Search

Precise detection of low-dose X- and γ-radiations remains a challenge and is particularly important for studying biological effects under low-dose ionizing radiation, safety control in medical radiation treatment, survey of environmental radiation background, and monitoring cosmic radiations. We report here a photoluminescent uranium organic framework, whose photoluminescence intensity can be accurately correlated with the exposure dose of X- or γ-radiations. This allows for precise and instant detection of ionizing radiations down to the level of 10 -4  Gy, representing a significant improvement on the detection limit of approximately two orders of magnitude, compared to other chemical dosimeters reported up to now. The electron paramagnetic resonance analysis suggests that with the exposure to radiations, the carbonyl double bonds break affording oxo-radicals that can be stabilized within the conjugated uranium oxalate-carboxylate sheet. This gives rise to a substantially enhanced equatorial bonding of the uranyl(VI) ions as elucidated by the single-crystal structure of the γ-ray irradiated material, and subsequently leads to a very effective photoluminescence quenching through phonon-assisted relaxation. The quenched sample can be easily recovered by heating, enabling recycled detection for multiple runs., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

The exceptional photophysical properties of 3D organic–inorganic lead halide hybrids (OILHs) endow their significant potential for usage in optoelectronics, which has sparked intense research on novel 3D OILHs and associated applications. However, constructing new 3D OILHs based on large organic cations suffers from tough challenges due to the limitation of the Goldschmidt tolerance factor rule, let alone further explorations of their practical applications. Herein, a brand‐new 3D lead chloride hybrid, (1MPZ)Pb4Cl10·H2O (1, 1MPZ = 1‐methylpiperazine) is reported, featuring a dense 3D lead chloride framework made of the corner‐, edge‐, and face‐shared lead chloride polyhedra. 1 presents a broadband white light emission with a large Stokes shift and a nanosecond photoluminescence lifetime, which originates from radiative recombination of self‐trapped excitons (STEs) induced by the highly distorted structure. Such a reabsorption‐free and fast‐decayed STEs emission coupling with the dense 3D architecture further enables 1 with effective X‐ray scintillation with good sensitivity. Impressively, 1 also shows superior environmental and radiation stability. This study provides a new 3D OILH with appealing luminescence, not only expanding the 3D OILH family but also inspiring the exploitation of their optoelectronic applications. [ABSTRACT FROM AUTHOR]

Herein we report the first example of an actinide polyiodate compound, namely K4[(UO2)2(IO3)6(I4O11)]·(HIO3)4(H2O)6 (UPI-1), which was obtained from slow evaporation of nitric acid with a high I/U ratio. Spectroscopic measurements indicate that UPI-1 possesses X-ray luminescence properties applicable for X-ray scintillation and also exhibits modest protonic conduction. [ABSTRACT FROM AUTHOR]

Semiconductive metal–organic frameworks (MOFs) have emerged in applications such as chemical sensors, electrocatalysts, energy storage materials, and electronic devices. However, examples of semiconductive MOFs within flexible electronics have not been reported. We present flexible X‐ray detectors prepared by thermoplastic dispersal of a semiconductive MOF (SCU‐13) through a commercially available polymer, poly(vinylidene fluoride). The flexible detectors exhibit efficient X‐ray‐to‐electric current conversion with enhanced charge‐carrier mobility and low trap density compared to pelleted devices. A high X‐ray detection sensitivity of 65.86 μCGyair−1 cm−2 was achieved, which outperforms other pelleted devices and commercial flexible X‐ray detectors. We demonstrate that the MOF‐based flexible detectors can be operated at multiple bending angles without a deterioration in detection performance. As a proof‐of‐concept, an X‐ray phase contrast under bending conditions was constructed using a 5×5 pixelated MOF‐based imager. [ABSTRACT FROM AUTHOR]

Scintillators are a unique class of luminescent materials with specific applications towards radiation detection. The emitters within state‐of‐the‐art scintillators are mostly limited to bismuth, cerium, europium, thallium, lead, tungsten, etc. A shared feature of these elements is the relatively high atomic number, which is responsible for high radiation stopping power and radiation‐induced luminescence. Searching for new scintillating materials is an essential target aiming at specific applications. In this Concept article, we will discuss our recent works on the topic of "uranyl‐bearing scintillators". As a virgin territory in this field, uranyl‐bearing scintillators show intrinsic merits for designing new materials with X‐ray detection capability, that is, the large photoelectric cross‐section, high X‐ray attenuation efficiency, and high crystal density. In addition, we also present challenges in the further development of the uranyl‐bearing scintillators. [ABSTRACT FROM AUTHOR]

For the first time, we report intense X-ray scintillation enabled by a series of isotypic lanthanide (Eu and Tb) based metal–organic frameworks, initially showing a very efficient X-ray to visible light luminescence conversion. By systematic adjusting of the molar ratio of Eu3+ and Tb3+ in the same MOF structure as a traditional strategy for color-tuning in lanthanide-based photoluminescent materials, linear multicolor visualization of X-ray radiation from red to green can be facilely achieved, providing a new class of scintillating materials with continuous color tunability that can be customized for desired purposes. Moreover, these lanthanide–organic framework based scintillators exhibit excellent radiation resistance and humidity stability, in comparison with the state of the art and commercially-available X-ray scintillator, CsI:Tl. [ABSTRACT FROM AUTHOR]

Flexible X-Ray Detector, Lanthanide Chalcogenide Scintillator, Luminescence, X-Ray Imaging Keywords: Flexible X-Ray Detector; Lanthanide Chalcogenide Scintillator; Luminescence; X-Ray Imaging EN Flexible X-Ray Detector Lanthanide Chalcogenide Scintillator Luminescence X-Ray Imaging 1 1 1 08/10/23 20230814 NES 230814 B Scintillators b . Frontispiece: Emergence of a Lanthanide Chalcogenide as an Ideal Scintillator for a Flexible X-ray Detector. [Extracted from the article]

Abstract: The combination of high atomic number and high oxidation state in UVI materials gives rise to both high X‐ray attenuation efficiency and intense green luminescence originating from ligand‐to‐metal charge transfer. These two features suggest that UVI materials might act as superior X‐ray scintillators, but this postulate has remained substantially untested. Now the first observation of intense X‐ray scintillation in a uranyl–organic framework (SCU‐9) that is observable by the naked eye is reported. Combining the advantage in minimizing the non‐radiative relaxation during the X‐ray excitation process over those of inorganic salts of uranium, SCU‐9 exhibits a very efficient X‐ray to green light luminescence conversion. The luminescence intensity shows an essentially linear correlation with the received X‐ray intensity, and is comparable with that of commercially available CsI:Tl. SCU‐9 possesses an improved X‐ray attenuation efficiency (E>20 keV) as well as enhanced radiation resistance and decreased hygroscopy compared to CsI:Tl. [ABSTRACT FROM AUTHOR]

Keywords: luminescence; radiation detection; scintillators; uranium As a new area in this field, uranyl-bearing scintillators show intrinsic merits for designing new materials with X-ray detection capability, that is, a large photoelectric cross-section, high X-ray attenuation efficiency, and high crystal density. Luminescence, radiation detection, scintillators, uranium. [Extracted from the article]