Search

This paper proposes a novel consequent‐pole dual‐stator linear permanent magnet vernier machine (DS‐LPMVM) with PM in the mover slot opening, which has a bi‐directional flux modulation effect. The novelty of the proposed machine consists of consequent‐pole double‐sided topology with toroidal windings placed in the mover slot, as well as PMs both on the stator and mover slot to improve the air gap magnetic field. The dual‐stator adopts misalignment structure to suppress detent force and produce steady thrust. The electromagnetic parameters of the proposed DS‐LPMVM are evaluated and quantitatively compared with the conventional linear permanent magnet vernier machine (C‐LPMVM) in terms of air‐gap flux density, no‐load back EMF, inductance, and thrust. The geometrical parameters are designed to reduce the detent force. By analyzing the optimized structure parameters of the two machines, the good electromagnetic performances of the proposed machine are verified by the finite element method (FEM) and semi‐analytical method, and both results of the two methods are basically the same. It is found that the amount of PMs for the proposed machine is reduced by 20% compared to the C‐LPMVM, but the average thrust is increased by 20.7% and the thrust ripple is reduced to 4.04%. The results show that the proposed DS‐LPMVM has better flux modulation effect and thrust characteristics than C‐LPMCM. Finally, a 12‐slot, 10‐pole pairs prototype was manufactured and tested. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Cogging torque can affect the performance of permanent magnet (PM) homopolar inductor machines (HIMs). In order to find the reduction methods of the PM HIM cogging torque, it is necessary to investigate its production mechanism and analytical model. In this paper, the production mechanism of the PM HIM cogging torque is revealed from the perspective of air‐gap field modulation principle. It is found that the air‐gap permeance of PM HIMs can modulate their air‐gap magneto‐motive force (MMF) and then a large number of modulated air‐gap magnetic fields are generated. These magnetic fields with identical production condition but different rotation speeds or rotation directions can interact with each other, hence the production of the PM HIM cogging torque. By the combination of energy method and air‐gap field modulation principle, the cogging torque analytical model of PM HIMs is derived. Based on the obtained analytical model, the methods for reducing the PM HIM cogging torque are further analyzed. Finally, a 48‐slot/4‐pole (48S4P) PM HIM is designed and exampled. The air‐gap flux density of the 48S4P PM HIM is simulated by three‐dimensional (3‐D) finite element analysis (FEA). Based on the harmonic analysis for the simulated results, the correctness of the proposed cogging torque production mechanism is validated. In addition, a prototype of the 48S4P PM HIM is manufactured. The cogging torque in the prototype is obtained by the analytical model, 3‐D FEA and experiments, respectively. The simulation and measurement results verify the correctness of the cogging torque analytical model. © 2023 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Abstract in order to study the torque ripple of permanent magnet synchronous motor for electric vehicle, the method of modular poles instead of single pole is adopted to reduce the torque ripple. The modular poles consist of three kinds of permanent magnets with different remanence and are arranged in a sinusoidal distribution. The pole arc length and position of each magnetic pole are calculated according to the cutting area of sinusoidal air gap flux density wave. By changing the cutting area of sinusoidal air gap flux density wave, the optimal pole arc coefficient of each permanent magnet was determined, and the magnet pole combination with the smallest torque ripple value is obtained. The results show that the sine degree of back electromotive force is improved obviously, the cogging torque is decreased greatly, and the motor with modular poles has obvious effect on torque ripple suppression. The torque of the motor with different kinds of magnetic pole combination is more stable than that of the motor with the same kind of magnetic pole combination. In this paper, the method of using modular poles instead of single pole to reduce torque ripple is of positive significance, which provides a reference for the subsequent performance optimization of electric vehicle motor. © 2023 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Submersible motors are widely used in industry, agriculture, and life. Despite their safety and efficiency, submersible motors suffer from a harsh working environment. Overheating and overload may cause seal damage to make sediment flood in, which will lead to bearing faults. Meanwhile, due to the particularity of the working environment of submersible motors, the traditional method of detecting bearing faults through vibration signals is challenging to implement. In this paper, a numerical model based on the eccentricity analysis method is proposed to simulate the bearing faults process of submersible induction motors so that electrical signals, including air gap flux density and exciting force, could be obtained to diagnose the bearing faults. The proposed approach is capable of approximately simulating the motion orbit of the rotor origin when a single point fault occurs. Then, the 2D Fourier decomposition method is used to analyze the influence of rotor deflection on air gap flux density and exciting electromagnetic force from order and frequency. Finally, the proposed model is tested and proved efficient by analyzing the emerging fault harmonic components. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

The double‐sided permanent magnet linear synchronous motor (DS‐PMLSM) is widely used in the industrial field with high precision and long strokes due to simple construction, high instantaneous thrust and high controllability. However, parasitic issues, such as unavoidable manufacturing tolerances, might cause the symmetrical position deviation of primary or secondary components, which results in an asymmetrical air‐gap between components, affecting the motor's electromagnetic characteristics further. In this paper, it is taken into account secondary torsional or offset conditions (the secondary component is displaced sideways from a symmetrical position), and investigates the variations of electromagnetic characteristics on the 12‐solt 14‐pole short‐primary DS‐PMLSM. Based on the finite element method (FEM), the effects of secondary torsion or offset on the air‐gap flux density, the back‐EMF, the detent force, the thrust force, and the normal force are investigated and compared respectively. In addition, the analytical results of the back‐EMF considering lower secondary torsion are verified on a lower secondary torsional prototype. From the analytical results of electromagnetic characteristics, it is revealed that with the torsional angle or offset distance rising, the normal force and detent force in the Y‐axis gradually increase, while the thrust force and the back‐EMF decrease. These theoretical researches can play an important role in the operation and assembly process of the DS‐PMLSM. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

According to the air‐gap flux density (AGFD) and the thickness of the permanent magnet (PM) in the direction of magnetization, this paper proposes a modified analytical model for the sine pole‐shaping surface‐mounted permanent magnet motor (SPMM) under parallel magnetization. The construction of the model also involves the Carter coefficient formula, the principle of magnetic‐circuit equivalence, and the distributed magnetic‐circuit method, which are used to deal with such influential factors as stator slotting, interpolar magnetic leakage, edge effect, and magnetic‐circuit saturation. Then, a finite‐element model is established to verify the analytical model through simulation. The results show that the fundamental amplitude of AGFD of the modified sine pole‐shaping motor is respectively 6.4 and 0.15% higher than that of the simplified sine pole‐shaping motor and the eccentric pole‐shaping motor, and that the total harmonic distortion of AGFD the former is respectively 67.2 and 11.1% lower than that of the latter, thereby causing an increase in average torque of the sine pole‐shaping motor and a decrease in its radial electromagnetic harmonics and torque ripple. Experiments show that both the modified analytical and finite‐element model are accurate. And, the proposed analytical model which does not need ergodic scanning as the eccentric pole‐shaping method can further optimize the electromagnetic performance of the motor. It can not only improve the motor design but also provide reference for the optimal design of high‐quality PM motors. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

The accurate estimation of the zigzag leakage flux losses (ZZLFL) caused by the slot harmonics and their interactions, which occupy a high proportion of stray losses, are of great significance in the efficiency calculation as well as the optimization design for the wet submersible induction machine (WSIM). In this paper, a two‐dimensional finite element method (FEM) is presented to separate ZZLFL into the iron losses and the eddy‐current losses. The air‐gap magnetic flux density is decomposed by the two‐dimensional fast Fourier transform at a sampling frequency of 5000 Hz. The hybrid excited virtual permanent magnet harmonic machine model is applied to reconstruct the air‐gap magnetic field and excite the stator and rotor separately. Each node harmonic iron losses are acquired through the modified Bertotti iron losses model with the consideration of high‐frequency power losses as a function of the magnetic flux density. The zigzag flux losses provided by different harmonics are obtained by subtracting the hybrid excitation losses. According to the different proportions of harmonic losses among zigzag flux losses, novel WSIM models are proposed in the paper to decrease zigzag flux losses and increase the efficiency. Adopting the same computation process, the novel models with different structures are explored and verified to improve the zigzag flux losses and power density. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Halbach array has been more frequently used in the field of electromagnetism in recent days because of some unique advantages such as the self‐shielding and sinusoidal field distribution. In order to reduce the impact of the high order harmonic content of the air‐gap flux density of the interior permanent magnet synchronous motor (IPMSM) on the performance of the machine, a new non‐uniform Halbach array structure is proposed in this paper. Firstly, an equivalent analytical model is established to analyze the influence on the air‐gap flux density. At the same time, the interior permanent magnet synchronous motor model is built by using the finite element analysis. Then, the relationship between the air‐gap flux density and the four design parameters (the thickness of the permanent magnet, the magnetization angle, the angle of the permanent magnet, and the proportion of auxiliary magnetic poles) is analyzed by using the Taguchi method orthogonal experiment. The total harmonic distortion (THD) of air‐gap magnetic fields and its fundamental harmonic amplitude are employed as the evaluation criteria. Finally, the effectiveness of this optimization method is verified by comparing the harmonic content of the air‐gap flux density before and after the optimization. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Broken rotor bar (BRB) fault may cause deterioration of motor performance and interfere with normal production. Accurate detection of BRB fault is helpful in arranging overhaul and replacing equipment in advance. According to the theory of magnetic potential balance, the variation rule of the air‐gap flux density of the squirrel‐cage induction motor (IM) before and after the BRB fault is deduced in this paper. A large‐size measuring coil is embedded inside one stator slot wedge, and BRB fault is diagnosed by combining the time‐domain and frequency‐domain characteristics of the induced voltage of the measuring coil. In the stage of validity verification, a 200 kW and a 7.5 kW squirrel‐cage IM are selected to complete the finite element simulation and fault‐simulation experiments, respectively. Compared with the traditional motor current signal analysis method, the detection performance of BRB fault under different load levels is verified, which provides a new solution for the fault diagnosis of BRB fault of the squirrel‐cage IM. © 2019 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. [ABSTRACT FROM AUTHOR]

To obtain the larger output torque and the higher stability speed accuracy, a novel dual‐magnet brushless DC motor is proposed, and its structure is introduced. The mathematical model is established by the equivalent surface current method, and the magnetic circuit is analyzed by finite element method. The radial and tangential air gap magnetic flux densities of the dual‐magnet scheme are larger and less than that of the ironless stator and the Halbach array schemes, respectively. The theoretical calculation and simulation results are verified by prototype experiments. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]