Search

Strong light absorbing properties, and the ability to drive electrochemical reactions on their surface has sparked, allow plasmonic metal nanoparticles to serve as photocatalysts. After plasmon excitation, hot charge carriers are generated in the metal nanoelectrode, driving electrochemical reactions. To achieve plasmonic photocatalysis, the hot charge carriers must be harnessed before they decay by giving off heat to the surroundings. Here, we demonstrate the role of photogenerated hot holes in oxidative electrodissolution of individual gold nanorods in chloride electrolyte. We monitor the plasmon resonance spectroscopically using snapshot hyperspectral imaging with millisecond time resolution, while electrochemically tuning charge carrier density. We show that light induced hot charge carriers enhance the rate of gold oxidation and subsequent electrodissolution tenfold. Importantly, we find that hot holes generated from interband transitions compared to holes in the sp-band around the Fermi level contribute to electro-oxidation. We further show that the reaction onset potential cannot be lowered below the chloride onset potential, demonstrating that electrochemical mediation is required. These results provide new insights into hot hole driven photocatalysis while emphasizing the need for statistical descriptions of electrochemical non-equilibrium processes on innately heterogeneous nanoparticle supports. Figure: Schematic representation of experimental setup and mechanism. a: when positive potentials are applied while illuminating the nanoparticle, the scattering intensity and hence volume of the nanoparticle decreases (see inset). b: photo-generated hot holes inject into the HOMO of adsorbed chloride. Figure 1

Summary Plasmonic nanoparticles offer promise in photoelectrochemistry by enhancing the rate and selectivity of reactions and in sensing by responding optically to local reactions. Optical electrochemical measurements at the single-particle level are necessary for understanding and eventually controlling the role of plasmons in such complex environments. Recently, researchers have developed techniques to optically measure electrochemical reactions at the surface of single nanoparticles and individual aggregates, allowing for the high-throughput screening necessary to resolve subpopulations of active nanoparticle catalysts and identify active sites on aggregate structures. This review highlights single-nanoparticle and nanoparticle aggregate electrochemical techniques and how they can be used to isolate and elucidate the role of surface plasmons in enhancing catalyst activity and sensing electrochemical processes at the nanoscale.

Plasmon-mediated processes provide unique opportunities for selective photocatalysis, photovoltaics, and electrochemistry. Determining the influence of particle heterogeneity is an unsolved problem because often such processes introduce irreversible changes to the nanocatalysts and/or their surroundings. The challenge lies in monitoring heterogeneous nonequilibrium dynamics via the slow, serial methods that are intrinsic to almost all spectral acquisition methods with suitable spatial and/or spectral resolution. Here, we present a new metrology, snapshot hyperspectral imaging (SHI), that facilitates in situ readout of the tube lens image and first-order diffraction image of the dark-field scattering from many individual plasmonic nanoparticles to extract their respective spectra simultaneously. Evanescent wave excitation with a supercontinuum laser enabled signal-to-noise ratios greater than 100 with a time resolution of only 1 ms. Throughput of ∼100 simultaneous spectra was achieved with a highly ordered...

We report a study of the shape-dependent spectral response of the gold nanoparticle surface plasmon resonance at various electron densities to provide mechanistic insight into the role of capacitive charging, a topic of some debate. We demonstrate a morphology-dependent spectral response for gold nanoparticles due to capacitive charging using single-particle spectroscopy in an inert electrochemical environment. A decrease in plasmon energy and increase in spectral width for gold nanospheres and nanorods was observed as the electron density was tuned through a potential window of -0.3 to 0.1 V. The combined observations could not be explained by existing theories. A new quantum theory for charging based on the random phase approximation was developed. Additionally, the redox reaction of gold oxide formation was probed using single-particle plasmon voltammetry to reproduce the reduction peak from the bulk cyclic voltammetry. These results deepen our understanding of the relationship between optical and electronic properties in plasmonic nanoparticles and provide insight toward their potential applications in directed electrocatalysis.

Understanding and controlling protein adsorption on surfaces is critical to a range of biological and materials applications. Kinetic details that provide the equilibrium and nonequilibrium mechanisms are difficult to acquire. In this work, single-molecule fluorescence microscopy was used to study the adsorption of Alexa 555 labeled α-lactalbumin (α-LA) on two chemically identical but morphologically different polymer surfaces: flat and porous nylon-6,6 thin films. The adsorption kinetics of spatially resolved single molecule α-LA binding to nylon films were quantified by a monolayer adsorption model. The surface morphology of the porous nylon-6,6 films increased the number of adsorption sites but decreased the binding affinity compared to the flat films. Such single-molecule based kinetic studies may be extended to various protein-polymer interactions.

A spectroelectrochemical flow cell is used to probe the localized surface plasmon resonance (LSPR) of the same single gold nanorods (AuNRs) in sodium fluoride, sodium chloride, and sodium bromide electrolytes using dark-field scattering microscopy. The changes in resonance energy, line width (full-width at half-maximum, fwhm), and peak intensity of a Lorentzian fit to single AuNR scattering spectra as the rods are charged are compared to determine the role of anion adsorption. We demonstrate that at positive potentials up to +0.25 V relative to a Pt quasi-reference electrode, the induced changes in the LSPR are independent of halide anion. At more positive potentials (+0.3 to +0.35 V) bromide and chloride ions damp the AuNR LSPR, observed as an increase in the line width. At the most positive potential investigated in all three electrolyte solutions (+0.35 V), the AuNR scattering intensity decreases irreversibly in bromide electrolyte, indicating dissolution. The kinetics of the bromide-mediated dissoluti...

Nanoparticle and thin film surface plasmons are highly sensitive to electrochemically induced dielectric changes. We exploited this sensitivity to detect reversible electrochemical potential-driven anion adsorption by developing single-particle plasmon voltammetry (spPV) using plasmonic nanoparticles. spPV was used to detect sulfate electroadsorption to individual Au nanoparticles. By comparing both semiconducting and metallic thin film substrates with Au nanoparticle monomers and dimers, we demonstrated that using Au film substrates improved the signal in detecting sulfate electroadsorption and desorption through adsorbate modulated thin film conductance. Using single-particle surface plasmon spectroscopic techniques, we constructed spPV to sense sulfate, acetate, and perchlorate adsorption on coupled Au nanoparticles. spPV extends dynamic spectroelectrochemical sensing to the single-nanoparticle level using both individual plasmon resonance modes and total scattering intensity fluctuations.

The incorporation of metal nanoparticles into bulk electrochemical systems has resulted in technological advances in electronics, electrocatalysis, and sensing. Metal “nanoelectrodes” are exposed to varied chemical environments that can cause dissolution under applied potentials, often below bulk oxidation values. Gold nanorods are being developed as superior light harvesting nanoantennas in photoelectrocatalysis, and light scatterers for nanoscopic spectroelectrochemical sensing. However, dissolution poses a critical problem for gold nanoelectrode functionalized devices as the electrochemical and optical properties of nanoparticles are highly dependent on size and shape, and the cost of replacement can be prohibitive. We employed an analytical, single particle approach to monitor the chloride-mediated dissolution pathway of gold nanorods in the presence of oxoanion electrodissolution inhibitors. Hyperspectral dark-field imaging revealed that the morphological stability of gold nanorods at anodic potentials improved with the addition of low relative concentrations of oxoanions to aqueous halide electrolyte solutions. Single particle measurements were necessary to address the inter-particle heterogeneity of chemically synthesized gold nanorods. Direct correlation imaging of single gold nanorods with scanning electron microscopy supported the reaction pathway heterogeneity statistics and electrodissolution potentials obtained spectroscopically. We determined that the electrodissolution inhibition capacity of oxoanions in the presence of chloride ions for gold nanoparticles was governed primarily by the electroadsorption potential and ionicity of the oxoanion. Determining the factors for inhibition will assist in the expansion of the electrochemical stability window, opening new avenues for gold nanoelectrodes in diverse and harsh catalytic and sensing environments.

Interactions between fluorophores and plasmonic nanoparticles modify the fluorescence intensity, shape, and position of the observed emission pattern, thus inhibiting efforts to optically super-resolve plasmonic nanoparticles. Herein, we investigate the accuracy of localizing dye fluorescence as a function of the spectral and spatial separations between fluorophores (Alexa 647) and gold nanorods (NRs). The distance at which Alexa 647 interacts with NRs is varied by layer-by-layer polyelectrolyte deposition while the spectral separation is tuned by using NRs with varying localized surface plasmon resonance (LSPR) maxima. For resonantly coupled Alexa 647 and NRs, emission to the far field through the NR plasmon is highly prominent, resulting in underestimation of NR sizes. However, we demonstrate that it is possible to improve the accuracy of the emission localization when both the spectral and spatial separations between Alexa 647 and the LSPR are optimized.

Super-resolution microscopy typically achieves high spatial resolution, but the temporal resolution remains low. We report super temporal-resolved microscopy (STReM) to improve the temporal resolution of 2D super-resolution microscopy by a factor of 20 compared to that of the traditional camera-limited frame rate. This is achieved by rotating a phase mask in the Fourier plane during data acquisition and then recovering the temporal information by fitting the point spread function (PSF) orientations. The feasibility of this technique is verified with both simulated and experimental 2D adsorption/desorption and 2D emitter transport. When STReM is applied to measure protein adsorption at a glass surface, previously unseen dynamics are revealed.

Redox electrochemistry was used to reversibly tune the optical properties of plasmonic core-shell nanoparticles and dimers., The optical properties of metallic nanoparticles are highly sensitive to interparticle distance, giving rise to dramatic but frequently irreversible color changes. By electrochemical modification of individual nanoparticles and nanoparticle pairs, we induced equally dramatic, yet reversible, changes in their optical properties. We achieved plasmon tuning by oxidation-reduction chemistry of Ag-AgCl shells on the surfaces of both individual and strongly coupled Au nanoparticle pairs, resulting in extreme but reversible changes in scattering line shape. We demonstrated reversible formation of the charge transfer plasmon mode by switching between capacitive and conductive electronic coupling mechanisms. Dynamic single-particle spectroelectrochemistry also gave an insight into the reaction kinetics and evolution of the charge transfer plasmon mode in an electrochemically tunable structure. Our study represents a highly useful approach to the precise tuning of the morphology of narrow interparticle gaps and will be of value for controlling and activating a range of properties such as extreme plasmon modulation, nanoscopic plasmon switching, and subnanometer tunable gap applications.