Search

In this study, the WRF-Chem v4.4 model was utilized to evaluate the sensitivity of O 3 simulations with three bottom-up emission inventories (EDGAR-HTAP v2 and v3 and KORUS v5) using surface and aircraft data in East Asia during the Korea-United States Air Quality (KORUS-AQ) campaign period in 2016. All emission inventories were found to reproduce the diurnal variations of O 3 and its main precursor NO 2 as compared to the surface monitor data. However, the spatial distributions of the daily maximum 8 h average (MDA8) O 3 in the model do not completely align with the observations. The model MDA8 O 3 had a negative (positive) bias north (south) of 30° N over China. All simulations underestimated the observed CO by 50 %–60 % over China and South Korea. In the Seoul Metropolitan Area (SMA), EDGAR-HTAP v2 and v3 and KORUS v5 simulated the vertical shapes and diurnal patterns of O 3 and other precursors effectively, but the model underestimated the observed O 3 , CO, and HCHO concentrations. Notably, the model aromatic volatile organic compounds (VOCs) were significantly underestimated with the three bottom-up emission inventories, although the KORUS v5 shows improvements. The model isoprene estimations had a positive bias relative to the observations, suggesting that the Model of Emissions of Gases and Aerosols from Nature (MEGAN) version 2.04 overestimated isoprene emissions. Additional model simulations were conducted by doubling CO and VOC emissions over China and South Korea to investigate the causes of the model O 3 biases and the effects of the long-range transport on the O 3 over South Korea. The doubled CO and VOC emission simulations improved the model O 3 simulations for the local-emission-dominant case but led to the model O 3 overestimations for the transport-dominant case, which emphasizes the need for accurate representations of the local VOC emissions over South Korea. [ABSTRACT FROM AUTHOR]

In this study, the WRF-Chem v4.4 model was utilized to evaluate three bottom-up emission inventories (EDGAR-HTAP v2, v3, and KORUS v5) using surface and aircraft data in East Asia during the Korea-United States Air Quality (KORUS-AQ) campaign period in 2016. All emission inventories were found to reproduce the diurnal variations of O3 and NO2 as compared to the surface monitor data. However, the spatial distributions of the daily maximum 8-hour average (MDA8) O3 in the model do not completely align with the observations. The model MDA8 O3 had a negative (positive) bias north (south) of 30°N over China. All simulations underestimated the observed CO by 50-60% over China and South Korea. In the Seoul Metropolitan Area (SMA), EDGAR-HTAP v2, v3, and KORUS v5 simulated the vertical shapes and diurnal patterns of O3 and other precursors effectively, but the model underestimated the observed O3, CO and HCHO concentrations. Notably, the model aromatic VOCs were significantly underestimated with the three bottom-up emission inventories, although the KORUS v5 shows improvements. The model isoprene estimations had a positive bias relative to the observations, suggesting that the Model of Emissions of Gases and Aerosols from Nature (MEGAN) version 2.04 overestimated isoprene emissions. Additional model simulations were conducted by doubling CO and VOC emissions over China and South Korea to investigate the causes of the model O3 biases and the effects of the long-range transport on the O3 over South Korea. The doubled CO and VOC emission simulations improved the model O3 simulations for the local emission dominant case, but led to the model O3 overestimations for the transport dominant case, which emphasizes the need for accurate representations of the local VOC emissions over South Korea. [ABSTRACT FROM AUTHOR]

Model intercomparison studies often report a large spread in simulation results, but quantifying the causes of these differences is hindered by the fact that several processes contribute to the model spread simultaneously. Here we use the Multi‐Scale Infrastructure for Chemistry and Aerosols (MUSICA) version 0 to investigate the model resolution dependencies of simulated chemical species, with a focus on the differences between global uniform grid and regional refinement grid simulations with the same modeling framework. We construct two global (ne30 [∼112 km] and ne60 [∼56 km]) and two regional refinement grids over Korea (ne30x8 [∼14 km] and ne30x16 [∼7 km]). The grid resolution can change chemical concentrations by an order of magnitude in the boundary layer, and the importance increases as the species' reactivity increases (e.g., up to 50% and 1,000% changes for ethane and xylenes, respectively). The diurnal cycle of oxidants (OH, O3, and NO3) also varies with the grid resolution, which leads to different oxidation pathways of volatile organic compounds (e.g., the fraction of monoterpenes reacting with NO3 in Seoul around midnight is 90% for ne30, but 65% for ne30x16). The models with high‐resolution grids usually do a better job at reproducing aircraft observations during the KORUS‐AQ campaign, but not always, implying compensating errors in the coarse grid simulations. For example, ozone is better reproduced by the coarse grid due to the artificial mixing of NOx. When developing new chemical mechanisms and evaluating models over urban areas, the uncertainties associated with model resolution should be considered. Plain Language Summary: A new model framework, the Multi‐Scale Infrastructure for Chemistry and Aerosols version 0 (MUSICAv0), has been developed at NCAR to enable a computationally feasible global modeling framework while still resolving chemistry at urban scales. Using the MUSICAv0 framework with different horizontal grid resolutions (∼112, ∼56, ∼14, and ∼7 km), this work examines how much horizontal grid resolution can affect simulated chemical concentrations in 3D chemistry models. Model concentrations can vary up to 10 times between ∼112 and ∼7 km grids over urban areas at the surface. On the other hand, a region‐specific emission inventory with detailed local information is essential for some chemical species, although it is generally less important than the grid resolution for many chemical species. The model with a high‐resolution grid better reproduces observations in general, but in some cases compensating errors result in better comparisons for the coarse grid. This work suggests that the effects of grid resolution should not be ignored when evaluating new chemical mechanisms and chemistry models in future studies, and high grid resolution in 3D models is needed to simulate air pollutants over urban and downwind regions. Key Points: The dependence of simulated chemical species on model resolution is quantified in a single modeling frameworkModel evaluations can be substantially affected by grid resolution, especially for urban surface and aircraft measurements at low altitudesGrid resolution strongly impacts the oxidation of volatile organic compounds through differences in diurnal variation of oxidants [ABSTRACT FROM AUTHOR]

High levels of fine particulate matter (PM2.5) pollution in East Asia often exceed local air quality standards. Observations from the Korea–United States Air Quality (KORUS-AQ) field campaign in May and June 2016 showed that development of extreme pollution (haze) occurred through a combination of long-range transport and favorable meteorological conditions that enhanced local production of PM2.5. Atmospheric models often have difficulty simulating PM2.5 chemical composition during haze, which is of concern for the development of successful control measures. We use observations from KORUS-AQ to examine the ability of the GEOS-Chem chemical transport model to simulate PM2.5 composition throughout the campaign and identify the mechanisms driving the pollution event. At the surface, the model underestimates sulfate by - 64 % but overestimates nitrate by + 36 %. The largest underestimate in sulfate occurs during the pollution event, for which models typically struggle to generate elevated sulfate concentrations due to missing heterogeneous chemistry in aerosol liquid water in the polluted boundary layer. Hourly surface observations show that the model nitrate bias is driven by an overestimation of the nighttime peak. In the model, nitrate formation is limited by the supply of nitric acid, which is biased by + 100 % against aircraft observations. We hypothesize that this is due to a large missing sink, which we implement here as a factor of 5 increase in dry deposition. We show that the resulting increased deposition velocity is consistent with observations of total nitrate as a function of photochemical age. The model does not account for factors such as the urban heat island effect or the heterogeneity of the built-up urban landscape, resulting in insufficient model turbulence and surface area over the study area that likely results in insufficient dry deposition. Other species such as NH3 could be similarly affected but were not measured during the campaign. Nighttime production of nitrate is driven by NO2 hydrolysis in the model, while observations show that unexpectedly elevated nighttime ozone (not present in the model) should result in N2O5 hydrolysis as the primary pathway. The model is unable to represent nighttime ozone due to an overly rapid collapse of the afternoon mixed layer and excessive titration by NO. We attribute this to missing nighttime heating driving deeper nocturnal mixing that would be expected to occur in a city like Seoul. This urban heating is not considered in air quality models run at large enough scales to treat both local chemistry and long-range transport. Key model failures in simulating nitrate, mainly overestimated daytime nitric acid, incorrect representation of nighttime chemistry, and an overly shallow and insufficiently turbulent nighttime mixed layer, exacerbate the model's inability to simulate the buildup of PM2.5 during haze pollution. To address the underestimate in sulfate most evident during the haze event, heterogeneous aerosol uptake of SO2 is added to the model, which previously only considered aqueous production of sulfate from SO2 in cloud water. Implementing a simple parameterization of this chemistry improves the model abundance of sulfate but degrades the SO2 simulation, implying that emissions are underestimated. We find that improving model simulations of sulfate has direct relevance to determining local vs. transboundary contributions to PM2.5. During the haze pollution event, the inclusion of heterogeneous aerosol uptake of SO2 decreases the fraction of PM2.5 attributable to long-range transport from 66 % to 54 %. Locally produced sulfate increased from 1 % to 25 % of locally produced PM2.5 , implying that local emissions controls could have a larger effect than previously thought. However, this additional uptake of SO2 is coupled to the model nitrate prediction, which affects the aerosol liquid water abundance and chemistry driving sulfate–nitrate–ammonium partitioning. An additional simulation of the haze pollution with heterogeneous uptake of SO2 to aerosol and simple improvements to the model nitrate simulation results in 30 % less sulfate due to 40 % less nitrate and aerosol water, and this results in an underestimate of sulfate during the haze event. Future studies need to better consider the impact of model physical processes such as dry deposition and nighttime boundary layer mixing on the simulation of nitrate and the effect of improved nitrate simulations on the overall simulation of secondary inorganic aerosol (sulfate + nitrate + ammonium) in East Asia. Foreign emissions are rapidly changing, increasing the need to understand the impact of local emissions on PM2.5 in South Korea to ensure continued air quality improvements. [ABSTRACT FROM AUTHOR]

Global coupled chemistry–climate models underestimate carbon monoxide (CO) in the Northern Hemisphere, exhibiting a pervasive negative bias against measurements peaking in late winter and early spring. While this bias has been commonly attributed to underestimation of direct anthropogenic and biomass burning emissions, chemical production and loss via OH reaction from emissions of anthropogenic and biogenic volatile organic compounds (VOCs) play an important role. Here we investigate the reasons for this underestimation using aircraft measurements taken in May and June 2016 from the Korea–United States Air Quality (KORUS-AQ) experiment in South Korea and the Air Chemistry Research in Asia (ARIAs) in the North China Plain (NCP). For reference, multispectral CO retrievals (V8J) from the Measurements of Pollution in the Troposphere (MOPITT) are jointly assimilated with meteorological observations using an ensemble adjustment Kalman filter (EAKF) within the global Community Atmosphere Model with Chemistry (CAM-Chem) and the Data Assimilation Research Testbed (DART). With regard to KORUS-AQ data, CO is underestimated by 42 % in the control run and by 12 % with the MOPITT assimilation run. The inversion suggests an underestimation of anthropogenic CO sources in many regions, by up to 80 % for northern China, with large increments over the Liaoning Province and the North China Plain (NCP). Yet, an often-overlooked aspect of these inversions is that correcting the underestimation in anthropogenic CO emissions also improves the comparison with observational O 3 datasets and observationally constrained box model simulations of OH and HO 2. Running a CAM-Chem simulation with the updated emissions of anthropogenic CO reduces the bias by 29 % for CO, 18 % for ozone, 11 % for HO 2 , and 27 % for OH. Longer-lived anthropogenic VOCs whose model errors are correlated with CO are also improved, while short-lived VOCs, including formaldehyde, are difficult to constrain solely by assimilating satellite retrievals of CO. During an anticyclonic episode, better simulation of O 3 , with an average underestimation of 5.5 ppbv, and a reduction in the bias of surface formaldehyde and oxygenated VOCs can be achieved by separately increasing by a factor of 2 the modeled biogenic emissions for the plant functional types found in Korea. Results also suggest that controlling VOC and CO emissions, in addition to widespread NO x controls, can improve ozone pollution over East Asia. [ABSTRACT FROM AUTHOR]

South Korea routinely experiences poor air quality with ozone and small particles exceeding air quality standards. To build a better understanding of this problem, in 2016, the KORea-United States cooperative Air Quality (KORUS-AQ) study collected surface and airborne measurements of many chemical species, including the reactive gases hydroxyl (OH) and hydroperpoxyl (HO 2). Several different results are reported here. First, OH and HO 2 measured on the NASA DC-8 agree to within uncertainties with values calculated by two different box models, both in statistical comparisons and as a function of altitude from the surface to 8 km. These comparisons show substantial scatter, likely due to both variability in instrument performance and the difficulty in interpolating measurements made with frequencies different from those of the model time step. Second, OH and HO 2 calculated by a model including HO 2 uptake on aerosol particles in the chemical mechanism are inconsistent with observations. Third, in the planetary boundary layer over both ocean and land, measured and model-calculated OH reactivity are sometimes different, and this missing OH reactivity, which is as much as ∼4 s−1, increased from April to June and originated primarily from the Korean peninsula. Fourth, repeated missed approaches at the Seoul Air Base during several days show that the changes in the sum of ozone and nitrogen dioxide are consistent with ozone production rates calculated from HO 2 either observed or modeled by the Langley Research Center model. • For South Korea, observed and modeled OH and HO 2 agree to within uncertainties. • Modeled aerosol uptake of hydroperoxyl is inconsistent with observed hydroperoxyl. • Missing OH reactivity came from Korea and increased from spring to summer. • Observed ozone changes are consistent with calculated ozone production. [ABSTRACT FROM AUTHOR]