Search

This article presents an efficient analysis method for a novel continuous transverse stub (CTS) antenna. As opposed to state-of-the-art CTS antenna designs, the proposed architecture achieves circular polarization using a single CTS array and without any polarization converter. The structure consists of long radiating slots/stubs fed by over-moded parallel-plate waveguides. More precisely, the transverse electromagnetic (TEM) mode and the first transverse electric (TE1) mode of the feeding waveguides are used to generate a circularly polarized field. The array is analyzed using a spectral mode-matching method. First, the active reflection coefficient of the infinite array is derived in closed form. A windowing approach is then adopted to compute the radiation patterns of finite-size arrays. Numerical results obtained with this method are in excellent agreement with full-wave simulations, carried out with a commercial software. The performance of this class of CTS antennas has been investigated using the developed model. It is theoretically demonstrated that the proposed array can be designed to attain an axial ratio (AR) lower than 3 dB over a 52.9% relative bandwidth at broadside. Furthermore, the active input reflection coefficient is lower than −10 dB over a 40.8% relative bandwidth, when the array steers its main beam at $\theta _{0}=45^\circ $. This solution is an attractive candidate for next generation satellite communication terminals. [ABSTRACT FROM AUTHOR]

This paper presents the spectral Green’s function (GF) to analyze Fabry–Perot antennas to generate circular polarization (CP). The structure consists of a single cavity created between a partially reflective surface and a high impedance surface, fed by a low directive, linearly polarized source. Elements in the antenna are characterized by tensor impedances. It allows conceiving a circularly polarized antenna supporting a single hybrid leaky-wave mode. Residue analysis is used to demonstrate that a single hybrid leaky-wave mode is sufficient to generate CP. The tool is validated by an antenna design matched over a relative bandwidth of 28.5% with an axial ratio lower than 3 dB. [ABSTRACT FROM AUTHOR]

This paper deals with the design of scalar metasurface antennas capable of radiating a well-polarized beam in the far-field or near-field zones. The equivalent electric current over the metasurface is used to derive design equations to generate the desired field pattern based on the scalar impedance condition. In particular, it is shown that scalar metasurfaces can be used to generate linear and circular polarizations for a fixed pointing direction in the far field by properly changing locally the scalar impedance boundary condition. In addition, they can also be used to generate normal polarized Bessel beams in the near-field region. Several solutions are presented at 20 GHz, with different polarizations and feeders developed in the framework of a two-year research project financed by the French space agency (Centre National d’Etudes Spatiales). Measurements and full-wave results validate the proposed approach. [ABSTRACT FROM PUBLISHER]

We present a Bessel-beam launcher based on a leaky radial waveguide consisting of a capacitive sheet over a ground plane that supports higher-order leaky modes. A propagating Bessel beam is generated above the radiating waveguide. The Bessel beam is transverse-magnetic (TM) polarized with a vertical component of electric field that is a zeroth-order Bessel function of the first kind. A higher-order leaky-wave mode is used to reduce losses at millimeter waves and, at the same time, avoid the thin dielectric layers used in previously proposed lower order leaky-wave Bessel launchers. Closed-form design equations are provided for the proposed structure. In addition, the operating bandwidth of the launcher is defined using dispersion analysis. Near-field measurements of a prototype operating in the frequency range 38–39.5 GHz validate the concept. The measured launcher generates a Bessel beam with a stable spot size of about 4.3 mm ($0.57\,\lambda$) over a nondiffractive range of about 16.4 mm ($2.2\,\lambda$), within about a 4% fractional bandwidth. [ABSTRACT FROM PUBLISHER]

We describe here an optimization procedure to shape the radiation pattern of planar two-dimensional (2-D) leaky-wave antennas. The structures under investigation are superstrate configurations made by partially reflecting screens (impedances sheets) over a ground plane and excited by open-ended waveguides. The antenna configuration providing the required radiation pattern is obtained by resorting to an ad hoc optimization procedure that minimizes the mean squared error between the target pattern and the actual radiated far field. The radiated field is analytically evaluated using a Green’s function spectral approach to speed up the optimization process. Several kinds of radiation patterns can be obtained using the proposed algorithm. In this work, we focus our attention on flat-topped radiation patterns, suitable as element pattern for phased array antennas covering a limited angular field of view such as those considered for space applications. The proposed procedure is validated by full-wave results and measurements. [ABSTRACT FROM PUBLISHER]

This paper presents a flat, high gain, wide scanning, broadband continuous transverse stub (CTS) array. The design procedure, the fabrication, and an exhaustive antenna characterization are described in details. The array comprises 16 radiating slots and is fed by a corporate-feed network in hollow parallel plate waveguide (PPW) technology. A pillbox-based linear source illuminates the corporate network and allows for beam steering. The antenna is designed by using an ad hoc mode matching code recently developed for CTS arrays, providing design guidelines. The assembly technique ensures the electrical contact among the various stages of the network without using any electromagnetic choke and any bonding process. The main beam of the antenna is mechanically steered over $\pm 40^\circ$ in elevation, by moving a compact horn within the focal plane of the pillbox feeding system. Excellent performances are achieved. The features of the beam are stable within the design 27.5–31 GHz band and beyond, in the entire Ka-band (26.5–40 GHz). An antenna gain of about 29 dBi is measured at broadside at 29.25 GHz and scan losses lower than 2 dB are reported at $\pm 40^\circ$. The antenna efficiency exceeds 80% in the whole scan range. The very good agreement between measurements and simulations validates the design procedure. The proposed design is suitable for Satcom Ka-band terminals in moving platforms, e.g., trains and planes, and also for mobile ground stations, as a multibeam sectorial antenna. [ABSTRACT FROM PUBLISHER]

This paper introduces a rigorous and effective modeling framework for the continuous transverse stub (CTS) array, based on a spectral Green’s function approach. A multimodal expansion of the equivalent currents over the slots is used to derive an accurate expression for the active impedance of an infinite array. This formula is validated through comparisons with full-wave simulations when the array scans are in principal planes. The mathematical formulation highlights the broadband properties of CTS arrays and accurately predicts the impact of the geometrical parameters on the active impedance, as a function of frequency and scan angle. The discussion of the results provides physical insights to outline effective design strategies. [ABSTRACT FROM PUBLISHER]