exceeded 37 °C, the percentage increase in mortality due to circulatory causes was 19.3 % (17.3-21.3) in 1975-1985, 30.3 % (28.3-32.3) in 1986-1996 and 7.3 % (6.2-8.4) in 1997-2008. The increase in respiratory cause ranged from 12.4 % (7.8-17.0) in the first period, to 16.3 % (14.1-18.4) in the second and 13.7 % (11.5-15.9) in the last. Each day of heat-wave duration explained 5.3 % (2.6-8.0) increase in respiratory mortality in the first period and 2.3 % (1.6-3.0) in the last. Decadal scale differences exist for specific-causes mortality induced by extreme heat. The impact on heat-related mortality by natural and circulatory causes increases between the first and the second period and falls significantly in the last. For respiratory causes, the increase is no reduced in the last period. These results are of particular importance for the estimation of future impacts of climate change on health. [ABSTRACT FROM AUTHOR]

District heating (DH) is an important technology in future smart energy systems as it allows for an efficient implementation of various renewable energy sources. As DH develops towards lower temperatures and renewable electricity production increases, new types of heat sources become relevant. Thus, the aim of this article is to assess the potential for utilizing four unconventional excess heat (UEH) sources in DH systems, namely: Data centers, wastewater treatment, metros and service sector buildings. The main method used to assess the UEH potentials is an energy system analysis focusing on the availability and economic feasibility of utilizing the UEH sources in national contexts. The analysis consists of 2015 and 2050 scenarios for Germany, Spain and France. The results show a potential for utilizing the UEH potentials in all three countries, both in 2015 and 2050 systems. The potentials are highest in the 2050 scenarios, primarily due to larger DH shares. Furthermore, the potentials are limited by competition with other heat supply sources, conjunction with heat demands and feasible heat pump operation. In conclusion, the four UEH sources could impact the local DH systems, but in a national energy system context they are expected to play a minor role. [ABSTRACT FROM AUTHOR]

Off-gas is one of the by-products of the steelmaking process. Its potential energy can be transformed into heat and electricity by means of cogeneration. A case study using a coke oven and Linz–Donawitz converter gas is presented. This work addresses the gas allocation problem for a cogeneration system producing steam and electricity. In the studied facility, located in northern Spain, the annual production of the plant requires 95,000 MWh of electrical energy and 525,000 MWh of thermal energy. The installed electrical and thermal power is 20.4 MW and 81 MW, respectively. A mixed integer linear programming model is built to optimize gas allocation, thus maximizing its benefits. This model is applied to a 24-h scenario with real data from the plant, where gas allocation decision-making was performed by the plant operators. Application of the model generated profit in a scenario where there were losses, increasing benefits by 16.9%. A sensitivity analysis is also performed. The proposed model is useful not only from the perspective of daily plant operation but also as a tool to simulate different design scenarios, such as the capacity of gasholders. [ABSTRACT FROM AUTHOR]

Solar thermal plants are often considered as a convenient and environmentally friendly way to supply heat to buildings or low temperature industrial processes. Some modelling techniques are required to assess the dynamic behaviour of solar thermal plants in order to control them correctly. This aspect is reinforced while large plants are considered. Indeed, some atmospheric conditions, such as local clouds, could have significant influence on the outlet temperature of the solar field. A common modelling approach to assess the heat transport in pipes is the one-dimensional finite volume method. However, previous work shows limitations in the assessment of the temperatures and in the computational time required for simulating large pipe networks. In this contribution, a previous alternative method developed and validated in a district heating network is used and extended to a solar thermal plant considering the thermal solar gain and the inertia of the pipes. The present contribution intends to experimentally validate this model on an existing solar plant facility available at the Plataforma Solar de Almeria in Spain. [ABSTRACT FROM AUTHOR]

Heat waves pose additional risks to urban spaces because of the additional heat provided by urban heat islands (UHIs) as well as poorer air quality. Our study focuses on the analysis of UHIs, human thermal comfort, and air quality for the city of Madrid, Spain during heat waves. Heat wave periods are defined using the long-term records from the urban station Madrid-Retiro. Two types of UHI were studied: the canopy layer UHI (CLUHI) was evaluated using air temperature time-series from five meteorological stations; the surface UHI (SUHI) was derived from land surface temperature (LST) images from MODIS (Moderate Resolution Imaging Spectroradiometer) products. To assess human thermal comfort, the Physiological Equivalent Temperature (PET) index was applied. Air quality was analyzed from the records of two air quality networks. More frequent and longer heat waves have been observed since 1980; the nocturnal CLUHI and both the diurnal and nocturnal SUHI experience an intensification, which have led to an increasing number of tropical nights. Conversely, thermal stress is extreme by day in the city due to the lack of cooling by winds. Finally, air quality during heat waves deteriorates because of the higher than normal amount of particles arriving from Northern Africa. [ABSTRACT FROM AUTHOR]