Search

Cancer is one of the most serious diseases that threaten human life. In the last few decades, there was a significant decrease in the death rate in the US due to cardiovascular, cerebrovascular, and infectious diseases, however non-significant alteration in cancer-related mortalities was achieved since 1950 despite the quick improvement in research methodology and technology. Thus, discovering and developing novel methods for the early detection of cancer has a vital importance. The detection of cancer biomarkers plays an important role in clinical diagnoses and evaluation of treatment for patients. Many immunoassay methods are developed for detection of cancer biomarkers. Early detection of cancer biomarkers plays an important role in clinical diagnoses, oncological medicine and evaluation of treatment for patients. Recent and previous research has shown early detection of cancer increases the odds of patient survival. Different methods have been used for tumor marker detection and determination, in the last five years several reports have appeared where intrinsically fluorescent techniques have been used for tumor markers in cancer patients. In this work the first step towards a molecularly imprinted polymer (MIP) based on star fish compounds for the detection of some tumor markers via fluorescence spectroscopic techniques was presented. The interactions of a new synthesized dendrimer compounds with Alpha-fetoprotein and cancer antigens CA15-3 tumor markers have been studied using spectroscopic techniques. [ABSTRACT FROM AUTHOR]

This work presents a significant investigation involving both electrochemical experiment and quantum chemical simulation approaches. The objective was to characterize the electrochemical detection of dopamine (DA). The detection was carried out using a modified carbon paste electrode (CPE) incorporating bentonite (Bent) and l-cysteine (CySH) (named as CySH/Bent/CPE). To understand and explain the oxidation mechanism of DA on the CySH/Bent modified electrode surface, the coupling of the two approaches were exploited. The CySH/Bent/CPE showed excellent electroactivity toward DA such as good sensibility, selectivity, stability, and regenerative ability. The developed sensor shows a dynamic linear range from 0.8 to 80 μM with a limit of detection and quantification of 0.5 μM and 1.5 μM, respectively. During the quantitative analysis of DA in presence of ascorbic acid (AA) and uric acid (UA) the electrochemical oxidation signals of AA, DA, and UA distinctly appear as three separate peaks. The potential differences between the peaks are 190 mv, 150 mv, and 340 mV for the AA-DA, DA-UA, and AA-UA oxidation pairs, respectively. These observations stem from square wave voltammetry (SWV) studies, along with the corresponding redox peak potential separations. The developed sensor is simple and accurate to monitor DA in human serum samples. On the other hand, CySH acts as an electrocatalyst on the CySH/Bent/CPE surface by increasing its active electron transfer sites, as suggested by the quantum chemical modeling with analytical results of Fukui. Furthermore, the voltammetric results obtained agree well with the theoretical calculations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study aims to develop a suitable electrochemical electrode through the incorporation of potassium montmorillonite (MMT K10 )clay into the carbon matrix for the direct and sensitive determination of paracetamol (PAR) in pharmaceutical formulations. Electrochemical characterization of the electrodes involves the use of techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The results reveal that the voltammetric response of PAR is linear over a wide concentration range (1.0-15 μM), with a low detection limit of 0.46 μM. Analytically, PAR recovery results were around 94%, indicating that the developed electrode is highly suitable for PAR detection in pharmaceutical formulation. Additionally, density functional theory (DFT) is employed to investigate the reactivity of PAR and explain the interaction process of PAR on the electrode surface at different pH values. A Monte Carlo simulations model is developed to provide a deeper understanding of the adsorption mechanism, particularly to comprehend molecular interactions and preferential orientations of PAR with MMT fractions at the electrode surface. Reduced Density Gradient is calculated and discussed using techniques such as Multiwfn and Visualization of Molecular Dynamics. The developed CPE-MMT K10 sensor provided a simple preparation method, rapid response, high sensitivity, reproducibility, strong selectivity, and extended stability. Moreover, there is a good correlation between most parameters calculated by DFT and experimental results, thereby reinforcing the validity of the theoretical approach in this study., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A novel modification of a paste carbon electrode by Bentonite (Bent) and l-Cysteine (l-Cyst) was carried out for uric acid (UA) and ascorbic acid (AA) detection and quantification. Morphological and compositional characterization of the electrode surface were carried out using electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopic analysis (EDS). Cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques were used to analyze UA and AA. The obtained sensor shows a good stability, sensibility, selectivity, and regeneration ability. Accordingly, the limit of detection (LOD) is found to be 0.031 μm and 9.6 μm for UA and AA, respectively. A good linearity in the range of 0.1 to 100 μm for UA and 10 to 1000 μm for AA was obtained. The peak-to-peak separation of UA-AA (ΔE UA-AA ) was determined to be 330 mV. In addition, the sensor is applied successfully to monitor UA and AA in serum samples., (© 2023 The Authors. Published by Wiley-VCH GmbH.)

Neuroblastoma is a pediatric neuroblastic tumor arising in the sympathetic nervous crest cells. A high grade of Neuroblastoma is characterized by a high urinary excretion of homovanillic acid and dopamine. In this work l-leucine modified Sol-Gel-Carbon electrode was used for a sensitive voltammetric determination of homovanillic acid and dopamine in urine. The electrochemical response characteristics were investigated by cyclic and differential pulse voltammetry; the modified electrode has shown an increase in the effective area of up to 40%, a well-separated oxidation peaks and an excellent electrocatalytic activity. High sensitivity and selectivity in the linear range of 0,4-100μML -1 of homovanillic acid and 10-120μML -1 of dopamine were also obtained. Moreover, a sub-micromolar limit of detection of 0.1μM for homovanillic acid and 1.0μM for the dopamine was achieved. Indeed, high reproducibility with simple preparation and regeneration of the electrode surface made this electrode very suitable for the determination of homovanillic acid and dopamine in pharmaceutical and clinical preparations. The mechanism of homovanillic acid and the electrochemical oxidation at l-leucine modified Sol-Gel-Carbon electrode is described out the B3P86/6-31+G(d,p) level of theory as implemented in Gaussian software., (Copyright © 2016 Elsevier B.V. All rights reserved.)