Search

A photovoltaic (PV)-based stand-alone power system is usually used to manage the energy supplied from several power sources such as PV solar arrays and battery and deliver a continuous power to the users in an appropriate form. Traditionally, three different dc/dc converters would have been used. To reduce the cost and improve the power density of the power system, an integrated solution of PV isolated dc/dc three-port converter (TPC) is proposed in this paper. Zero current switching can be achieved for all main diodes and MOSFETs to improve the efficiency, and a continuous input current of solar array is maintained by adding a magnetic switch derived from a fourth winding of the half-bridge transformer. Based on the energy-balancing part formed by boost, the control methods for the single module to realize maximum power point tracking (MPPT), battery charge control, and main bus regulation are proposed. The power system control method for multimodules in parallel is also derived, and the operation of the TPC power system can be transited between conductance mode and MPPT mode automatically. Finally, the experimental results verify that the proposed TPC, together with the proposed control method, meets the requirements of a high-power-density stand-alone PV-battery power system. [ABSTRACT FROM PUBLISHER]

This paper proposes two novel dc/dc choppers with dc circuit breaker functionality for HVDC transmission lines. These converters feature step-up and/or step-down functions with instant interruption of short-circuit faults. Compared to other state-of-the-art converter topologies described in the literature, the proposed topologies have better control functions, lower manufacturing costs and reduced energy losses. A double closed-loop controller is designed to regulate the inductor current and output voltage of the converters. An auxiliary controller is also proposed to ensure proper shut-down of the circuit breaker in the event of dc short-circuit faults. The simulation and experimental results are presented to validate the effectiveness of the proposed converter configurations and control scheme. [ABSTRACT FROM AUTHOR]