Search

This article puts forward a hybrid model predictive control (H-MPC) for an inner-interleaved hybrid multilevel converter (IHMC). The sign patterns of the original and shifted reference vectors in the original and virtual space vector diagrams (VSVDs) are used, respectively, to realize the phase-disposition pulsewidth modulation (PWM) and determine the low-frequency switching states. Then, the three adjacent vectors are selected in the second-layer VSVD and the optimal current tracking is safeguarded by the duty cycle optimization of the three adjacent vectors. Finally, through applying the phase-shifted PWM to the two interleaved legs, a constant and doubled equivalent switching frequency can be achieved, which further paves the way for dc-link and floating capacitor voltages balancing and circulating current mitigation with the use of the straightforward duty cycle adjustments. The proposed H-MPC enables the decoupling of the low- and high-frequency stages in the IHMC and also reduces both output current ripples and computational burden while achieving a constant switching frequency simultaneously. Comprehensive simulation and experimental studies on an all silicon carbide prototype verify the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This article puts forward a hybrid model predictive control (H-MPC) that enables the decoupling of low- and high-frequency stages in a seven-level hybrid multilevel converter (7L-HMC). It first uses the sign pattern of the reference voltage vector to determine switching states of the low-frequency stage. Next, the reference vector is shifted to the internal hexagon of the original space vector diagram, which is thereby converted to a 120° oblique coordinate system, where the adjacent vectors can be rapidly selected. Then, the optimal current tracking is primarily safeguarded by the duty cycle optimization of the three adjacent vectors. Finally, an optimized symmetric switching sequence minimizing the dc voltage deviation over one control iteration is selected through the assessment of possible switching sequences that are subject to the chosen vectors with optimal duty cycles. The proposed H-MPC method can reduce both the current ripple and computational burden while achieving a constant switching frequency. Comprehensive simulation and experimental comparisons on an all-silicon-carbide 7L-HMC prototype verify the effectiveness of the proposed H-MPC. [ABSTRACT FROM AUTHOR]

Although LLC converters are attractive in industrial applications due to its advantages of soft switching, high efficiency, and simple control, in wide voltage gain range applications, large switching frequency operating range is required, which may cause the loss of soft switching operation and existence of control instability issue. In this article, a novel LLC converter with two LLC resonant tanks is proposed. The proposed converter has three operation modes, namely, dual full-bridge operation mode, full-bridge operation mode, and half-bridge operation mode, which can cover the high voltage gain range, medium voltage gain range, and low voltage gain range operations, respectively. The operational principles of the proposed converter are presented, and brief design considerations are discussed. A 250 W experimental prototype with six times input voltage range (50–300 V) was built to validate the theoretical analysis of the proposed converter. Comparisons among different LLC topologies for wide voltage gain range applications are made. [ABSTRACT FROM AUTHOR]

This paper presents functional high-temperature analog circuits in silicon carbide bipolar technology. The circuits will collectively form the analog signal conditioning block for a wireless telemetry system in an extreme environment (above 400°C). The signal conditioning block is composed of a low dc gain operational amplifier, a negative voltage charge pump (CP), an RC oscillator, and a voltage regulator. The circuits are tested up to 450°C. The measured open-loop gain for the amplifier at 450°C is 30 dB. The regulator provides approximately 9-V output at 450°C for a fixed load current of up to 18 mA and an applied reference of 4.5 V. The negative voltage CP requires an oscillating signal at its input, which is provided by the RC cross-coupled oscillator. The CP provides about −5 V at 450°C. [ABSTRACT FROM AUTHOR]

This paper presents a practical strategy for utilizing the submodule (SM) redundancy of a modular multilevel converter (MMC) for its fault tolerance. This strategy provides a systematic framework for balancing the tradeoff between two conventional methods for using the active redundancy and, thus, achieves operational flexibility. One of the existing methods improves SM reliability owing to less voltage stress on the SM components by employing all of the SMs to form the ac or dc voltages (voltage-sharing mode). The other avoids transients by keeping the average SM voltage constant at the cost of slightly increased stress on the SM components (fixed-level mode), which, however, can be controlled to provide the grid-adaptive operation by reserving the energy of the SMs not in service. We, thus, develop a new redundancy management scheme by integrating these two methods and exploiting their technical benefits to meet the PQ requirements and MMC control performance. This research provides a theoretical basis and a technical guide to determining the number of SMs, which can further increase the voltage steps as per the MMC and grid conditions. This paper also connects the remaining PQ capability of the MMC at a particular operating point with the SM redundancy concept by defining a potential redundancy, especially useful when the physical redundancy is exhausted. The theoretical findings and efficacy of the proposed strategy are validated through PSCAD/EMTDC time-domain simulations followed by experiments using a nine-level single-phase MMC system. [ABSTRACT FROM AUTHOR]