Search

The 2-degree-of-freedom direct drive induction motor (2DoFDDIM) is capable of implementing rotary linear or helical motion, which has the definite advantages of integrated structure, high material utilization, and so on. In this paper, the characteristics analysis of the three kinds of motions is presented. The air-gap magnetic field distributions and mechanical characteristics of the 2DoFDDIM with three motions are derived respectively. The results show that there is super synchronous speed or velocity phenomenon for rotary or linear motion. Moreover, the coupling effects between the rotating and travelling wave magnetic fields and that between the two mechanical motions will deteriorate the performance of the three-dimensional (3-D) helical motion compared with the two-dimensional (2-D) motion (rotary or linear). The expressions of the resistant torque and force caused by the coupling effect are derived, which are verified by 3-D finite-element models (FEMs). The results regarding the weakening of the output torque of helical motion and interacting magnetic field obtained from FEMs are then verified by experimental tests. Finally, the skewed slot method is applied to 2DoFDDIM, which successfully improves the performance of helical motion aiming to compensate the coupling resistant torque and force. [ABSTRACT FROM AUTHOR]

The special structure of the two‐degrees‐of‐freedom direct drive induction motor (2DoFDDIM) gives rise to the magnetic‐coupling between the rotary and linear magnetic fields. In this article, the dynamic magnetic‐coupling effect, which is against the static coupling effect and indicates the special phenomenon caused by coupling magnetic fields in helical motion, is exposed and investigated based on the 3D finite‐element model (3D FEM). The control variable method is adopted and only the coupling magnetic field in helical motion is considered in this research. The performance changes caused by the dynamic magnetic‐coupling effect of the motor are simulated and analyzed. The relationship between the coupling magnetic field and the dynamic magnetic‐coupling effect is disclosed. To validate the 3D FEM and the magnetic‐coupling effect of 2DoFDDIM, a prototype and an experimental platform were built and measured. For the induced voltages caused by the magnetic‐coupling effect, the finite element analysis results are in agreement with the experimental results. © 2019 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. [ABSTRACT FROM AUTHOR]

In this work, a novel solid rotor induction motor with toroidal winding (N-TWSRIM) is proposed and its structure and main structural parameters are given. The operating principle is analyzed in accordance with the movement of the armature magnetic field at different times. An equivalent circuit model (ECM) of the N-TWSRIM is established based on composite multilayer theory to analyze and calculate motor performance quickly and accurately. Electromagnetic performance, which includes output torque, stator current, and power factor under different slip, is calculated with ECM, and its results are compared with those of the finite element method. A prototype of the N-TWSRIM is built and experimented on to validate the correctness of the operating principle and ECM. Experimental results on stator current and torque are consistent with the finite element and analytical results. [ABSTRACT FROM AUTHOR]

This study presents a composite multilayer method (CMM) to evaluate the performance of a two‐degree‐of‐freedom (2DoF) direct drive induction motor (2DoFDDIM) whose solid rotor is coated with a copper layer. It includes a rotary part and a linear part. Based on the traditional multilayer theory, a complete 2DoFDDIM CMM computer program importing propagation constants is built. Due to the complex magnetic field in a 2DoFDDIM, this study mainly analyses it from the perspective of a single DOF motor. An equivalent circuit for the rotary part of the 2DoFDDIM is then derived applying CMM and the 2D magnetic field distribution is obtained by solving Maxwell's equations in motor layers. The developed torques, power factors and stator currents of the rotary part with different slips and the latter two of the linear part at zero speed are calculated by CMM, which are then compared with results from the finite element method (FEM) and experimental results. The computation time of the CMM is far less than that of the FEM. The acceptable accuracy confirms the effectiveness of the CMM for analysis and performance calculations of the 2DoFDDIM. [ABSTRACT FROM AUTHOR]

A two-degree-of-freedom direct-drive induction motor (2DoFDDIM), whose solid rotor is coated with a copper layer, is capable of linear, rotary, and helical motions and has widespread applications. For solid-rotor motors, the calculation and analysis of rotor total eddy current loss (TECL) are crucial in studying the factors causing such a loss and possible loss reduction methods. In this study, a new nonlinear analytical method considering the saturation of the rotor core is proposed to solve the fundamental magnetic field. The new method divides the time period into segments. The magnetic field distribution at any time is obtained using Maxwell equations. The eddy current losses in the copper layer and rotor core caused by the fundamental magnetic field are calculated. The surface eddy current losses in the copper layer and rotor core caused by harmonics are calculated using a 2D analytical method. TECL is determined by the sum of eddy current and surface eddy current losses. Coefficients are utilized to consider eddy, saturation, and end-region effects when calculating the rotor core TECL. The new method is verified using 3D FEM, and the results show the proposed method has higher accuracy than the original method. The errors of the rotor core and copper layer TECLs are less than 6 % and 7.3 % , respectively. [ABSTRACT FROM AUTHOR]