Search

The interaction between activators (ZnO) and co-activators (stearic acid, SA) represents a key step in the vulcanization process, to generate Zn(II) intermediate complexes that enhance the reaction kinetic and promote the shortening of sulfur bridges, leading to highly cross-linked materials. To understand the influence of the structural, morphological and surface properties of ZnO in the reactivity with SA, in this work, pure ZnO nanoparticles (NPs) and ZnO NPs anchored on SiO2 (ZnO/SiO2) were prepared through soft chemistry techniques. Tailoring of morphology and surface features was accomplished through a fine control of the synthetic parameters, as demonstrated by the careful characterization of the activators. Then, the interaction of pure ZnO and ZnO/SiO2 activators with SA in the absence of rubber was investigated by using Differential Scanning Calorimetry (DSC). The occurrence of Zn(II)-SA complexes with different thermal stability and structural properties was assessed by a comprehensive thermogravimetric and spectroscopic survey. The generation and the chemical structure of these specific vulcanization intermediates was related to the peculiar characteristics of the ZnO/SiO2 systems and, in turn, to their ability in imparting faster kinetics and higher curing efficiency to isoprene rubber nanocomposites, compared to bare ZnO. These results, besides proposing a valid benchmark for achieving further insights on the interaction of stearic acid with activators, pave the way to provide specific protocols for a better design and implementation of ZnO-based materials able to effectively enhance the rubber vulcanization process, with significant economic and environmental advantages.

The present study reports on the synthesis of a new alkoxysilane-bearing light-responsive cinnamyl group and its application as a surface functionalization agent for the development of SiO2 nanoparticles (NPs) with photoreversible tails. In detail, cinnamic acid (CINN) was activated with N-hydroxysuccinimide (NHS) to obtain the corresponding NHS-ester (CINN-NHS). Subsequently, the amine group of 3-aminopropyltriethoxysilane (APTES) was acylated with CINN-NHS leading to the generation of a novel organosilane, CINN-APTES, which was then exploited for decorating SiO2 NPs. The covalent bond to the silica surface was confirmed by solid state NMR, whereas thermogravimetric analysis unveiled a functionalization degree much higher compared to that achieved by a conventional double-step post-grafting procedure. In light of these intriguing results, the strategy was successfully extended to naturally occurring sepiolite fibers, widely employed as fillers in technological applications. Finally, a preliminary proof of concept of the photoreversibility of the obtained SiO2@CINN-APTES system has been carried out through UV diffuse reflectance. The overall outcomes prove the consistency and the versatility of the methodological protocol adopted, which appears promising for the design of hybrid NPs to be employed as building blocks for photoresponsive materials with the ability to change their molecular structure and subsequent properties when exposed to different light stimuli.

"Hairy" nanoparticles (HNPs), i.e. inorganic NPs functionalized with polymer chains, are promising building blocks for the synthesis of advanced nanocomposite (NC) materials having several technological applications. Recent evidence shows that HNPs self-organize in a variety of anisotropic structures, resulting in an improvement of the functional properties of the materials, in which are embedded. In this paper, we propose a three-step colloidal synthesis of spherical SiO2-HNPs, with controlled particle morphology and surface chemistry. In detail, the SiO2 core, synthesized by a modified Stöber method, was first functionalized with a short-chain amino-silane, which acts as an anchor, and then covered by maleated polybutadiene (PB), a rubbery polymer having low glass transition temperature, rarely considered until now. An extensive investigation by a multi-technique analysis demonstrates that the synthesis of SiO2-HNPs is simple, scalable, and potentially applicable to different kind of NPs and polymers. Morphological analysis shows the overall distribution of SiO2-HNPs with a certain degree of spatial organization, suggesting that the polymer coating induces a modification of NP-NP interactions. The role of the surface PB brushes in influencing the special arrangement of SiO2-HNPs was observed also in cis-1,4-polybutadiene (cis-PB), since the resulting NC exhibited the particle packing in "string-like" superstructures. This confirms the tendency of SiO2-HNPs to self-assemble and create alternative structures in polymer NCs, which may impart them peculiar functional properties.

ZnO is a worldwide used activator for a rubber vulcanization process, which promotes fast curing kinetics and high cross-linking densities of rubber nanocomposites (NCs). However, its extended use together with leaching phenomena occurring during the production and life cycle of rubber products, especially tires, entails potential environmental risks, as ecotoxicity toward aquatic organisms. Pushed by this issue, a novel activator was developed, which introduces highly dispersed and active zinc species in the vulcanization process, reducing the amount of employed ZnO and keeping high the curing efficiency. The activator is constituted by Zn(II) single sites, anchored on the surface of SiO2 nanoparticles (NPs) through the coordination with functionalizing amino silane groups. It behaves as a double-function material, acting at the same time as a rubber reinforcing filler and a curing activator. The higher availability and reactivity of the single-site Zn(II) centers toward curative agents impart faster kinetics and higher efficiency to the vulcanization process of silica/isoprene NCs, compared to conventionally used ZnO activators. Moreover, the NCs show a high cross-linking degree and improved dynamic mechanical properties, despite the remarkably lower amount of zinc employed than that normally used for rubber composites in tires. Finally, the structural stability of Zn(II) single sites during the curing reactions and in the final materials may represent a turning point toward the elimination of zinc leaching phenomena.

Nuclear Magnetic Resonance (NMR) is an analytical technique extensively used in almost every chemical laboratory for structural identification. This technique provides statistically equivalent signals in spite of using spectrometer with different hardware features and is successfully used for the traceability and quantification of analytes in food samples. Nevertheless, to date only a few internationally agreed guidelines have been reported on the use of NMR for quantitative analysis. The main goal of the present study is to provide a methodological pipeline to assess the reproducibility of NMR data produced for a given matrix by spectrometers from different manufacturers, with different magnetic field strengths, age and hardware configurations. The results have been analyzed through a sequence of chemometric tests to generate a community-built calibration system which was used to verify the performance of the spectrometers and the reproducibility of the predicted sample concentrations.

The development of advanced polymer nanocomposites requires a strong filler-polymer interfacial interaction and an optimal filler nanodispersion. The incorporation of the clays into a polymer matrix frequently does not improve the composite mechanical properties, owing to both poor dispersion and macroscopic particle dimensions. In this work, pristine and organically-modified sepiolites (Sep) were structurally modified by an acid treatment, which provides nano-sized sepiolite (NS-Sep) fibers with reduced particle size and increased silanol groups on the surface layer. NS-Sep fibers were used to prepare styrene-butadiene rubber nanocomposites with enhanced mechanical properties. Dynamic-mechanical analysis of clay polymer nanocomposites demonstrated that the NS-Sep fibers provided an excellent balance between reinforcing and hysteretic behavior, compared to the large-sized pristine Sep and isotropic silica. This was related to the enhanced interfacial chemical interaction between NS-Sep and rubber, as well as to the size and self-assembly of anisotropic nanofibers to form filler network structures, as supported by transmission electron microscopy analysis. The preparation of nanocomposites, based on Sep nanofibers obtained by a simple and versatile acid treatment, can thus be considered an alternative approach for the designing of advanced clay polymer nanocomposites

In this study, the preparation of polybutadiene/polysilsesquioxane nanocomposites (NCs) having tunable thermomechanical and dielectric properties is reported. This was achieved by using different amounts of a filler consisting of a silsesquioxane with a defined ladder-like molecular structure (LPMASQ) bearing reactive methacrylate functionalities. In detail, solid-state nuclear magnetic resonance (NMR) investigation revealed that an increasing amount of filler leads to a progressive homopolymerization of LPMASQ units resulting in the generation of domains in the composites, which induce a kind of polymer chain confinement in proximity of the hybrid interface. The evolution of the molecular organization of the inorganic nanobuilding blocks as a function of their concentration has been highlighted also by small-angle X-ray scattering (SAXS) experiments. The gradual assembly of LPMASQ units gives rise to peculiar dielectric properties along with enhanced thermal and mechanical stability of the final NCs, thus supplying suitable materials for applications in high performance dielectrics. Furthermore, these outcomes support the idea that a careful control of the molecular architecture and organization of the silsesquioxanes in a polymer matrix allows to simultaneously modulate two or more distinct functional features of polymer NCs