Search

Methanogenesis and iron reduction play major roles in determining global fluxes of greenhouse gases. Despite their importance, environmental factors that influence their interactions are poorly known. Here, we present evidence that pH significantly influences the balance between each reaction in anoxic environments that contain ferric (oxyhydr)oxide minerals. In sediment bioreactors that contained goethite as a source of ferric iron, both iron reduction and methanogenesis occurred but the balance between them varied significantly with pH. Compared to bioreactors receiving acidic media (pH 6), electron donor oxidation was 85% lower for iron reduction and 61% higher for methanogenesis in bioreactors receiving alkaline media (pH 7.5). Thus, methanogenesis displaced iron reduction considerably at alkaline pH. Geochemistry data collected from U.S. aquifers demonstrate that a similar pattern also exists on a broad spatial scale in natural settings. In contrast, in bioreactors that were not augmented with goethite, clay minerals served as the source of ferric iron and the balance between each reaction did not vary significantly with pH. We therefore conclude that pH can regulate the relative contributions of microbial iron reduction and methanogenesis to carbon fluxes from terrestrial environments. We further propose that the availability of ferric (oxyhydr)oxide minerals influences the extent to which the balance between each reaction is sensitive to pH. The results of this study advance our understanding of environmental controls on microbial methane generation and provide a basis for using pH and the occurrence of ferric minerals to refine predictions of greenhouse gas fluxes., (© 2018 John Wiley & Sons Ltd.)

A methane production system with continuous stirred-tank reactor, rumen liquid as inoculate microorganisms, and paper mill excess sludge (PES) as feedstock was studied. The work mainly focused on revealing the effect of feedstock concentration on the biogas production, which was seldom reported previously for the current system. The optimal fermentation conditions were found as follows: pH = 7, T = 39 ± 1 °C, sludge retention time is 20 days, sludge with total solids (TS) are 1, 2, 3.5, 5, 10, and 13% in weight. Daily gas yields were measured, and biogas compositions were analyzed by gas chromatograph. Under such conditions, the optimum input TS was 10 wt%, and the biogas yield and volume gas productivity were 280.2 mL/g·TS and 1188.4 mL L -1 ·d -1 , respectively. The proportions of CH 4 and CO 2 in the biogas were 65.1 and 34.2%. The CH 4 yield reached 182.7 mL/g VS (volatile suspended solid), which was higher than previously reported values. The findings of this work have a significant effect on promoting the application of digesting PES by rumen microorganisms and further identified the technical parameter.

Fines concentration harms paper machine runability and output quality in recovered paper processing, hence, their extraction would be fundamentally beneficial. In this study, separated fines from an industrial recycled fiber pulp (RFP) were characterized and evaluated for their potential biogas yields with a focus on understanding the role of varying lignin and ash contents. Further, these results were compared with biogas yields from conventional chemical and mechanical pulps. Overall, methane yields of fines from mechanical pulps (21-28mL/gVS) and RFP (127mL/gVS) are relatively low compared to the high methane yields of 375mL/gVS from the chemical pulp fines. However, it was shown that the high ash content in RFP fines (up to 50%) did not negatively influence overall yield, rather, it was the presence of slowly biodegrading lignin-rich fiber fines., (Copyright © 2015 Elsevier Ltd. All rights reserved.)