Search

This article puts forward a hybrid model predictive control (H-MPC) for an inner-interleaved hybrid multilevel converter (IHMC). The sign patterns of the original and shifted reference vectors in the original and virtual space vector diagrams (VSVDs) are used, respectively, to realize the phase-disposition pulsewidth modulation (PWM) and determine the low-frequency switching states. Then, the three adjacent vectors are selected in the second-layer VSVD and the optimal current tracking is safeguarded by the duty cycle optimization of the three adjacent vectors. Finally, through applying the phase-shifted PWM to the two interleaved legs, a constant and doubled equivalent switching frequency can be achieved, which further paves the way for dc-link and floating capacitor voltages balancing and circulating current mitigation with the use of the straightforward duty cycle adjustments. The proposed H-MPC enables the decoupling of the low- and high-frequency stages in the IHMC and also reduces both output current ripples and computational burden while achieving a constant switching frequency simultaneously. Comprehensive simulation and experimental studies on an all silicon carbide prototype verify the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

A series of novel externally reconfigurable power electronic modules (RPEMs) are invented to increase the flexibility of power modules and their application purposes. In this article, the concept of RPEMs, their switching arrangements, and power-module-based architectural design are demonstrated. An RPEM is then designed, analyzed through simulations, and compared with the conventional fixed-configuration power electronic modules. The sizes of the power modules and used power terminals are kept similar to avoid any differences in power loop inductance values solely due to various trace pad sizes. In addition, similar gate/source pads and signal pins are used for all of the designed power modules to have constant switching dynamics in all modules. The comparison results show that the internal parasitic inductance and performance are still comparable with the conventional modules despite having high configurability. The designed RPEM and a conventional full-bridge (FB) power module are fabricated and characterized. The experimental tests show that the difference between the overshoot voltages on both RPEM and FB power modules is less than 2%. Such flexibility without compromising the power module performance decreases the engineering time for designing different power modules for various power electronic converters; hence, the production speed can be improved while decreasing the overall module cost. [ABSTRACT FROM AUTHOR]

Although LLC converters are attractive in industrial applications due to its advantages of soft switching, high efficiency, and simple control, in wide voltage gain range applications, large switching frequency operating range is required, which may cause the loss of soft switching operation and existence of control instability issue. In this article, a novel LLC converter with two LLC resonant tanks is proposed. The proposed converter has three operation modes, namely, dual full-bridge operation mode, full-bridge operation mode, and half-bridge operation mode, which can cover the high voltage gain range, medium voltage gain range, and low voltage gain range operations, respectively. The operational principles of the proposed converter are presented, and brief design considerations are discussed. A 250 W experimental prototype with six times input voltage range (50–300 V) was built to validate the theoretical analysis of the proposed converter. Comparisons among different LLC topologies for wide voltage gain range applications are made. [ABSTRACT FROM AUTHOR]

The cascaded H-bridge (CHB) inverter is one of the most attractive multilevel topologies for renewable energy applications. Due to the fact that CHB inverters employ a large number of components, they suffer from a higher probability of fault, which reduces the system reliability. A fault-tolerant operation for a CHB inverter is described in this article. New features ensure reliable and robust operation of the converter in the event of a fault. The proposed strategy uses an additional cross-coupled CHB (X-CHB) unit in companion with the existing CHB units to support the output voltage and ensure continuity of operation in the event of an open/short-circuit fault. The operation of the proposed X-CHB inverter is described in detail. Simulation and experimental verification of the proposed concept are demonstrated using a seven-level CHB. Both simulation and experimental results confirm the fault-tolerant operation of the X-CHB for a battery energy storage system in case of switch faults. [ABSTRACT FROM AUTHOR]