Search

Cerium (Ce 4+ ) and cerium oxide nanoparticles (CeO 2 -NPs) have diversified reported effects on plants. Once dispersed in the environment their fate is not well understood, especially in co-existence with other pollutants like cadmium (Cd). The effect of co-application of Ce and Cd are reported in various studies, but the role of Ce source (ionic or bulk) and nanoparticle size is still unknown in cereal plants like maize (Zea mays). To better understand the synergistic effects of Ce and Cd, 500 mg kg -1 Ce coming from ionic (Ce 4+ as CeSO 4 ) and CeO 2 nano sources (10 nm, 50 nm, and 100 nm) alone and in combination with 0.5 mg Cd kg -1 sand were applied to maize seedlings. Growth, physiology, root structure, anatomy, and ionic homeostasis in maize were measured. The results revealed that Ce 4+ resulted in overall decrease in seedling growth, biomass and resulted in higher heavy metal (in control sets) and Cd (in Cd spiked sets) uptake in maize seedlings' root and shoot. The effects of CeO 2 -NPs were found to be dependent on particle size; in fact, under Cd-0 (non-Cd spiked sets) CeO 2 -100 nm showed beneficial effects compared to the control. While under co-application with Cd, CeO 2 -50 nm showed net beneficial effects on maize seedling growth parameters. The Ce alone, and in combination with Cd, altered the root suberin barrier formation. Both ionic and nano Ce sources alone and in co-existence with Cd behaved differently for tissue elemental concentrations (Ce, Cd, micronutrients like B, Mn, Ni, Cu, Zn, Mo, Fe and elements Co, Si) suggesting a strong influence of Cd-Ce coexistence on the element's uptake and translocation in maize., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Lorenzo Rossi reports financial support was provided by National Institute of Food and Agriculture. Muhammad Ashar Ayub reports financial support was provided by Higher Education Commission Pakistan. Cyren Rico reports financial support was provided by National Science Foundation., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Alternative approaches and/or modified approaches to tackle resistance in gut microbes are need of the hour. The current study was planned to find the resistance modulation and toxicity potential of sodium alginate stabilized MgO nanoparticles and antibiotics against Escherichia coli ( E. coli ) isolated from the gut of Houbara bustard bird ( n = 105 fecal samples). The preparations consisted of gel stabilized ampicillin (G+A), gel stabilized MgO and ampicillin (G+M+A), gel stabilized MgO and cefoxitin (G+M+C), gel stabilized tylosin (G+T), gel stabilized MgO and tylosin (G+M+T), and gel stabilized MgO (M+G). The fecal samples showed 53% (56/105) prevalence of E. coli which was found to be significantly ( p < 0.05) associated with most of the assumed factors and resistant to multiple drugs. G+M+T showed the lowest (4.883 ± 0.00 μ g/mL) minimum inhibitory concentration (MIC) followed G+M+C, G+M+A, G+A, M+G, and G+T. Significant reduction ( p < 0.05) in MIC with respect to incubation interval found at the 16 th hr for G+M+A, G+A, and G+M+C that further remained nonsignificant ( p > 0.05) onwards until the 24 th hr of incubation. In the case of G+T and M+G, significant reduction in MIC was found at the 20 th hr and 24 th hr of incubation. Ecotoxicology and histopathology trials on snails showed mild changes in MICs of the preparations. The study thus concluded increasing drug resistance in E . coli of houbara bird while sodium alginate stabilized MgO nanoparticles and antibiotics were effective alternative antibacterial composites with mild toxicity., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2022 Afshan Muneer et al.)

Amongst the various types of cancer, breast cancer is a highly heterogeneous disease and known as the leading cause of death among women globally. The extensive interdisciplinary investigation in nanotechnology and cancer biomedical research has been evolved over the years for its effective treatment. However, the advent of chemotherapeutic resistance in breast cancer is one of the major confront researchers are facing in achieving successful chemotherapy. Research in the area of cancer nanotechnology over the years have now been revolutionized through the development of smart polymers, lipids, inorganic materials and eventually their surface-engineering with targeting ligands. Moreover, nanotechnology further extended and brings in the notice the new theranostic approach which combining the therapy and imaging simultaneously. Currently, research is being envisaged in the area of novel nano-pharmaceutical design viz. liposome, nanotubes, polymer lipid hybrid system, which focuses to make the chemotherapy curative and long-lasting. In this review, we aimed to discuss the recent advancement of different surface-engineered/targeted nanomedicines that improved the drug efficacy in breast cancer., (Copyright © 2019. Published by Elsevier Ltd.)

Zinc oxide nanoparticles (NPs) have emerged as a novel elicitor for enhanced biosynthesis of secondary metabolites in in vitro plant cell cultures. The current study was aimed to explore elicitation abilities of ZnO-NPs for enhanced accumulation of lignans and neolignans in cell cultures of Linum usitatissimum . We optimized concentration of zinc oxide NPs before carrying out a full-fledged experiment. Subsequently, an optimum dose of 100 mg/l was introduced into the culture medium on day 0, days 0 and 15, and finally days 0 and 25. We observed that repeated elicitation stimulated various parameters and physiological responses in Linum usitatissimum cell cultures than one-time elicitation. Repeated elicitation of cell cultures on day 0 and 15 resulted in highest fresh weight (412.16 g/l) and lignans production (secoisolariciresinol diglucoside 284.12 mg/l: lariciresinol diglucoside 86.97 mg/l). Contrarily, repeated elicitation on day 0 and 25 resulted in highest DW (13.53 g/l), total phenolic production (537.44 mg/l), total flavonoid production (123.83 mg/l) and neolignans production (dehydrodiconiferyl alcohol glucoside 493.28 mg/l: guaiacylglycerol-β-coniferyl alcohol ether glucoside 307.69 mg/l). Enhancement in plant growth and secondary metabolites accumulation was several fold higher than controls. Furthermore, a linear relationship existed between total phenolic and flavonoid contents which in turn was correlated with higher antioxidant activities.

One of the most significant biotic constraints that wheat production faces is weed infestation. Wheat is infested with different weeds that cause yield losses (up to 100%) that vary based on the type of weed, their density, and the environmental conditions. Chemical weed control is the most common method to control weeds in wheat. However, widespread herbicide resistance (>365 cases worldwide) has challenged the sustainability of this method. Use of nanoherbicides is a promising strategy to cope with the issue of herbicide resistance. To achieve weed control conditions during the whole growing season, nanoformulations of herbicides are a delivery strategy that involves covering an active component with various materials that vary in size from nano to nanoscale and then releasing the substance in a controlled manner. Nanoherbicides prevent leaching and volatilization of active components and premature degradation through photolysis, hydrolysis, and biodegradation. According to studies, nanoencapsulation of herbicides produces more targeted and less hazardous agricultural formulations. Using nanoherbicides in lower concentrations is beneficial. It lessens the long-term impacts of herbicide residues in wheat fields and the toxicity of these herbicides to the environment. It is also beneficial in eliminating the weeds without ever interacting with the crop plants, which eventually results in a greater wheat yield. This review provides a comprehensive overview of the emerging field of utilizing nanoparticles (NPs) in herbicides for effective weed management in wheat crops. This article explores the novel approach of integrating NPs with herbicidal agents, highlighting their potential benefits and challenges. The review also addresses the current state of research, recent advancements, and potential future directions in this evolving area of agricultural science.

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

The synergistic effect of bimetallic co‐incorporated metal oxides have gained enormous attention due to their unique optoelectronic properties. Herein, we present the green synthesis of ZnO, Cu‐incorporated ZnO, Mn‐incorporated ZnO, and Cu‐Mn co‐incorporated nanoparticles (ZnO NPs, CuZnO NPs, MnZnO NPs, MnCuZnO NPs) for antimicrobial and photocatalytic reduction applications using corn silk extract and industrial metal wastes. The as‐synthesized NPs were characterized by using UV‐visible absorption spectroscopy (UV‐Vis), photoluminescence (PL) spectroscopy, Fourier‐transformed infrared spectroscopy (FT‐IR), powdered x‐ray diffraction (XRD), and scanning electron microscopy (SEM). CuZnO, MnZnO, and MnCuZnO NPs efficiently inhibited bacterial culture growth. The photocatalytic reduction activity of as‐synthesized NPs against the different concentrations of 4‐nitrophenol (4‐NP) in water was also investigated. CuZnO and MnCuZnO nanoparticles were to be efficient photocatalysts for reducing 4‐NP into 4‐aminophenol (4‐AP). Research Highlights: Green synthesis of nanomaterials by agricultural and industrial wastesCu and Mn co‐incorporated ZnO NPs have shown good photocatalysis and antimicrobial activitiesGreen approach for waste conversion to value‐added products [ABSTRACT FROM AUTHOR]

The major goal of this study was to fabricate ZnO nanoparticles (NPs) via chemical and biological routes to evaluate and compare their physiochemical behavior (size and morphology) and biological potentials. The synthesized NPs were confirmed via various spectroscopy and imagining techniques such as XRD, FT-IR, HPLC and SEM. The characterized NPs were then assessed for various in vitro biological applications. Furthermore, apoptotic potential was investigated using HepG2 cell lines by evaluating various signature markers of apoptosis including mitochondrial membrane potential, reactive oxygen/nitrogen (ROS/RNS) production, peroxidases and pro-apoptotic caspase 3 activation. Crystalline, hexagonal structured NPs with an average crystalline size distribution of 32 nm and 23 nm was obtained. Both green-mediated zinc oxide nanoparticles (G-ZnO NPs) and chemically derived NPs (C-ZnO NPs) exhibited high antioxidant, moderate enzyme inhibition, antibacterial and cytotoxicity potential. However, G-ZnO NPs exhibited excellent DPPH (80.1% ± 1.3%), TPC (97 ± 1.22 µgAAE/mg), TRP (94.5 ± 1.48 µgAAE/mg), lipase inhibition (82%), urease inhibition (81.3%), and α-amylase inhibition (18.9%) activity as compared to C-ZnO NPs. Both G-ZnO NPs and C-ZnO NPs showed good antimicrobial potential, however, effect of G-ZnO NPs was more potent than counter C-ZnO NPs. Results from apoptotic assays revealed that G-ZnO NPs showed excellent apoptotic potential in contrast to C-ZnO NPs. Overall results suggested that green route-mediated ZnO NPs exhibits excellent biological potential and could be used for future biomedical applications especially in antimicrobial and cancer therapeutics. To the best of our knowledge, this is the first ever study on Boerhavia diffusa linn-mediated biosynthesis of ZnO nanoparticles and evaluation of their biological activities. [ABSTRACT FROM AUTHOR]

Current research into the role of engineered nanoparticles in drug delivery systems (DDSs) for medical purposes has developed numerous fascinating nanocarriers. This paper reviews the various conventionally used and current used carriage system to deliver drugs. Due to numerous drawbacks of conventional DDSs, nanocarriers have gained immense interest. Nanocarriers like polymeric nanoparticles, mesoporous nanoparticles, nanomaterials, carbon nanotubes, dendrimers, liposomes, metallic nanoparticles, nanomedicine, and engineered nanomaterials are used as carriage systems for targeted delivery at specific sites of affected areas in the body. Nanomedicine has rapidly grown to treat certain diseases like brain cancer, lung cancer, breast cancer, cardiovascular diseases, and many others. These nanomedicines can improve drug bioavailability and drug absorption time, reduce release time, eliminate drug aggregation, and enhance drug solubility in the blood. Nanomedicine has introduced a new era for drug carriage by refining the therapeutic directories of the energetic pharmaceutical elements engineered within nanoparticles. In this context, the vital information on engineered nanoparticles was reviewed and conferred towards the role in drug carriage systems to treat many ailments. All these nanocarriers were tested in vitro and in vivo. In the coming years, nanomedicines can improve human health more effectively by adding more advanced techniques into the drug delivery system. [ABSTRACT FROM AUTHOR]

The excessive use and inappropriate application of synthetic pesticides on essential agricultural crops, intended to them from harmful pests, have resulted in severe environmental pollution. Additionally, the penetration of these toxic pesticide residues into the edible parts of plants has raised significant health concerns for humans and animals by developing respiratory problems, neurological disorders, and cancers. In response, nanotechnology has emerged as a promising alternative, enabling the development of highly reliable, minuscule nanoparticles (NPs) in size of 1–100 nm (nm) with diverse morphologies. These NPs offer an alternative approach to managing plant pathogens compared to traditional pesticides. Although various synthetic NPs have been produced using different elements, their persistence in plant tissues, soil, and water presents significant challenges. Conversely, the synthesis of biologically-derived green NPs, particularly those from bacteria, is considered a safer method for controlling plant pathogens. Bacteria-based green NPs are advantageous due to the rapid growth proliferation of bacteria and their resilience to extreme conditions. However, their synthesis and application remain limited, with scant research exploring against infectious plant pathogens. This study reviews recent literature on the synthesis of bacteria-based NPs, detailing their morphological, structural, chemical, optical, electronic, electrical, and magnetic properties, along with their thermal characteristics. By elucidating the mechanisms by which these NPs combat phytopathogens, this research provide crucial insight for future applications, enhancing our understanding of bacteria-based NPs research. The wealth of recent research on bacteria-based green NPs is anticipated to enrich future applications and deepen our understanding of this emerging field. [Display omitted] • Bacterial-based NPs can diminish harmful chemical usage in agriculture, stimulating a safer environment. • These NPs are highly stable, biocompatibil and bioactive ideal for combating plant pathogens. • Bacterial-based NPs offer sustainable solution, revolutioning the fight against plant pathogens. [ABSTRACT FROM AUTHOR]

This study is aimed at the chemical synthesis of light-activated cobalt-doped zinc oxide and its further doping on reduced graphene oxide (RGO) and assessment of its antibacterial activity on antibiotic-resistant waterborne pathogens including Enterococcus faecalis, Staphylococcus aureus, Klebsiella pneumonia, and Pseudomonas aeruginosa. The synthesized nanoparticles were characterized via UV–vis spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The minimal inhibitory concentration (MIC) of nanoparticles portrayed a significant killing of both Gram-positive and Gram-negative bacteria. The synthesized nanoparticles were further found as active killers of bacteria in drinking water. Further, these nanoparticles were found photothermally active alongside ROS generators. The photokilling activity makes them ideal replacement candidates for traditional water filters. [ABSTRACT FROM AUTHOR]

Apigenin (AGN) is a potent phytochemical with strong antioxidant and anticancer potential. But its therapeutic efficacy is limited due to its high lipophilic characteristics. Therefore, the present investigation aimed to develop AGN-loaded polymer-lipid hybrid nanoparticles (AGN-PLHNPs). Herein, we successfully developed AGN-PLHNPs and optimized them by a 33-Box-Behnken de-sign. The poly (lactic-co-glycolic acid) (PLGA; coded as F1), phospholipon 90 G (PL-90G; coded as F2), and poloxamer 188 (P-188; coded as F3) were considered as the independent factors while particle size (PS; coded as R1), entrapment efficiency (%EE; R2), and cumulative drug release (%CDR; R3) were selected as dependent responses. The average PS, %EE, and %CDR of the AGN-PLHNPs were observed in the range of 101.93 nm to 175.26 nm, 58.35% to 81.14%, and 71.21% to 93.31%, respectively. The optimized AGN-PLHNPs revealed better homogeneity (poly-dispersity index < 0.2) and colloidal stability with high zeta potential (>25 mV). It also exhibited fast release in the initial 4 h after that sustained release up to 48 h of study. Moreover, the results of both DPPH as well as ABTS assays revealed significant improvement in the antioxidant activity. Furthermore, the optimized AGN-PLHNPs exhibited enhanced cytotoxicity efficacy against MCF-7 as well as MDA-MB-231 breast cancer cell lines. [ABSTRACT FROM AUTHOR]

In this study, pure ZnO and iron (Fe) and cobalt (Co) co-doped ZnO nanoparticles were synthesized by varying Fe and Co concentrations using the co-precipitation method. The physical properties of as-prepared samples were investigated through XRD, FTIR, SEM, and UV–vis spectroscopy. X-ray diffraction confirmed the strong influence of Fe and Co ions on structural parameters without disturbing the basic ZnO hexagonal structure. The microstructural study was executed by using the Scherrer, W–H, and SSP methods. FTIR confirmed the presence of Zn–O, and Zn–M–O (M = Fe, Co) vibrational modes, which further confirmed the successful incorporation of dopants ions. The energy bandgap (E g) extracted from UV–vis spectra has shown red-shift (3.37–2.7 eV) for decreasing Fe contents, whereas blue-shift (3.37–3.39 eV) for increasing Co concentration. SEM was used to investigate surface morphology, which represents the high rate of agglomeration. The photocatalytic test was performed on grown samples against various dyes and also observed the effects of varying concentrations of Fe and Co ions. The maximum degradation efficiency (98.8%) at 6%Fe and 4%Co under direct sunlight in 60 min against methylene blue (MB) was achieved. The photocatalytic activity of optimized concentration (6%Fe and 4%Co) was further tested against cresol red (CR), methyl orange (MO), safranin-O (SO), rhodamine-B (RhB), and methyl red (MR) dyes. The maximum degradation efficiency against MR dye (96.0%) was observed. The antibacterial test against Staphylococcus aureus and Klebsiella pneumoniae bacterial strains have shown that co-doped ZnO nanoparticles have a higher activity as compared to pristine ZnO, and furthermore, the sample with 6%Fe and 4%Co concentration exposed the highest antibacterial actively for both bacterial strains. [ABSTRACT FROM AUTHOR]

Plant-based materials are reported to have a wide range of applications in the environmental and biomedical sectors. In this report, we present an economic and environmentally friendly supported turmeric powder (TP) biomass for the support of Ag, Ni and Cu nanoparticles (NPs) designated as Ag@TP, Ni@TP and Cu@TP. The in situ syntheses of the stated NPs were achieved in aqueous medium using NaBH4 as a reducing agent. The prepared NPs were applied for the degradation of o-nitrophenol (ONP), m-nitrophenol (MNP), p-nitrophenol (PNP), methyl orange (MO), Congo red (CR), rhodamine B (RB) and methylene blue (MB). Initially, Ag@TP, Ni@TP and Cu@TP were screened for the MO dye and antibacterial activity, where Ag@TP displayed the strongest catalytic activity for MO and bactericidal activities as compared to Ni@TP and Cu@TP. The quantity of metal ions adsorbed onto the TP was investigated by atomic absorption spectroscopy. The Ag@TP, Ni@TP and Cu@TP were characterized through X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDS) and field emission scanning electron microscope (FESEM) analysis. [ABSTRACT FROM AUTHOR]

Nanotechnology is a new star in the science horizon with many valuable applications and promises to offer. It includes the synthesis and utilization of nanostructure materials ranging from 1 to 100 nm. Mostly these materials are generally (or "could be") produced via the laborious and hazard-prone physical and chemical methods but the green synthesis approaches easier, safe and scalable have been recently developed. Among other metal oxides nanoparticles, Titanium oxide (TiO2) nanoparticles have been mostly exploited for their photocatalytic, antimicrobial and antiparasitic applications. A diverse set of biological entities are used to reduce the precursor metal salt into respective nanoparticles. The secondary metabolites present in organisms such as plants or microbes are involved in the bio-reduction and capping processes. This article will provide an overview of the green synthesis of TiO2 NPs from different biological extracts such as plants, microbes and biological products as well as their potential applications. [ABSTRACT FROM AUTHOR]

The current study emphasizes the synthesis of iron oxide nanoparticles (IONPs) and impact of hydrophilic polymer polyvinyl alcohol (PVA) coating concentration as well as anticancer drug doxorubicin (DOX) loading on saturation magnetization for target drug delivery applications. Iron oxide nanoparticles particles were synthesized by a reformed version of the co-precipitation method. The coating of polyvinyl alcohol along with doxorubicin loading was carried out by the physical immobilization method. X-ray diffraction confirmed the magnetite (Fe3O4) structure of particles that remained unchanged before and after polyvinyl alcohol coating and drug loading. Microstructure and morphological analysis was carried out by transmission electron microscopy revealing the formation of nanoparticles with an average size of 10 nm with slight variation after coating and drug loading. Transmission electron microscopy, energy dispersive, and Fourier transform infrared spectra further confirmed the conjugation of polymer and doxorubicin with iron oxide nanoparticles. The room temperature superparamagnetic behavior of polymer-coated and drug-loaded magnetite nanoparticles were studied by vibrating sample magnetometer. The variation in saturation magnetization after coating evaluated that a sufficient amount of polyvinyl alcohol would be 3 wt. % regarding the externally controlled movement of IONPs in blood under the influence of applied magnetic field for in-vivo target drug delivery. [ABSTRACT FROM AUTHOR]

Nanoparticles as solid colloidal particles are extensively studied and used as anticancer drug delivery agents because of their physical properties. This current research aims to prepare water base suspension of uncoated iron oxide nanoparticles and their biodistribution study to different organs, especially the brain, by using a single photon emission computed tomography gamma camera. The water‐based suspension of iron oxide nanoparticles was synthesised by a reformed version of the co‐precipitation method and labelled with Tc99m for intravenous injection. The nanoparticles were injected without surface modification. X‐ray diffraction (XRD), energy dispersive spectrometry (EDS) and transmission electron microscope (TEM) techniques were used for characterisation. Peaks of XRD and EDS indicate that the particles are magnetite and exist in aqueous suspension. The average diameter of iron oxide nanoparticles without any surface coating determined by TEM is 10 nm. These particles are capable of evading the reticuloendothelial system and can cross the blood‐brain barrier in the rabbit. The labelling efficiency of iron oxide nanoparticles labelled with Tc99m is 85%, which is good for the biodistribution study. The sufficient amount of iron oxide nanoparticles concentration in the brain as compared with the surrounding soft tissues and their long blood retention time indicates that the water‐based suspension of iron oxide nanoparticles may be an option for drug delivery into the brain. [ABSTRACT FROM AUTHOR]

Formulation and Evaluation of Kaempferol Loaded Nanoparticles against Experimentally Induced Hepatocellular Carcinoma: In Vitro and In Vivo Studies. Figure Graph: Figure 2 FTIR spectra of the Kaempferol (pure drug) and the prepared Kaempferol nanoparticle. Reference 1 Kazmi I., Al-Abbasi F.A., Afzal M., Altayb H.N., Nadeem M.S., Gupta G. Formulation and Evaluation of Kaempferol Loaded Nanoparticles against Experimentally Induced Hepatocellular Carcinoma: In Vitro and In Vivo Studies. [Extracted from the article]

Nanotechnology is a booming avenue in science and has a multitude of applications in health, agriculture, and industry. It exploits materials' size at nanoscale (1–100 nm) known as nanoparticles (NPs). These nanoscale constituents are made via chemical, physical, and biological methods; however, the biological approach offers multiple benefits over the other counterparts. This method utilizes various biological resources for synthesis (microbes, plants, and others), which act as a reducing and capping agent. Among these sources, microbes provide an excellent platform for synthesis and have been recently exploited in the synthesis of various metallic NPs, in particular iron. Owing to their biocompatible nature, superparamagnetic properties, small size efficient, permeability, and absorption, they have become an integral part of biomedical research. This review focuses on microbial synthesis of iron oxide nanoparticles using various species of bacteria, fungi, and yeast. Possible applications and challenges that need to be addressed have also been discussed in the review; in particular, their antimicrobial and anticancer potentials are discussed in detail along with possible mechanisms. Moreover, some other possible biomedical applications are also highlighted. Although iron oxide nanoparticles have revolutionized biomedical research, issues such as cytotoxicity and biodegradability are still a major bottleneck in the commercialization of these nanoparticle-based products. Addressing these issues should be the topmost priority so that the biomedical industry can reap maximum benefit from iron oxide nanoparticle-based products. [ABSTRACT FROM AUTHOR]

Non-noble metal containing catalysts for oxygen reduction reaction (ORR) are being targeted due to their low cost and availability. The rarity, high-cost, and self-poisoning of noble metals are the main drawbacks for the large-scale applications. Herein, a facile and simple synthetic strategy is adopted to prepare non-noble metal-based nitrogen doped carbon nanotubes (N-CNTs). The cobalt oxides (CoOx) nanoparticles are in-situ encapsulated inside these N-CNTs which are then treated with acid (HCl) and phosphidized to obtain CoOx-CoP/N-CNTs. High resolution transmission electron spectroscopy (HR-TEM) results reveal that the ends of N-CNTs are closed with nanoparticles. X-ray photoelectron spectroscopy (XPS) confirms the presence of cobalt oxide and cobalt phosphide nanoparticles. The catalyst CoOx-CoP/N-CNTs2 demonstrated E onset and E 1/2 of 0.96 V and 0.81 V, respectively in alkaline environment which is very much comparable to the state of art catalyst (20 wt% Pt/C). Acid treatment significantly enhances the electrocatalytic activity for ORR in comparison to material synthesized without prior treatment with acid. The catalyst exhibits excellent durability over 10,000 cycles and methanol tolerance to 0.5 M methanol addition. The enhanced ORR activity is attributed to synergistic effect of carbon matrix and encapsulated nanoparticles. • Cobalt oxides (CoOx) nanoparticles are in-situ encapsulated inside N-CNTs. • CoOx/N-CNTs treated with acid (HCl) and phosphidized to obtain CoOx-CoP/N-CNTs. • High resolution transmission electron spectroscopy results reveal that the ends of N-CNTs are closed with nanoparticles. • CoOx-CoP/N-CNTs2 demonstrated E onset and E 1/2 of 0.96 V and 0.81 V, respectively in alkaline environment. • The catalyst exhibited excellent durability over 10,000 cycles and methanol tolerance to 0.5 M methanol addition. [ABSTRACT FROM AUTHOR]

Simple Summary: Cancer is one of the major public health burdens in the world. To date, various conventional cancer therapies have been used, but these therapies are less effective and have severe side effects. Currently, in order to find a better cure for cancer, researchers have tried to explore new approaches with minimal toxicity and fewer side effects. In recent years, nanotechnology has been widely used in diseases management and holds a promising future in curing complex incurable diseases, in particular cancer. Biosynthesized metallic nanoparticles are eco-friendly and biocompatible, and can be used in cancer diagnostics, novel treatments, and drug delivery systems. This review gives an overview of the recent advancements in the biosynthesis of metallic nanoparticles (silver (Ag), gold (Au), zinc (Zn) and copper (Cu)) and their possible anti-cancer activities, with particular emphasis on the mechanisms of action, and future research prospects of nano-therapeutics are also discussed. Cancer is one of the foremost causes of death worldwide. Cancer develops because of mutation in genes that regulate normal cell cycle and cell division, thereby resulting in uncontrolled division and proliferation of cells. Various drugs have been used to treat cancer thus far; however, conventional chemotherapeutic drugs have lower bioavailability, rapid renal clearance, unequal delivery, and severe side effects. In the recent years, nanotechnology has flourished rapidly and has a multitude of applications in the biomedical field. Bio-mediated nanoparticles (NPs) are cost effective, safe, and biocompatible and have got substantial attention from researchers around the globe. Due to their safe profile and fewer side effects, these nanoscale materials offer a promising cure for cancer. Currently, various metallic NPs have been designed to cure or diagnose cancer; among these, silver (Ag), gold (Au), zinc (Zn) and copper (Cu) are the leading anti-cancer NPs. The anticancer potential of these NPs is attributed to the production of reactive oxygen species (ROS) in cellular compartments that eventually leads to activation of autophagic, apoptotic and necrotic death pathways. In this review, we summarized the recent advancements in the biosynthesis of Ag, Au, Zn and Cu NPs with emphasis on their mechanism of action. Moreover, nanotoxicity, as well as the future prospects and opportunities of nano-therapeutics, are also highlighted. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Barium oxide is used as an electron promoter to boost the photocatalytic activity of TiO 2 based, palladium supported photocatalysts for hydrogen production from water splitting. • The as-synthesized Pd-BaO/TiO 2 photocatalysts showed two times higher activity than Pd/TiO 2 photocatalyst. • The BaO greatly enhanced the electron transfer from the semiconductor conduction band to Pd centers by raising the Fermi level of TiO 2 during photo-irradiation. • Most importantly, Pd is present exclusively in zero oxidation state. Abstract Here we report a versatile strategy based on the use of BaO as an electron promoter to boost the photocatalytic activity of TiO 2 based, Pd supported photocatalysts for hydrogen production from water splitting. Pd-BaO nanoparticles were deposited on the TiO 2 surface by simple chemical reduction method using NaBH 4 as reductant. The as-synthesized Pd-BaO/TiO 2 photocatalysts showed a remarkably high performance in hydrogen production, approximately 29.6 mmol g−1h−1 using an ethanol-water mixture (5% ethanol and 95% water), which is two times higher than Pd/TiO 2 photocatalyst, where the latter is already regarded as the most active metal based TiO 2 photocatalysts for H 2 production. This high hydrogen production efficiency was attributed to the inherent high catalytic activity of palladium nanoparticles and electronic promotional effect of BaO. The Ba (in the form of BaO) greatly enhanced the electron transfer from the semiconductor conduction band to Pd centers by raising the Fermi level of TiO 2 during photo-irradiation. Most importantly, Pd is present exclusively in zero oxidation state, which is ideal for proton reduction in the as-prepared photocatalysts due to close proximity of highly electropositive BaO. The structural morphologies and mechanistic aspects of the Pd-BaO/TiO 2 photocatalysts are addressed by using UV–Vis/DRS, XRD, TEM, and XPS characterization techniques. [ABSTRACT FROM AUTHOR]

• Pt/Er nanoparticles are decorated on Cd-MOF derived hierarchical carbon. • Pt-Er@PCN-900 shows wide range porosity and large active sites. • Pt-Er@PCN-900 presented excellent ORR and HER catalytic activity. • Stability and durability of Pt-Er@PCN-900 is marvelous in alkaline media. Fabrication of Pt alloy with controlled morphology and size has drawn an attractive attention in developing active electrocatalysts for fuel cell and water splitting application. However, the effectively controlled synthesis strategy and morphology on N-doped carbon structure is still a challenging issue. Herein, a facile strategy for uniform dispersion of active sites of Pt/Er on the hierarchical N-doped carbon structure through pyrolysis in innert atmosphere is addopted. The developed product of Pt-Er@PCN-900 has exhibited efficacious trifunctional catalytic activity for hydrogen/oxygen evolution as well as oxygen reduction reaction. Comparatively, Pt-Er@PCN-900 with 8% Pt presents excellent performance than commercial 20%Pt/C. The present work highlights the importance of the rationalized dispersion of Pt/Er active sites for the future large-scale commercial applications of fuel cell and water splitting. [ABSTRACT FROM AUTHOR]

In this study, the micro-emulsion approach was adopted to fabricate rare earth (Nd) and transition metal (Cu) co-doped barium hexaferrite (Ba 1-x Nd x Fe 12-y Cu y O 19) nanoparticles (NPs). The fabricated co-doped and undoped materials were characterized by FTIR, XRD, and SEM techniques for structural and morphological investigation. Structural studies such as XRD and FTIR confirmed Nd and Cu doping at the tetrahedral and octahedral sites of barium hexaferrite, respectively. The SEM analysis made sure that the materials were successfully produced at the nanoscale. Dielectric measurements revealed that the dielectric constant and AC conductivity values of the co-doped sample were higher than those of the undoped sample. The VSM study confirms the improved magnetic properties of the sample after co-doping that facilitates its separation and reuse after photocatalytic experiments. The co-doped and undoped sample's photocatalytic activities (PCA) were explored by comparing their Methyl Green (MG) dye degradation efficiencies. The results revealed that the co-doped barium hexaferrite sample degraded almost 92.6% of the MG dye, while the undoped sample degraded just 37.4%. The higher PCA of the co-doped sample is credited to its structural defects, which adjust the band interval to increase electrical conductivity. In addition, the co-doped sample lost only 2% photocatalytic efficiency after five successive cycles, demonstrating its potential for reuse. Application studies have clearly shown that our Nd-Cu co-doped barium hexaferrite sample has a great potential for practical application to remove toxic dyes from the environment. [Display omitted] [ABSTRACT FROM AUTHOR]