Search

Over the past decades, the field of organic solar cells (OSCs) has witnessed a significant evolution in materials chemistry, which has resulted in a remarkable enhancement of device performance, achieving efficiencies of over 19%. The photoactive layer materials in OSCs play a crucial role in light absorption, charge generation, transport and stability. To facilitate the scale-up of OSCs, it is imperative to address the photostability of these electron acceptor and donor materials, as their photochemical degradation process remains a challenge during the photo-to-electric conversion. In this review, we present an overview of the development of electron acceptor and donor materials, emphasizing the crucial aspects of their chemical stability behavior that are linked to the photostability of OSCs. Throughout each section, we highlight the photochemical degradation pathways for electron acceptor and donor materials, and their link to device degradation. We also discuss the existing interdisciplinary challenges and obstacles that impede the development of photostable materials. Finally, we offer insights into strategies aimed at enhancing photochemical stability and discuss future directions for developing photostable photo-active layers, facilitating the commercialization of OSCs. [ABSTRACT FROM AUTHOR]

Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells. Non-fullerene-based organic solar cells generally suffer from poor thermal stability and especially in case of devices with thick active layers. Here, the authors report hexanary blends based on multi-component acceptor mixtures with a device efficiency of 17.6% and thermally stability for 23 days at 130 °C. [ABSTRACT FROM AUTHOR]

Molecular engineering of organic semiconductors provides a virtually unlimited number of possible structures, yet only a handful of combinations lead to state‐of‐the‐art efficiencies in photovoltaic applications. Thus, design rules that guide material development are needed. One such design principle is that in a bulk heterojunction consisting of an electron donor and lower bandgap acceptor an offset (ΔIE) of at least 0.45 eV is required between both materials ionization energies to overcome energy level bending at the donor–acceptor interface, in turn maximizing the charge separation yield and the cell's internal quantum efficiency. The present work studies energy losses associated with ΔIE and, based on 24 blends, finds that losses are minimal up to a ΔIE of 0.6 eV. Electroluminescence spectroscopy shows that low energy losses are achieved when the charge transfer state energy (ECT) is similar to the acceptor's optical bandgap (EgA). Further ΔIE increase lowers ECT with respect to EgA, thus decreasing VOC. Within that 0.45–0.6 eV ΔIE sweet range, the fill factor FF, hence the power conversion efficiency, increases only marginally as the FF is often already close to maximal for ΔIE = 0.45 eV. The results are extended to 76 binary and ternary blends. [ABSTRACT FROM AUTHOR]

Non‐fullerene acceptor (NFA)‐based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. The impact on QE of the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces is studied in blends of PBDB‐T‐2F donor with several pairs of lower bandgap NFAs. As in binary blends, the ionization energy offset between donor and acceptor (ΔIE) controls the QE and maximizes for ΔIE > 0.5 eV. However, ΔIE is not controlled by the individual NFAs IEs but by their average, weighted for their blending ratio. Using this property, the QE of a PBDB‐T‐2F:IEICO binary blend that has an insufficient ΔIE for charge generation is improved by adding a deep IE third component: IT‐4F. Combining two NFAs enables to optimize the D/A energy alignment and cells' QE without molecular engineering. [ABSTRACT FROM AUTHOR]

Following the 2nd release of the "Emerging PV reports," the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the "Emerging PV reports" extends the scope toward triple junction solar cells. [ABSTRACT FROM AUTHOR]

The formation of photoinduced traps resulting in the loss of electron mobility deteriorates the performance of organic solar cells under continuous light soaking. The genesis of these loss mechanisms is elucidated by examining the structural stability of halogenated ITIC derivative films and the phase behavior of the respective binary systems by blending with the donor polymer PBDBT‐2F. Under constant illumination, ITIC‐4Cl is found to maintain its structural integrity, whereas fluorine on the peripheral moieties of ITIC‐4F undergoes chemical substitution to form a mixture of ITIC and ITIC‐4F. Thermal analysis of the light‐soaked binary films reveals that ITIC‐4Cl loses its crystalline phase while the crystallinity of ITIC‐4F does not undergo changes. Further, it is shown that the addition of a small amount of ITIC‐4F as a third component hinders the loss of ITIC‐4Cl crystalline phase in bulk heterojunction blends through the formation of cocrystals. These results suggest that long‐range ordering of NFAs does not necessarily improve the photostability of organic solar cells and that the addition of a third component, irrespective of the crystalline nature, can prevent changes in bulk heterojunction blend nanostructure. [ABSTRACT FROM AUTHOR]

Following the 1st release of the "Emerging photovoltaic (PV) reports", the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd instalment of the "Emerging PV reports" extends the scope toward tandem solar cells and presents the current state‐of‐the‐art in tandem solar cell performance for various material combinations. [ABSTRACT FROM AUTHOR]

Efficiencies of organic solar cells have practically doubled since the development of non‐fullerene acceptors (NFAs). However, generic chemical design rules for donor‐NFA combinations are still needed. Such rules are proposed by analyzing inhomogeneous electrostatic fields at the donor–acceptor interface. It is shown that an acceptor–donor–acceptor molecular architecture, and molecular alignment parallel to the interface, results in energy level bending that destabilizes the charge transfer state, thus promoting its dissociation into free charges. By analyzing a series of PCE10:NFA solar cells, with NFAs including Y6, IEICO, and ITIC, as well as their halogenated derivatives, it is suggested that the molecular quadrupole moment of ≈75 Debye Å balances the losses in the open circuit voltage and gains in charge generation efficiency. [ABSTRACT FROM AUTHOR]

Sputtered nickel oxide (NiOx) is an attractive hole‐transport layer for efficient, stable, and large‐area p‐i‐n metal‐halide perovskite solar cells (PSCs). However, surface traps and undesirable chemical reactions at the NiOx/perovskite interface are limiting the performance of NiOx‐based PSCs. To address these issues simultaneously, an efficient NiOx/perovskite interface passivation strategy by using an organometallic dye molecule (N719) is reported. This molecule concurrently passivates NiOx and perovskite surface traps, and facilitates charge transport. Consequently, the power conversion efficiency (PCE) of single‐junction p‐i‐n PSCs increases from 17.3% to 20.4% (the highest reported value for sputtered‐NiOx based PSCs). Notably, the N719 molecule self‐anchors and conformally covers NiOx films deposited on complex surfaces. This enables highly efficient textured monolithic p‐i‐n perovskite/silicon tandem solar cells, reaching PCEs up to 26.2% (23.5% without dye passivation) with a high processing yield. The N719 layer also forms a barrier that prevents undesirable chemical reactions at the NiOx/perovskite interface, significantly improving device stability. These findings provide critical insights for improved passivation of the NiOx/perovskite interface, and the fabrication of highly efficient, robust, and large‐area perovskite‐based optoelectronic devices. [ABSTRACT FROM AUTHOR]

Monolithically stacked tandem solar cells present opportunities to absorb more of the sun's radiation while reducing the degree of energetic loss through thermalization. In these applications, the bandgap of the tandem's constituent subcells must be carefully adjusted so as to avoid competition for photons. Organic photovoltaics based on nonfullerene acceptors (NFAs) have recently exploded in popularity owing to the ease with which their electrical and optical properties can be tuned through chemistry. Here, highly complementary and efficient 2‐terminal tandem solar cells are reported based on a wide bandgap amorphous silicon absorber, and a narrow bandgap NFA bulk‐heterojunction with power conversion efficiencies (PCEs) exceeding 15%. Interface engineering of this tandem device allows for high PCEs across a wide range of light intensities both above and below "1 sun." Furthermore, the addition of an inorganic silicon subcell enhances the operational stability of the tandem by reducing the light‐stress experienced by the bulk heterojunction, resolving a long‐standing stumbling block in organic photovoltaic research. [ABSTRACT FROM AUTHOR]

Slot‐die (SD) coating is used to fabricate fully solution processed organic solar cells (OSCs) based on a blend of high performance donor polymer (PTB7‐Th) and a non‐fullerene acceptor (IEICO‐4F) for stable devices over extended periods of operation. The optimization of a sequential deposition process of transport and active layers, under ambient conditions, enable high efficiency slot‐die coated solar cells with remarkable power conversion efficiencies (PCE) > 11.0% to bridge the gap between lab‐to‐fab. Fully slot‐die coated inverted OSCs are demonstrated with efficiencies reaching 11% along with 1 cm2 devices, proving the scalability and reproducibility of the proposed technique. Further, replacing the evaporated Ag electrode with solution processed Ag nanowire (AgNW) electrodes shows the highest light utilization efficiency of 5.26% for semi‐transparent OSC with a PCE of 9.07% and average visible transmission of 58%. [ABSTRACT FROM AUTHOR]

A critical bottleneck for improving the performance of organic solar cells (OSC) is minimising non-radiative losses in the interfacial charge-transfer (CT) state via the formation of hybrid energetic states. This requires small energetic offsets often detrimental for high external quantum efficiency (EQE). Here, we obtain OSC with both non-radiative voltage losses (0.24 V) and photocurrent losses (EQE > 80%) simultaneously minimised. The interfacial CT states separate into free carriers with ≈40-ps time constant. We combine device and spectroscopic data to model the thermodynamics of charge separation and extraction, revealing that the relatively high performance of the devices arises from an optimal adjustment of the CT state energy, which determines how the available overall driving force is efficiently used to maximize both exciton splitting and charge separation. The model proposed is universal for donor:acceptor (D:A) with low driving forces and predicts which D:A will benefit from a morphology optimization for highly efficient OSC. Understanding the mechanism of non-radiative losses in organic photovoltaics is crucial to improve the performance further. Here, the authors use combined device and spectroscopic data to reveal universal model to maximise exciton splitting and charge separation by adjusting the energy of charge transfer state. [ABSTRACT FROM AUTHOR]

Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs. [ABSTRACT FROM AUTHOR]

New polymer donors and nonfullerene acceptors have elevated the performance and stability of solar cells to higher grounds. To achieve their full potential, they require their adaptation to scalable and cost‐effective solution manufacturing techniques for large area deposition. Likewise, formulating scalable solution‐based transport layer inks that are compatible with the photoactive layer is imperative. This manuscript reports the full integration of solution‐based transport layers and electrode alongside a PTB7‐Th:IEICO‐4F bulk heterojunction in inverted architecture through inkjet‐printing, resulting in power conversion efficiencies up to 12.4% opaque devices and 9.5% semitransparent devices with average visible transmittance values of 50.1%, including hole transport layer. The wetting envelope of the highly‐hydrophobic photoactive layer alongside the surface energy of candidate solutions and solvents allows the formulation of thick transport layer inks that are compatible with the drop‐on‐demand inkjet‐printing process and yield uniform and homogenous films. Moreover, the surface energy components of the donor and acceptor serves as a fingerprint to assess the vertical stratification of the photoactive layer with the inclusion of different solvents. This methodology addresses a scale‐up bottleneck of solution‐based transport layers for high‐efficiency organic cells, enabling its adaptation to high‐throughput techniques including slot‐die and roll‐to‐roll coating. [ABSTRACT FROM AUTHOR]

While photovoltaic blends based on non‐fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene‐based acceptors that readily co‐crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine‐grained ternary blend with nanometer‐sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high‐temperature processing protocols, which are needed for upscaling and high‐throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability. [ABSTRACT FROM AUTHOR]

Power conversion efficiencies of perovskite solar cells (PSCs) have rapidly increased from 3.8% to a certified 25.2% within only a decade. Eliminating possible recombination losses at the interfaces is essential to further improve both efficiency and stability of this class of emerging photovoltaic technology. Herein, a simple approach for improving the electron extraction of the PC60BM electron transport layer (ETL) is presented by sequentially depositing Al:ZnO (AZO) and triphenyl‐phosphine oxide (TPPO) on top of it, in a p–i–n device configuration. The efficiency of the resulting CH3NH3PbI3‐based solar cell is shown to improve from 14.6%, measured for the control PC60BM‐only cell, to 17.9% for double‐ETL (PC60BM/AZO) and 19.2% for triple‐ETL (PC60BM/AZO/TPPO)‐based devices, respectively. Optimized triple‐ETL‐based cells exhibit high fill factor of 82%. The combination of electrical and quantum mechanical calculations shows that efficiency improvement is attributed to reduced trap‐assisted recombination at the interface and better energy level alignment due to chemical interactions between PC60BM, AZO, and TPPO. Moreover, it is shown that the use of multilayer ETL results in better device stability (T80 ≈ 800 h) under constant illumination. This work opens new possibilities for inexpensive highly efficient and stable multilayered contacts for PSCs by combining organic small molecules and metal oxides. [ABSTRACT FROM AUTHOR]

Ultra‐lightweight solar cells have attracted enormous attention due to their ultra‐conformability, flexibility, and compatibility with applications including electronic skin or miniaturized electronics for biological applications. With the latest advancements in printing technologies, printing ultrathin electronics is becoming now a reality. This work offers an easy path to fabricate indium tin oxide (ITO)‐free ultra‐lightweight organic solar cells through inkjet‐printing while preserving high efficiencies. A method consisting of the modification of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink with a methoxysilane‐based cross‐linker (3‐glycidyloxypropyl)trimethoxysilane (GOPS)) is presented to chemically modify the structure of the electrode layer. Combined with plasma and solvent post‐treatments, this approach prevents shunts and ensures precise patterning of solar cells. By using poly(3‐hexylthiophene) along rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR), the power conversion efficiency (PCE) of the fully printed solar cells is boosted up to 4.73% and fill factors approaching 65%. All inkjet‐printed ultrathin solar cells on a 1.7 µm thick biocompatible parylene substrate are fabricated with PCE reaching up to 3.6% and high power‐per‐weight values of 6.3 W g−1. After encapsulation, the cells retain their performance after being exposed for 6 h to aqueous environments such as water, seawater, or phosphate buffered saline, paving the way for their integration in more complex circuits for biological systems. [ABSTRACT FROM AUTHOR]

Solution‐processable halide perovskites have emerged as strong contenders for next‐generation solar cells owing to their favorable optoelectronic properties. To maintain the efficiency momentum of perovskite solar cells (PSCs), development of advanced processing techniques, particularly for the perovskite layer, is imperative. There is a close correlation between the quality of the perovskite layer and its photophysical properties: Highly crystalline large grains with uniform morphology of the perovskite layer and their interface with charge transporters are crucial for achieving high performance. Significant efforts have been dedicated to achieve perovskite films with large grains reaching the millimeter‐scale for high‐efficiency PSCs. Recent work showcases a transition from large grain polycrystalline to single‐crystalline (SC) PSCs made possible by the facile growth of perovskite single crystals. In this review, the recent progress of the large grain polycrystalline PSCs and grain boundary‐free SC‐PSCs is reported, particularly focusing on the recent approach of depositing large‐grained perovskite layers and single crystal growth technique, that have been adopted for fabrication of efficient PSCs. In addition, prospects of SC‐PSCs and their further development in terms of efficiency, device design, scalability, and stability are discussed. [ABSTRACT FROM AUTHOR]

Fullerenes have formed an integral part of high performance organic solar cells over the last 20 years, however their inherent limitations in terms of synthetic flexibility, cost and stability have acted as a motivation to develop replacements; the so-called non-fullerene electron acceptors. A rapid evolution of such materials has taken place over the last few years, yielding a number of promising candidates that can exceed the device performance of fullerenes and provide opportunities to improve upon the stability and processability of organic solar cells. In this review we explore the structure–property relationships of a library of non-fullerene acceptors, highlighting the important chemical modifications that have led to progress in the field and provide an outlook for future innovations in electron acceptors for use in organic photovoltaics. [ABSTRACT FROM AUTHOR]

Abstract: Poly (3‐hexylthiophene) (P3HT) was an early frontrunner in the development of donor polymers to be used in organic photovoltaics. A relatively straightforward and inexpensive synthesis suggests that it may be the most viable donor polymer to use in large‐scale commercial organic solar cells. Replacing fullerenes with new electron acceptors has led to significant improvements in device performance and stability, with devices now able to exceed an efficiency of 7%. Past studies have reported a dependence of device performance on the molecular weight of the polymer in fullerene‐containing blends, however, with nonfullerene acceptors now showing promise a similar study was needed. P3HT blends, with two nonfullerene acceptors (O‐IDTBR and EH‐IDTBR), were probed using a number of polymer batches with varying molecular weights. O‐IDTBR was shown to exhibit a dependence on the polymer molecular weight, with optimal performance achieved with a 34 kDa polymer, while EH‐IDTBR displayed an independence in performance with varying polymer molecular weight. Probing the thermal and morphological behavior of the P3HT:O‐IDTBR blends suggests that an optimal morphology with pronounced donor and acceptor domains was only achieved with the 34 kDa polymer, and a greater degree of mixing was exhibited in the other blends, likely leading to poorer device performance. [ABSTRACT FROM AUTHOR]

Abstract: N‐type organic small molecules (SMs) are attracting attention in the organic electronics field, due to their easy purification procedures with high yield. However, only a few reports show SMs that perform well in both organic field‐effect transistors (OFETs) and organic solar cells (OSCs). Here, the synthesis and characterization of an n‐type small molecule with an indacenodithieno[3,2‐b]thiophene (IDTT) core unit and linear alkylated side chain (C16) (IDTTIC) are reported. Compared to the state‐of‐the‐art n‐type molecule IDTIC, IDTTIC exhibits smaller optical bandgap and higher absorption coefficient, which is due to the enhanced intramolecular effect. After mixing with the polymer donor PBDB‐T, IDTIC‐based solar cells deliver a power conversion efficiency of only 5.67%. In stark contrast, the OSC performance of IDTTIC improves significantly to 11.2%. It is found that the superior photovoltaic properties of PBDB‐T:IDTTIC blends are mainly due to reduced trap‐assisted recombination and enhanced molecular packing coherence length and higher domain purity when compared to IDTIC. Moreover, a significantly higher electron mobility of 0.50 cm2 V−1 s−1 for IDTTIC in OFET devices than for IDTIC (0.15 cm2 V−1 s−1) is obtained. These superior performances in OSCs and OFETs demonstrate that SMs with extended π‐conjugation of the backbone possess a great potential for application in organic electronic devices. [ABSTRACT FROM AUTHOR]

Nonfullerene solar cells have increased their efficiencies up to 13%, yet quantum efficiencies are still limited to 80%. Here we report efficient nonfullerene solar cells with quantum efficiencies approaching unity. This is achieved with overlapping absorption bands of donor and acceptor that increases the photon absorption strength in the range from about 570 to 700 nm, thus, almost all incident photons are absorbed in the active layer. The charges generated are found to dissociate with negligible geminate recombination losses resulting in a short-circuit current density of 20 mA cm-2 along with open-circuit voltages >1 V, which is remarkable for a 1.6 eV bandgap system. Most importantly, the unique nano-morphology of the donor:acceptor blend results in a substantially improved stability under illumination. Understanding the efficient charge separation in nonfullerene acceptors can pave the way to robust and recombination-free organic solar cells. [ABSTRACT FROM AUTHOR]

Abstract: Organic bulk heterojunction solar cells based on small molecule acceptors have recently seen a rapid rise in the power conversion efficiency with values exceeding 13%. This impressive achievement has been obtained by simultaneous reduction of voltage and charge recombination losses within this class of materials as compared to fullerene‐based solar cells. In this contribution, the authors review the current understanding of the relevant photophysical processes in highly efficient nonfullerene acceptor (NFA) small molecules. Charge generation, recombination, and charge transport is discussed in comparison to fullerene‐based composites. Finally, the authors review the superior light and thermal stability of nonfullerene small molecule acceptor based solar cells, and highlight the importance of NFA‐based composites that enable devices without early performance loss, thus resembling so‐called burn‐in free devices. [ABSTRACT FROM AUTHOR]

Abstract: Nonfullerene acceptors (NFAs) in blends with highly crystalline donor polymers have been shown to yield particularly high device voltage outputs, but typically more modest quantum yields for photocurrent generation as well as often lower fill factors (FF). In this study, we employ transient optical and optoelectronic analysis to elucidate the factors determining device photocurrent and FF in blends of the highly crystalline donor polymer PffBT4T‐2OD with the promising NFA FBR or the more widely studied fullerene acceptor PC71BM. Geminate recombination losses, as measured by ultrafast transient absorption spectroscopy, are observed to be significantly higher for PffBT4T‐2OD:FBR blends. This is assigned to the smaller LUMO‐LUMO offset of the PffBT4T‐2OD:FBR blends relative to PffBT4T‐2OD:PC71BM, resulting in the lower photocurrent generation efficiency obtained with FBR. Employing time delayed charge extraction measurements, these geminate recombination losses are observed to be field dependent, resulting in the lower FF observed with PffBT4T‐2OD:FBR devices. These data therefore provide a detailed understanding of the impact of acceptor design, and particularly acceptor energetics, on organic solar cell performance. Our study concludes with a discussion of the implications of these results for the design of NFAs in organic solar cells. [ABSTRACT FROM AUTHOR]

Organic semiconductors are in general known to have an inherently lower charge carrier mobility compared to their inorganic counterparts. Bimolecular recombination of holes and electrons is an important loss mechanism and can often be described by the Langevin recombination model. Here, the device physics of bulk heterojunction solar cells based on a nonfullerene acceptor (IDTBR) in combination with poly(3-hexylthiophene) (P3HT) are elucidated, showing an unprecedentedly low bimolecular recombination rate. The high fill factor observed (above 65%) is attributed to non-Langevin behavior with a Langevin prefactor (β/βL) of 1.9 × 10−4. The absence of parasitic recombination and high charge carrier lifetimes in P3HT:IDTBR solar cells inform an almost ideal bimolecular recombination behavior. This exceptional recombination behavior is explored to fabricate devices with layer thicknesses up to 450 nm without significant performance losses. The determination of the photoexcited carrier mobility by time-of-flight measurements reveals a long-lived and nonthermalized carrier transport as the origin for the exceptional transport physics. The crystalline microstructure arrangement of both components is suggested to be decisive for this slow recombination dynamics. Further, the thickness-independent power conversion efficiency is of utmost technological relevance for upscaling production and reiterates the importance of understanding material design in the context of low bimolecular recombination. [ABSTRACT FROM AUTHOR]

Organic solar cells that are free of burn-in, the commonly observed rapid performance loss under light, are presented. The solar cells are based on poly(3-hexylthiophene) (P3HT) with varying molecular weights and a nonfullerene acceptor (rhodanine-benzothiadiazole-coupled indacenodithiophene, IDTBR) and are fabricated in air. P3HT:IDTBR solar cells light-soaked over the course of 2000 h lose about 5% of power conversion efficiency (PCE), in stark contrast to [6,6]-Phenyl C61 butyric acid methyl ester (PCBM)-based solar cells whose PCE shows a burn-in that extends over several hundreds of hours and levels off at a loss of ≈34%. Replacing PCBM with IDTBR prevents short-circuit current losses due to fullerene dimerization and inhibits disorder-induced open-circuit voltage losses, indicating a very robust device operation that is insensitive to defect states. Small losses in fill factor over time are proposed to originate from polymer or interface defects. Finally, the combination of enhanced efficiency and stability in P3HT:IDTBR increases the lifetime energy yield by more than a factor of 10 when compared with the same type of devices using a fullerene-based acceptor instead. [ABSTRACT FROM AUTHOR]

The photovoltaic performance of blends of a series of 4,4′-Difluoro-4-bora-3a,4a-diaza-s-indacenes)-based (BODIPY) conjugated polymers donors with fullerene electron acceptors is investigated. Despite the high Voc values observed, solar cell device yields relatively low power conversion efficiencies. Our study takes into account the materials’ structure-property relationship, light harvesting capabilities, charge transport, collection properties and morphological characteristics to elucidate factors affecting the photovoltaic performance in this class of polymers. We show that elimination of low molecular weight species and suitable electrodes for hole collection can be used to overcome some of the observed limitations on photovoltaic performance. [ABSTRACT FROM AUTHOR]

The photovoltaic performance and optoelectronic properties of a donor-acceptor copolymer are reported based on indacenodithienothiophene (IDTT) and 2,3-bis(3-(octyloxy)phenyl)quinoxaline moieties (PIDTTQ) as a function of the number-average molecular weight ( Mn). Current-voltage measurements and photoinduced charge carrier extraction by linear increasing voltage (photo-CELIV) reveal improved charge generation and charge transport properties in these high band gap systems with increasing Mn, while polymers with low molecular weight suffer from diminished charge carrier extraction because of low mobility-lifetime ( μτ) product. By combining Fourier-transform photocurrent spectroscopy (FTPS) with electroluminscence spectroscopy, it is demonstrate that increasing Mn reduces the nonradiative recombination losses. Solar cells based on PIDTTQ with Mn = 58 kD feature a power conversion efficiency of 6.0% and a charge carrier mobility of 2.1 × 10−4 cm2 V−1 s−1 when doctor bladed in air, without the need for thermal treatment. This study exhibits the strong correlations between polymer fractionation and its optoelectronics characteristics, which informs the polymer design rules toward highly efficient organic solar cells. [ABSTRACT FROM AUTHOR]

The enormous synthetic efforts on novel solar cell materials require a reliable and fast technique for the rapid screening of novel donor/acceptor combinations in order to quickly and reliably estimate their optimized parameters. Here, we report the applicability of such a versatile and fast evaluation technique for bulk heterojunction (BHJ) organic photovoltaics (OPV) by utilizing a steady-state photoluminescence (PL) method confirmed by electroluminescence (EL) measurements. A strong relation has been observed between the residual singlet emission and the charge transfer state emission in the blend. Using this relation, a figure of merit (FOM) is defined from photoluminescence and also electroluminescence measurements for qualitative analysis and shown to precisely anticipate the optimized blend parameters of bulk heterojunction films. Photoluminescence allows contactless evaluation of the photoactive layer and can be used to predict the optimized conditions for the best polymer–fullerene combination. Most interestingly, the contactless, PL-based FOM method has the potential to be integrated as a fast and reliable inline tool for quality control and material optimization. [ABSTRACT FROM AUTHOR]

The tandem concept involves stacking two or more cells with complementary absorption spectra in series or parallel connection, harvesting photons at the highest possible potential. It is strongly suggested that the roll-to-roll production of organic solar cells will employ the tandem concept to enhance the power conversion efficiency (PCE). However, due to the undeveloped deposition techniques, the challenges in ink formulation as well as the lack of commercially available high performance active materials, roll-to-roll fabrication of highly efficient organic tandem solar cells currently presents a major challenge. The reported high PCE values from lab-scale spin-coated devices are, of course, representative, but not helpful for commercialization. Here, organic tandem solar cells with exceptionally high fill factors and PCE values of 7.66% (on glass) and 5.56% (on flexible substrate), which are the highest values for the solution-processed tandem solar cells fabricated by a mass-production compatible coating technique under ambient conditions, are demonstrated. To predict the highest possible performance of tandem solar cells, optical simulation based on experimentally feasible values is performed. A maximum PCE of 21% is theoretically achievable for an organic tandem solar cell based on the optimized bandgaps and achieved fill factors. [ABSTRACT FROM AUTHOR]

High fill factors have only recently become commonplace in nonfullerene‐based organic solar cells, with the balance of charge carrier mobilities often cited as the contributing factor. Here an end‐group modification to a commonly used nonfullerene acceptor (O‐IDTBR) is reported, in which the rhodanine end groups are replaced with dicyano moieties, resulting in the acceptor O‐IDTBCN. This new acceptor affords significant improvement in the fill factor (73%) and photocurrent (19.8 mA cm−2) in organic solar cells with the low bandgap polymer PTB7‐Th. A narrowing of the bandgap, as a result of greater push–pull hybridization, allows complementary absorption to the donor and thus improved photon harvesting. Additionally, the measurement of charge carrier mobilities and lifetimes in both systems reveal that the PTB7‐Th:O‐IDTBCN blend possesses more balanced charge carrier mobilities, and longer lifetimes. Morphology studies reveal a slightly greater degree of molecular mixing of the O‐IDTBCN when blended with PTB7‐Th, despite the greater and more balanced charge carrier mobilities in this blend. [ABSTRACT FROM AUTHOR]

Molecular orientation and π–π stacking of nonfullerene acceptors (NFAs) determine its domain size and purity in bulk‐heterojunction blends with a polymer donor. Two novel NFAs featuring an indacenobis(dithieno[3,2‐b:2ʹ,3ʹ‐d]pyrrol) core with meta‐ or para‐alkoxyphenyl sidechains are designed and denoted as m‐INPOIC or p‐INPOIC, respectively. The impact of the alkoxyl group positioning on molecular orientation and photovoltaic performance of NFAs is revealed through a comparison study with the counterpart (INPIC‐4F) bearing para‐alkylphenyl sidechains. With inward constriction toward the conjugated backbone, m‐INPOIC presents predominant face‐on orientation to promote charge transport. The as‐cast organic solar cells (OSCs) by blending m‐INPOIC and PBDB‐T as active layers exhibit a power conversion efficiency (PCE) of 12.1%. By introducing PC71BM as the solid processing‐aid, the ternary OSCs are further optimized to deliver an impressive PCE of 14.0%, which is among the highest PCEs for as‐cast single‐junction OSCs reported in literature to date. More attractively, PBDB‐T:m‐INPOIC:PC71BM based OSCs exhibit over 11% PCEs even with an active layer thickness over 300 nm. And the devices can retain over 95% of PCE after storage for 20 days. The outstanding tolerance to film thickness and outstanding stability of the as‐cast devices make m‐INPOIC a promising candidate NFA for large‐scale solution‐processable OSCs. [ABSTRACT FROM AUTHOR]

The high crystallinity and ability to harvest near‐infrared photons make diketopyrrolopyrrole (DPP)‐based polymers one of the most promising donors for high performing organic solar cells (OSCs). However, DPP‐based OSC devices still suffer from the trade‐off between energetic loss (Eloss) and maximum external quantum efficiency (EQEmax), which significantly hinders their potential. Thus far, the replacement of fullerenes with small molecule acceptors did not wisdom the performance development of DPP‐donor‐based solar cells due to severe charge recombination issues. In this work, efficient DPP‐based solar cells are reported using low bandgap fused ring electron acceptor, IEICO‐4F. PBDTT‐DPP:IEICO‐4F OSC devices deliver a champion power conversion efficiency of 9.66% with successful interface engineering along with low Eloss of 0.57 eV and a high EQEmax (>70%). [ABSTRACT FROM AUTHOR]

Novel emerging materials for organic solar cells, such as nonfullerene acceptors, are paving the way for commercialization of organic photovoltaics. Their utilization in unconventional applications, such as conformable and disposable electronics, has turned the focus to inkjet printing as a fabrication method with advantages including low material usage, rapid digital design changes, and high resolution. In this work, the fabrication of efficient nonfullerene acceptor devices through inkjet printing for organic photovoltaic applications is reported for the first time. The engineering of printable poly‐3‐hexylthiophene:rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR) inks is centered on tuning the rheological properties for proper droplet ejection and the selection of solvents, including hydrocarbons, that meet solubility and volatility requirements to avoid common inkjet printing complications like nozzle clogging. The optimization of printing parameters including drop spacing and deposition temperatures results in homogeneous P3HT:O‐IDTBR films with device efficiencies of up to 6.47% for small lab‐scale devices (0.1 cm2), comparable with that of spin‐coating or blade‐coating. A 2 cm2 inkjet‐printed device is also shown to achieve a remarkable efficiency of 6%. To demonstrate their potential usage in customized applications, large‐area devices are fabricated in the shape of a marine turtle with 4.76% efficiency, showcasing the versatility of the inkjet‐printing process for efficient organic photovoltaics. [ABSTRACT FROM AUTHOR]

Charge accumulation at the electron and hole transport layers generates anomalous electrical behavior in perovskite solar cells (PSCs). Hysteresis in the current–voltage characteristic and recombination at the interfaces are the clearest manifestations of this phenomenon, which compromises device performance and stability. Here, the underlying charge‐carrier dynamics of a variety of PSCs are investigated by analyzing their transient photocurrent response. Towards shorter time scales, PSCs often show increasingly severe hysteretic responses. This phenomenon is correlated with the presence of interfacial accumulated charges that hinders the photogenerated carrier extraction process. However, introducing passivating contacts improves the carrier‐injection properties and the devices become completely hysteresis free. These results underline the importance of contact passivation for PSCs and the need to further develop new passivating interlayers that simultaneously eliminate charge‐carrier recombination and provide selective transport for each carrier type at the PSC's contacts. Perovskite ions, under the influence of an electric field, migrate and accumulate at transport layer interfaces. This reduces the extraction of photo‐generated carriers and induces hysteresis in the current/voltage scan. Here, a solution via contact‐passivation of the electron extraction layer is presented. The passivating contacts reduce the influence of the ions and greatly improve the overall performances of solar cells. [ABSTRACT FROM AUTHOR]

Small‐molecule‐based non‐fullerene acceptors (NFAs) are emerging as a new field in organic photovoltaics, due to their structural versatility, the tunability of their energy levels, and their ease of synthesis. High‐efficiency polymer donors have been tested with these non‐fullerene acceptors in order to further boost the efficiency of organic solar cells. Most of the polymer:fullerene systems are optimized with solvent additives for high efficiency, while little attention has been paid to NFA‐based solar cells so far. In this report, the effect of the most common additive, 1,8‐diiodooctane (DIO), on PTB7‐Th:PC71BM solar cells is investigated and it is compared with non‐fullerene acceptor 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno‐[1,2‐b:5,6b′]di‐thiophene (ITIC) devices. It is interesting that the high boiling solvent additive does have a negative impact on the power conversion efficiency when PTB7‐Th is blended with ITIC acceptor. The solar cell devices are studied in terms of their optical, photophysical, and morphological properties and find out that PTB7‐Th:ITIC devices with DIO results in coarser domains, reduced absorption strength, and slightly lower mobility, while DIO improves the absorption strength of the PTB7‐Th:PC71BM blend film and increase the aggregation of PC71BM in the blend, resulting in higher fill factor and Jsc. PTB7‐Th:PC71BM and PTB7‐Th:ITIC blends are selected as model systems to analyze the effect of additive in fullerene and non‐fullerene acceptor based devices. A diametrically opposite situation occurs in ITIC‐based devices compared to fullerene devices upon addition of 1,8‐diiodooctane. The reason for the drastic performance drop is the formation of a well‐woven pathway, which increases phase separation of blend matrix and surface roughness. [ABSTRACT FROM AUTHOR]

A novel fused heterocycle-flanked diketopyrrolopyrrole (DPP) monomer, thieno[2,3-b]pyridine diketopyrrolopyrrole (TPDPP), was designed and synthesized. When copolymerized with 3,4-difluorothiophene using Stille coupling polymerization, the new polymer pTPDPP-TF possesses a highly planar conjugated polymer backbone due to the fused thieno[2,3-b]pyridine flanking unit that effectively alleviates the steric hindrance with both the central DPP core and the 3,4-difluorothiophene repeat unit. This new polymer exhibits a high electron affinity (EA) of -4.1 eV and was successfully utilized as an n-type polymer semiconductor for applications in organic field-effect transistors (OFETs) and all polymer solar cells. A promising n-type charge carrier mobility of 0.1 cm2 V-1 s-1 was obtained in bottom-contact, top-gate OFETs, and a power conversion efficiency (PCE) of 2.72% with a high open-circuit voltage (VOC) of 1.04 V was achieved for all polymer solar cells using PTB7-Th as the polymer donor. [ABSTRACT FROM AUTHOR]