Search

The heat transfer mechanism of natural convection has been extensively studied as a passive heat removal system of new nuclear power plants. Considering this aspect, the main objective of this study is to present an assessment of RELAP5 linear-equation solver under a transient two-fluid model for a two-phase natural circulation loop (NCL). For this assessment, three different approaches of linear-equation solvers for the hydrodynamic model are presented: the sparse matrix solver based on the Lower-Upper (LU) decomposition, the Border-Profile Lower Upper (BPLU) solver and the iterative method named Generalized Minimal Residual Method (GMRES). For comparison purposes, an experimental natural circulation loop made of glass tubes and using water as working fluid is analyzed. The onset of nucleate boiling observed during the experiment was predicted by all RELAP5 solvers as well as the representation of flow oscillations along the loop. Furthermore, it was noticed that the choice of the solver algorithm has a strong influence on the prediction of the two-phase natural circulation phenomena, since different wavelengths and amplitudes of flow instabilities were obtained for each approach.

The present study concerns a detailed analysis of flow boiling phenomena under high pressure systems using a two-fluid Eulerian approach provided by a Computational Fluid Dynamics (CFD) solver. For this purpose, a vertical heated pipe made of stainless steel with an internal diameter of 15.4 mm was considered as the modeled domain. Two different uniform heat fluxes and three saturation pressures were applied to the channel wall, whereas water mass flux of 900 kg/m2 s was considered for all simulation cases. The model was validated against a set of experimental data and results have indicated a promising use of the CFD technique for estimation of the wall temperature, the liquid bulk temperature and the location of the departure of nucleate boiling. Changes in factors applied in the modeling of the interfacial heat transfer coefficient and bubble departure frequency were suggested, allowing a better prediction of the void fraction along the heated channel. The commercial CFD solver FLUENT 14.5 was used for the model implementation.