Search

A filler injection in the nose can be essential but is also dangerous, especially in the nasal cartilage region. To safely and accurately perform a filler injection, surgeons must have detailed knowledge of nasal anatomy.Associated the vessel branches and the characteristics of different nasal regions to provide suggestions for more suitable injection sites.Fifty specimens underwent computed tomography (CT) after contrast infusion. Qualified specimens were selected for 3D CT reconstruction. Dissection was performed to confirm the accuracy of the CT data.The branches of arteries with large diameters, the dorsal nasal artery (DNA) and the lateral nasal artery (LNA) were distributed within the superficial musculoaponeurotic system layer. The DNA was seen in only 58% of specimens. The artery crossed the midline over the upper lateral cartilage in 16% of specimens. The LNA was a constant branch that traversed the nasal tip. The LNA crossed the midline to the contralateral side in 18% of patients. We divided the nasal cartilage dorsum into two regions for easy handling: the supratip region (STR) and the nasal tip region (NTR). The branches distributed in the STR mostly originated from the DNA (81.6%, 40/49), while those in the NTR mostly originated from the LNA.The vasculature of the nasal cartilage region observed in this study is similar to that observed in previous studies. However, we found that the STR was an advantageous area for filler injection. At the same time, we provided suggestions for more suitable injection methods.This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

The forehead has high risks associated with filler injection considering its highly complex vascular system. This study aims to thoroughly describe the anatomical variations and relationships between the supratrochlear artery (STA) and supraorbital artery (SOA).We studied 56 cadaveric heads by computed tomography after contrast-agent injection.The deep branch of the STA originated in the deep superior orbital arcade and the ophthalmic artery (OA), whereas that of the SOA originated at 3 locations: the deep superior orbital arcade, deep superior orbital artery, and OA. The superficial branch of the STA also had 3 origins: the superficial superior orbital arcade, OA, and angular artery, whereas the superficial branch of the SOA had 2 origins: the superficial superior orbital arcade and OA. Based on the relationship between the STA and SOA, 2 main arterial distribution patterns were observed in both superficial and deep layer arteries: STA/SOA connected pattern and STA/SOA disconnected pattern, of which the latter pattern has 3 subtypes.The forehead arteries have complex origins. The relationship of the supratrochlear and supraorbital arteries could be categorized into 2 main patterns. The study elucidated the complexity of the forehead vasculature.

Glabellar filler injection is linked to an increased risk of blindness. A thorough understanding of vascular changes in the glabellar area is critical for safety. The study's goal was to precisely determine the three-dimensional placements of the arteries in the glabellar area.In 117 cadavers, the vascular structures in the glabellar area were examined. There were four segments (S1/S1'-S4/S4') and five points (P1-P5) specified. The number of identified arteries found in each section and at each position was tallied. Additionally, the depth of the underlying identified artery under each site was measured.One to three named arteries per glabellar segment were found. Each segment had at least one named artery, and the number of named arteries detected between S1/S1' and S4/S4' decreased. The chance of encountering identified arteries at the 5 designated locations, P1-P5, was 7/117 (6.0%), 6/117 (5.1%), 7/117 (6.0%), 6/117 (5.1%), and 16/117 (13.7%), respectively. At P1-P5, the major artery trunk was 1.8 ± 0.3 mm, 1.6 ± 0.3 mm, 1.4 ± 0.2 mm, 1.3 ± 0.3 mm, and 1.1 ± 0.2 mm below the skin.The site of the glabellar arteries was clearly shown in this investigation; these arteries were met at a rate of 14% from P1 to P5. We demonstrated that a single entry site through the glabella via cannula could readily keep the needle deep enough for safe glabellar filler injection.This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

The malar augmentation injection has gained popularity in recent years, but the exact location of each injection site has not been clearly identified.To discover ideal injection sites by comprehensively considering the distributions of ligaments, muscles, and vessels.Eighteen cadaver heads were dissected to investigate the zygomatic ligamentous system and to measure the position of muscles. Sixty-six cadaver heads were subjected to computed tomographic scanning and three-dimensional vessel reconstruction. Radiological evaluation of the fillers was performed before and after experimental injection in one hemiface and dissected to confirm safe delivery. Five patients were enrolled in a prospective clinical study. 2D and 3D photographs were taken before and after the injections for comparison.Site 1 was defined along the zygomatic arch, except the first 1/4 length and the midline of the arch. Site 2 was on the body of the zygoma, superior to the level of the infraorbital foramen and medial to the jugale. Site 3 was defined in the anteromedial midface approximately 30 mm below the lateral canthus.Injections at these 3 sites can be performed within the range of the ligaments to achieve effective lifting effects and minimize potential complications.

BACKGROUND When performing filler injection procedures to the nasojugal groove, there is the risk of iatrogenic damage to the detoured facial artery. OBJECTIVE To determine the 3-dimensional location of the detoured facial artery. MATERIALS AND METHODS The branches of the facial arteries from 118 cadaveric hemifaces were scanned using computed tomography and reconstructed using the Mimics software program. RESULTS Detoured facial arteries were found in 47 of the 118 hemifaces (39.8%). Two main arterial patterns were identified: in Type I (29 of 47 cases), there were both detoured and nasolabial trunks where the facial artery originated, whereas in Type II (18 of 47 cases), there was only a detoured trunk. The detoured trunk originated 32.0 ± 5.3 mm from the midsagittal line, 5.0 ± 2.8 mm from the occlusion plane, and 5.9 ± 3.5 mm below the skin layer; the inflection of the detoured trunk was located 30.0 ± 5.6 mm laterally, 26.2 ± 4.4 mm superiorly, and 5.7 ± 2.6 mm deep. The meeting point with the inferior orbital rim plane was located 17.1 ± 3.4 mm laterally, 43.4 ± 3.1 mm superiorly, and 2.8 ± 1.7 mm deep. CONCLUSION The 3-dimensional location of the detoured facial artery as reported here will help clinicians to avoid iatrogenic damage when they are performing filler injection procedures.

Background Temple filler injection is one of the most common minimally invasive cosmetic procedures involving the face; however, vascular complications are not uncommon. Objectives This study aimed to investigate the anatomy of the temporal vessels and provide a more accurate protocol for temple filler injection. Methods Computed tomography (CT) scans of 56 cadaveric heads injected with lead oxide were obtained. We then used Mimics software to construct 3-dimensional (3D) images of the temporal vessels described by a coordinate system based on the bilateral tragus and right lateral canthus. Results In the XOY plane, the superficial temporal artery (STA), middle temporal artery (MTA), zygomatico-orbital artery (ZOA), posterior branch of the deep temporal artery (PDTA), and lateral margin of the orbital rim divide the temple into 4 parts (A, B, C, and D). The probabilities of the STA, MTA, ZOA, and PDTA appearing in parts A, B, C, and D were 30.73%, 37.06%, 39.48%, and 77.18%, respectively. In 3D images, these vessels together compose an arterial network that is anastomosed with other vessels, such as the external carotid, facial, and ocular arteries. Conclusions 3D CT images can digitally elucidate the exact positions of temporal vessels in a coordinate system, improving the safety of temple filler injections in a clinical setting.

Background Strengthening weakened ligament tissues with injectable fillers to improve their supportive effect may achieve the aesthetic goal of face lifting. Objectives The aim of the study was to design an injectable technique for enhancing the true facial ligaments and dissect the ligaments to provide anatomical guidance for effective injection. Methods Six true facial ligaments were chosen as target anatomical sites for injection. Specimens were dissected, and 3-dimensional (3D) images were reconstructed to confirm the exact location of each injection site and to confirm that the proposed injection routes will not cause dangerous vascular damage. A total of 5 patients received the injections; 3D images were taken before and after the injections for comparison and clinical outcome assessments. Results The injection technique was designed to target 6 true facial ligaments, as follows. Site 1 targeted the temporal ligamentous adhesion region to lift the lateral ends of the eyebrows. Site 2 targeted the region of the lateral orbital thickening to lift the lateral canthus. Site 3 and site 4 targeted the zygomatic retaining ligaments and zygomatic cutaneous ligaments, respectively, to augment the soft tissues of the midface. Site 5 targeted the region of the maxillary ligament to lessen the nasolabial folds, and site 6 targeted the mandibular ligament to reduce the marionette line. Conclusions This site-specific injection technique targeting the true ligaments may lead to increased efficiency and accuracy of face rejuvenation and exert a lifting effect. Level of Evidence: 4

Background Injection-based techniques for "cheek augmentation" have gained popularity in recent years. The aim of this study was to perform a topographic analysis of the depth and distribution of the vessels in the zygomatic region to facilitate clinical procedures. Methods The external carotid arteries of seven cadaveric heads were infused with lead oxide contrast medium. The facial and superficial temporal arteries of another 12 cadaveric heads were injected sequentially with the same medium. Computed tomographic scanning was then performed, and three-dimensional computed tomographic scans were reconstructed using validated algorithms. Results The vessels on the zygomatic arch received a double blood supply from across the upper and lower borders of the arch, and the number of the vessels varied from one to four. Ninety percent of the vessels on the zygomatic arch were at a depth of 1 to 2.5 mm, and 75 percent were at a depth of 10 to 30 percent of the soft-tissue thickness. The vessels were concentrated on the midline of the zygomatic arch and the lateral margin of the frontal process. All samples showed a vessel travel along the lateral margin of the frontal process that eventually merged into the superior marginal arcades. Conclusions This study reported a topographic analysis of the depth and distribution of the vessels in the zygomatic region based on three-dimensional scanning. The results indicated that injection on the zygomatic arch should be performed deep to the bone, and the vascular zones anterior or posterior to the midline of the zygomatic arch were relatively safe injection areas.

Anatomical knowledge of the zygomatic cutaneous ligament is crucial for rejuvenation of the anteromedial midface. However, there is a lack of satisfactory descriptions of the anatomy of the zygomatic cutaneous ligament, and the exact range and location are still controversial. The present study attempts to clarify the anatomy of the zygomatic cutaneous ligament to provide vital information for clinical operations.Facial dissection was performed on 36 cadaver hemifaces. The location of the zygomatic cutaneous ligament was investigated and recorded relative to the Frankfort horizontal line and several vertical reference lines. The relative relationship of the zygomatic cutaneous ligament with surrounding anatomical structures was also investigated.The zygomatic cutaneous ligament is a septum-like osteocutaneous ligament originating from the periosteum of the maxilla and zygoma. The overall range of the zygomatic cutaneous ligament starts at the origin of the levator labii superioris and then extends laterally, following the curvature of the inferior bone margin. After merging with the ligamentous part at the origin of zygomaticus minor and zygomaticus major muscle (11.65 mm inferior to the horizontal line), it continues as the zygomatic retaining ligament on the zygomatic arch. The vertical distances between the zygomatic cutaneous ligament and horizontal line along the L1, L2, L3, L4, and L5 reference lines are 9.1, 19.5, 22.1, 21.7, and 18.7 mm, respectively.The anatomical data obtained in the present study regarding the location of the zygomatic cutaneous ligament might be valuable for understanding the appearance of the midcheek fold and be helpful for surgical procedures to rejuvenate the anteromedial midface.

Background The forehead is a challenging area for filler injection because of the risk of serious complications. Anatomy-based filler injection techniques help to avoid severe vascular complications. Materials and methods Sixty-six cadaver heads were infused with adequate lead oxide contrast through the external carotid arteries, internal carotid arteries, facial artery, and superficial temporal artery. Three-dimensional computed tomography scans were reconstructed using validated algorithms. We measured the length and arc length of "beautiful" foreheads evaluated by 3 skilled surgeons. Results The frontal branch of the superficial temporal artery (FBSTA) was classified based on the main trunk as follows: Type I FBSTA (89.72%) took a sudden turn (89.56° ± 11.76°) once passing through the temporal crest, whereas Type II FBSTA (10.28%) barely turned (52.26° ± 6.81°) at the temporal crest. A total of 319 arteries passed through the midline in 48 cadaver heads. There were more superficial arteries (292 of 319) than deep arteries (27 of 319). The difference in the length and arc length of the forehead was 19.66 ± 4.35 mm. Conclusion This study introduces an effective technique for forehead filler injection that minimizes the risk of filler injection and improves patient satisfaction.

Vascular complications resulting from intravascular filler injection and embolism are major safety concerns for facial filler injection. It is essential to systematically screen full-face arterial variations and help design evidence-based safe filler injection protocols.The carotid arteries of 22 cadaveric heads were infused with adequate lead oxide contrast. The facial and superficial temporal arteries of another 12 cadaveric heads were injected with the contrast in a sequential order. A computed tomographic scan was acquired after each contrast injection, and each three-dimensional computed tomographic scan was reconstructed using validated algorithms.Three-dimensional computed tomography clearly demonstrated the course, relative depth, and anastomosis of all major arteries in 63 qualified hemifaces. The ophthalmic angiosome consistently deploys two distinctive layers of branch arteries to the forehead. The superficial temporal and superior palpebral arteries run along the preauricular and superior palpebral creases, respectively. The study found that 74.6 percent of the hemifaces had nasolabial trunks coursing along the nasolabial crease, and that 50.8 percent of the hemifaces had infraorbital trunks that ran through the infraorbital region. Fifty percent of the angular arteries were the direct anastomotic channels between the facial and ophthalmic angiosomes, and 29.2 percent of the angular arteries were members of the ophthalmic angiosomes.Full-face arterial variations were mapped using postmortem three-dimensional computed tomography. Facial creases were in general correlated with underlying deep arteries. Facial and angular artery variations were identified at high resolution, and reclassified into clinically relevant types to guide medical practice.

Background Filler injection is a popular cosmetic procedure, but it can entail vascular complications. Periorbital injections have the highest risk within the entire injection area. Objectives The authors sought to systematically screen for periorbital arterial variations prior to treatment. Methods The external carotid arteries of 10 cadaveric heads were infused with adequate lead oxide contrast. The facial and superficial temporal arteries of another 11 cadaveric heads were injected with the contrast in sequential order. Computed tomography (CT) scanning was performed after injection of contrast, and 3-dimensional (3D) CT scans were reconstructed using validated algorithms. Results Three types of periorbital blood vessels were found to derive from the ophthalmic artery, including 30% directly originating from the ophthalmic artery, 65% originating from its trochlear branch, and 5% originating from its supraorbital branch. In the forehead, the ophthalmic artery, originating from the internal carotid arteries, formed anastomoses between the frontal branch of the superficial temporal artery, originating from the external carotid artery, with the deep and superficial branches of the supratrochlear and supraorbital arteries, respectively. The lateral orbit and malar plexus can be classified into 4 types based on the trunk artery: the zygomatic orbital artery (27%), the transverse facial artery (23%), the premasseteric branch of the facial artery (19%), and all 3 contributing equally (31%). Conclusions Postmortem 3D CT can map periorbital arterial variations. The branching pattern of the ophthalmic artery, the ophthalmic angiosome in the forehead, and the distribution of the lateral orbit and malar plexus were identified at high resolution to guide clinical practice.

Background Nasal filler placement is associated with a high risk of blindness. The arterial supply to the upper nose overlaying the nasal bones is poorly understood. Objectives The aim of this study was to visualize and analyze the deployment of the ophthalmic and facial angiosomes in the upper nose to help prevent blindness following nasal filler injections. Methods The arterial systems of 62 cadaveric heads were filled with lead oxide contrast agent, and computed tomography (CT) images were acquired and reconstructed in 3 dimensions. Results Twenty-six of the cadaveric noses examined demonstrated clear CT images of the facial and ophthalmic angiosomes in the upper nose. The Type 1 upper nose (15.4%) is supplied by 2 independent ophthalmic angiosomes that communicate indirectly through a choke anastomosis. The Type 2 upper nose (38.5%) is supplied by 2 ophthalmic angiosomes with a true anastomosis between them. The Type 3 upper nose (46.1%) is supplied by both ophthalmic and facial angiosomes with true anastomoses across the dorsal midline. These true anastomoses are mediated by the radix arcade in 46% of the noses and involve the dorsal nasal artery in 65% of the cases. The anastomoses all cross the upper dorsal midline and are directly linked to the ophthalmic angiosome. Conclusions The deployment and anastomosis of the facial and ophthalmic angiosomes in the upper nose fall into 3 major patterns. About 85% of the noses have true anastomotic arteries that cross the upper dorsal midline and are directly linked to the ophthalmic circulation. Dorsum filler injection poses a significant risk of blindness.

Background Vascular complications from periorbital intravascular filler injection are major safety concerns. Objective To thoroughly describe the superior orbital vessels near the orbital rim and propose considerations for upper eyelid and forehead injections. Methods Fifty-one cadaver heads were infused with lead oxide contrast media through the external carotid artery, internal carotid artery, and facial and superficial temporal arteries. Computed tomography (CT) images were obtained after contrast agent injection, and 3-dimensional CT scans were reconstructed by using a validated algorithm. Results Eighty-six qualified hemifaces clearly showed the origin, depth, and anastomoses of the superior orbital vessels, which consistently deployed 2 distinctive layers: deep and superficial. Of all hemifaces, 59.3% had deep superior orbital vessels near the orbital rim, including 44.2% with deep superior orbital arcades and 15.1% with deep superior orbital arteries, which originated from the ophthalmic artery. Additionally, 97.7% of the hemifaces had superficial superior orbital arcades, for which 4 origins were identified: ophthalmic artery, superior medial palpebral artery, angular artery, and anastomosis between the angular and ophthalmic arteries. Limitations The arterial depth estimated from 3-dimensional CT needs to be confirmed by standard cadaver dissection. Conclusion This study elucidated novel arterial systems and proposed considerations for upper eyelid and forehead injections.