Search

Abstract Background Auriculocondylar syndrome (ARCND) is an extremely rare autosomal dominant or recessive condition that typically manifests as question mark ears (QMEs), mandibular condyle hypoplasia, and micrognathia. Severe dental and maxillofacial malformations present considerable challenges in patients’ lives and clinical treatment. Currently, only a few ARCND cases have been reported worldwide, but most of them are related to genetic mutations, clinical symptoms, and ear correction; there are few reports concerning the treatment of dentofacial deformities. Case presentation Here, we report a rare case of ARCND in a Chinese family. A novel insertional mutation in the guanine nucleotide-binding protein alpha-inhibiting activity polypeptide 3 (GNAI3) was identified in the patient and their brother using whole-exome sequencing. After a multidisciplinary consultation and examination, sequential orthodontic treatment and craniofacial surgery, including distraction osteogenesis and orthognathic surgery, were performed using three-dimensional (3D) digital technology to treat the patient’s dentofacial deformity. A good prognosis was achieved at the 5-year follow-up, and the patient returned to normal life. Conclusions ARCND is a monogenic and rare condition that can be diagnosed based on its clinical triad of core features. Molecular diagnosis plays a crucial role in the diagnosis of patients with inconspicuous clinical features. We present a novel insertion variation in GNAI3, which was identified in exon 2 of chromosome 110116384 in a Chinese family. Sequential therapy with preoperative orthodontic treatment combined with distraction osteogenesis and orthognathic surgery guided by 3D digital technology may be a practical and effective method for treating ARCND.

Metal organic frameworks(MOFs),as non-homogeneous Fenton oxidation catalysts,are difficult to be utilized multiple times and prone to secondary pollution in the treatment of printing and dyeing wastewater. To solve this problem, metal organic framework polypropylene melt blown composites (TA-APTES@MOF@PP) were prepared by modifying the surface of polypropylene melt blown nonwoven (PP) with polyphenol heterogeneous network coating, which resulted in excellent adhesion and secondary reactivity,and by in situ growth of MIL-88B (Fe) crystals on its surface. The catalytic degradation effect and recycling performance of the composites were tested with methylene blue dye (MB) as the target pollutant,and the catalyst delivery ratio and optimal reaction conditions were determined by single-factor optimization. The results showed that the degradation of MB by TA-APTES@MOF@PP (MOF 20 mg) under dark conditions was optimal at 3 h with a degradation rate of 95.3% when the pH of dye solution was 3 and the H2O2 concentration was 50 mmol/L. The composite material has no secondary pollution,easy to recycle, good stability, acid and alkali resistance, catalytic effect in the pH range of 2-11 of dying solution, and the 3 h degradation rate was still above 73.4% after 5 cycles. The composite material had a broad application prospect in printing and dyeing wastewater treatment and water environment management.

Abstract Current assessment methods for diabetic foot ulcers (DFUs) lack objectivity and consistency, posing a significant risk to diabetes patients, including the potential for amputations, highlighting the urgent need for improved diagnostic tools and care standards in the field. To address this issue, the objective of this study was to develop and evaluate the Smart Diabetic Foot Ulcer Scoring System, ScoreDFUNet, which incorporates artificial intelligence (AI) and image analysis techniques, aiming to enhance the precision and consistency of diabetic foot ulcer assessment. ScoreDFUNet demonstrates precise categorization of DFU images into “ulcer,” “infection,” “normal,” and “gangrene” areas, achieving a noteworthy accuracy rate of 95.34% on the test set, with elevated levels of precision, recall, and F1 scores. Comparative evaluations with dermatologists affirm that our algorithm consistently surpasses the performance of junior and mid-level dermatologists, closely matching the assessments of senior dermatologists, and rigorous analyses including Bland–Altman plots and significance testing validate the robustness and reliability of our algorithm. This innovative AI system presents a valuable tool for healthcare professionals and can significantly improve the care standards in the field of diabetic foot ulcer assessment.

Abstract Background Sublobar resection for ground-glass opacity became a recommend surgery choice supported by the JCOG0804/JCOG0802/JCOG1211 results. Sublobar resection includes segmentectomy and wedge resection, wedge resection is suitable for non-invasive lesions, but in clinical practice, when pathologists are uncertain about the intraoperative frozen diagnosis of invasive lesions, difficulty in choosing the appropriate operation occurs. The purpose of this study was to analyze how to select invasive lesions with clinic-pathological characters. Methods A retrospective study was conducted on 134 cases of pulmonary nodules diagnosed with minimally invasive adenocarcinoma by intraoperative freezing examination. The patients were divided into two groups according to intraoperative frozen results: the minimally invasive adenocarcinoma group and the at least minimally invasive adenocarcinoma group. A variety of clinical features were collected. Chi-square tests and multiple regression logistic analysis were used to screen out independent risk factors related to pathological upstage, and then ROC curves were established. In addition, an independent validation set included 1164 cases was collected. Results Independent risk factors related to pathological upstage were CT value, maximum tumor diameter, and frozen result of AL-MIA. The AUC of diagnostic mode was 71.1% [95%CI: 60.8-81.3%]. The independent validation included 1164 patients, 417 (35.8%) patients had paraffin-based pathology of invasive adenocarcinoma. The AUC of diagnostic mode was 75.7% [95%CI: 72.9-78.4%]. Conclusions The intraoperative frozen diagnosis was AL-MIA, maximum tumor diameter larger than 15 mm and CT value is more than − 450Hu, highly suggesting that the lung GGO was invasive adenocarcinoma which represent a higher risk to recurrence. For these patients, sublobectomy would be insufficient, lobectomy or complementary treatment is encouraged.

Abstract Purpose To investigate the relationship between multi-dimensional aspects of screen exposure and autistic symptoms, as well as neuropsychological development in children with ASD. Methods We compared the ScreenQ and Griffiths Development Scales-Chinese Language Edition (GDS-C) of 636 ASD children (40.79 ± 11.45 months) and 43 typically developing (TD) children (42.44 ± 9.61 months). Then, we analyzed the correlations between ScreenQ and Childhood Autism Rating Scale (CARS), and GDS-C. We further used linear regression model to analyze the risk factors associated with high CARS total scores and low development quotients (DQs) in children with ASD. Results The CARS of children with ASD was positively correlated with the ScreenQ total scores and “access, frequency, co-viewing” items of ScreenQ. The personal social skills DQ was negatively correlated with the “access, frequency, content, co-viewing and total scores” of ScreenQ. The hearing-speech DQ was negatively correlated with the “frequency, content, co-viewing and total scores” of ScreenQ. The eye-hand coordination DQ was negatively correlated with the “frequency and total scores” of ScreenQ. The performance DQ was negatively correlated with the “frequency” item of ScreenQ. Conclusion ScreenQ can be used in the study of screen exposure in children with ASD. The higher the ScreenQ scores, the more severe the autistic symptoms tend to be, and the more delayed the development of children with ASD in the domains of personal-social, hearing-speech and eye-hand coordination. In addition, “frequency” has the greatest impact on the domains of personal social skills, hearing-speech, eye-hand coordination and performance of children with ASD.

INTRODUCTION: Withdrawal of nucleos(t)ide analog therapy is increasingly being evaluated in chronic hepatitis B infection as a strategy to induce hepatitis B surface antigen (HBsAg) loss. The Hepatitis B Research Network Immune-Active Trial evaluated treatment with tenofovir (TDF) for 4 years ± an initial 6 months of peginterferon-α (PegIFN) (NCT01369212) after which treatment was withdrawn. METHODS: Eligible participants (hepatitis B e antigen [HBeAg]-/anti-HBe+, hepatitis B virus [HBV] DNA 5× upper limit of normal) after TDF withdrawal occurred in 36 (37.1%) participants and occurred more frequently and earlier in those HBeAg- compared with HBeAg+ at treatment initiation. ALT flares were associated with older age and higher HBV DNA pretreatment and at the visit before the flare. ALT flares were not significantly associated with HBsAg decline or loss but were associated with immune active disease at 1 year (70.6% vs 11.9%, P < 0.0001) and 2 years (66.7% vs 25.9%, P = 0.03) postwithdrawal. Treatment reinitiation was required in 13 (13.4%) participants, and 13 others remained in a sustained inactive carrier state by the end of the study follow-up. No criteria reliably predicted safe treatment withdrawal. DISCUSSION: Results from this trial do not support TDF withdrawal as a therapeutic strategy. HBsAg loss was infrequent within 2 years of stopping long-term TDF. If withdrawal is considered, HBV DNA should be carefully monitored with reinitiation of therapy if levels rise above 4 log 10 IU/mL to reduce the risk of ALT flares, as they were not associated with subsequent HBsAg decline or loss.

Abstract Background Recently, studies on behavioral interventions for autism have gained popularity. Naturalistic Developmental Behavior Interventions (NDBIs) are among the most effective, evidence-based, and widely used behavior interventions for autism. However, no research has been conducted on which of the several NDBI methods is most effective for parents and children with autism spectrum disorders. Therefore, we conducted a network meta-analysis to compare the specific effects of each type of parental-mediated NDBI on children’s developmental skills and parent fidelity. Methods PubMed, Embase, Cochrane Library, Medline, Web of Science, China National Knowledge Infrastructure (CNKI), CINAHL, and Wanfang databases were searched from inception to August 30, 2023. A total of 32 randomized controlled trial studies that examined the efficacy of different NDBIs were included. Results Parents of children with ASD who received Pivotal Response Treatment (PRT) reported significant improvements in their children’s social skills (SUCRA, 74.1%), language skills (SUCRA, 88.3%), and parenting fidelity (SUCRA, 99.5%). Moreover, parents who received Early Start Denver Model (ESDM) reported significant improvements in their children’s language (SMD = 0.41, 95% CI: 0.04, 0.79) and motor skills (SMD = 0.44, 95% CI: 0.09, 0.79). In terms of the efficacy of improving parent fidelity, the results showed that the Improving Parents as Communication Teachers (ImPACT) intervention significantly improved parent fidelity when compared with the treatment-as-usual group (TAU) (SMD = 0.90, 95% CI: 0.39, 1.42) and the parental education intervention (PEI) (SMD = 1.10, 95% CI:0.28, 1.91).There was a difference in parent fidelity among parents who received PRT(SMD = 3.53, 95% CI: 2.26, 4.79) or ESDM(SMD = 1.42, 95% CI: 0.76, 2.09) training compared with PEI. Conclusion In conclusion, this study revealed that parents can achieve high fidelity with the ImPACT intervention, and it can serve as an early first step for children newly diagnosed with ASD. It also showed that parent-mediated ESDM is effective in improving language and motor skills for children with ASD and can be used as part of the second stage of parent training. Parent-mediated PRT can also be used as a third stage of parent training with sufficient training intensity to further improve language, social, and motor skills.

Abstract Background Early-onset bone dysplasia is a common manifestation of hypophosphatasia (HPP), an autosomal inherited disease caused by ALPL mutation. ALPL ablation induces prototypical premature bone ageing characteristics, resulting in impaired osteogenic differentiation capacity of human bone marrow mesenchymal stem cells (hBMMSCs). As angiogenesis is tightly coupled with osteogenesis, it also plays a necessary role in sustaining bone homeostasis. We have previously observed a decrease in expression of angiogenesis marker gene CD31 in the metaphysis of long bone in Alpl +/− mice. However, the role of ALPL in regulation of angiogenesis in bone has remained largely unknown. Methods Exosomes derived from Normal and HPP hBMMSCs were isolated and identified by ultracentrifugation, transmission electron microscopy, and nanoparticle size measurement. The effects of ALPL on the angiogenic capacity of hBMMSCs from HPP patients were assessed by immunofluorescence, tube formation, wound healing and migration assay. exo-ELISA and Western Blot were used to evaluate the exosomes secretion of hBMMSCs from HPP, and the protein expression of VEGF, PDGFBB, Angiostatin and Endostatin in exosomes respectively. Results We verified that ALPL ablation resulted in impaired pro-angiogenic capacity of hBMMSCs, accounting for reduced migration and tube formation of human umbilical vein endothelial cells, as the quantities and proteins composition of exosomes varied with ALPL expression. Mechanistically, loss of function of ALPL enhanced ATP release. Additional ATP, in turn, led to markedly elevated level of ATP receptor P2X7, which consequently promoted exosomes secretion, resulting in a decreased capacity to promote angiogenesis. Conversely, inhibition of P2X7 increased the angiogenic induction capacity by preventing excessive release of anti-angiogenic exosomes in ALPL deficient-hBMMSCs. Conclusion The ALPL–ATP axis regulates the pro-angiogenic ability of hBMMSCs by controlling exosomes secretion through the P2X7 receptor. Thus, P2X7 may be proved as an effective therapeutic target for accelerating neovascularization in ALPL–deficient bone defects.

Detection of specific antinuclear antibodies is very important in term of diagnosis, prognosis and management of patients with systemic autoimmune rheumatic diseases. Chemiluminescence microarray immunoassay (CLMIA) is a microdot array-based method that allows simultaneous detection of multiple antinuclear antibodies, which received increasing attention.

The limited folding resistance of continuous silicon carbide (SiC) fibres hinders their application as flexible, foldable materials. With this objective in mind, the folding endurance and damage properties of the second (2nd) and third (3rd) generation continuous SiC fibre tows were investigated through repeated folding tests, optical microscope observation and tensile tests. These SiC fibre tows were disassembled from two-dimensional (2D) SiC fibre braided fabrics with varying braiding angles. The braiding process can alleviate the force on fibre tows during the textile forming process. The investigation of damage mechanisms and analysis of force conditions are instrumental in optimizing structural parameters. The research findings suggested that, in comparison to the 3rd generation continuous SiC fibres, the 2nd generation SiC fibre tows demonstrated higher resistance to repeated folding. In contrast, the 2nd generation fabrics exhibited slightly lower folding endurance values. After repeated folding, the SiC fibre tows in fabrics showed the highest strength losses near the braiding angle of 37.8° to 38.3°. In comparison, the SiC fibre fabric demonstrated the lowest folding endurance values (approximately 760 times) near the braiding angle of 41° to 42°. Considering factors such as folding endurance value, the strength loss rate of fibre tows and fabric strength loss rate, it can be concluded that SiC fibres in fabrics with large braiding angles exhibit optimal performance in terms of folding endurance.

High-performance flexible pressure sensors provide comprehensive tactile perception and are applied in human activity monitoring, soft robotics, medical treatment, and human-computer interface. However, these flexible pressure sensors require extensive nano-architectural design and complicated manufacturing and are time-consuming. Herein, a highly sensitive, flexible piezoresistive tactile sensor is designed and fabricated, consisting of three main parts: the randomly distributed microstructure on T-ZnOw/PDMS film as a top substrate, multilayer Ti3C2-MXene film as an intermediate conductive filler, and the few-layer Ti3C2-MXene nanosheet-based interdigital electrodes as the bottom substrate. The MXene-based piezoresistive sensor with randomly distributed microstructure exhibits a high sensitivity over a broad pressure range (less than 10 ​kPa for 175 ​kPa−1) and possesses an out-standing permanence of up to 5000 cycles. Moreover, a 16-pixel sensor array is designed, and its potential applications in visualizing pressure distribution and an example of tactile feedback are demonstrated. This fully sprayed MXene-based pressure sensor, with high sensitivity and excellent durability, can be widely used in, electronic skin, intelligent robots, and many other emerging technologies.