Search

Background An outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) with an attack rate of 55% (22/40 workers) occurred at a public-facing office in England from August to September 2021. Published evidence regarding outbreaks in office workplaces remains limited. Aims To describe an investigation of workplace- and worker-related risk factors following an outbreak of SARS-CoV-2 in a public-facing office. Methods The COVID-19 (coronavirus disease 2019) Outbreak Investigation to Understand Transmission (COVID-OUT) study undertook an investigation of the outbreak. This included surface sampling, occupational environmental assessment, molecular and serological testing of workers, and detailed questionnaires. Results Despite existing COVID-19 control measures, surface sampling conducted during a self-imposed 2-week temporary office closure identified viral contamination (10/60 samples, 17% positive), particularly in a small, shared security office (6/9, 67% positive) and on a window handle in one open-plan office. Targeted enhanced cleaning was, therefore, undertaken before the office reopened. Repeat surface sampling after this identified only one positive (2%) sample. Ventilation was deemed adequate using carbon dioxide monitoring (typically ≤1000 ppm). Twelve workers (30%) responded to the COVID-OUT questionnaire, and all had been vaccinated with two doses. One-third of respondents (4/12) reported direct physical or close contact with members of the public; of these, 75% (3/4) reported a divider/screen between themselves and members of the public. Conclusions The results highlight the potential utility of surface sampling to identify SARS-CoV-2 control deficiencies and the importance of evolving, site-specific risk assessments with layered COVID-19 mitigation strategies. [ABSTRACT FROM AUTHOR]

An outbreak of SARS-CoV-2 (1 March to 10 May 2021) with an attack rate of 26.5% among approximately 1150 workers at a storage and distribution centre in England prompted a multidisciplinary outbreak investigation (5 May to 6 August 2021), with the aim of better understanding worker- and workplace-related risk factors for viral transmission in the warehousing sector. Overall, environmental factors (e.g., ventilation, humidity and temperature) were assessed to be appropriate at the facility. Nevertheless, 39 (51.3%) surface samples from across the site tested positive for low/ very low levels of SARS-CoV-2 RNA (Ct value ≥ 32.0 for all). Among the study participants, of whom 35.6% were confirmed or suspected cases, 95.5% reported having received COVID-19 prevention training, 100.0% reported handwashing, and 80.0% reported use of face coverings at work. Notably, 43.9% and 19.0% reported working with a symptomatic and a positive contact respectively. Furthermore, 80.5% and 46.3% had concerns regarding reduction in their income and future unemployment, respectively, due to self-isolation. The findings of this study suggest that, in addition to targeted workplace infection control measures and tailored work area specific risk assessments, an enhanced and equitable sick leave policy may help limit presenteeism and viral transmission in large workplaces., (© 2024. Crown.)

B-cell receptor (BCR) signaling plays a major role in the pathogenesis of B-cell malignancies and is an established target for therapy, including in chronic lymphocytic leukemia cells (CLL), the most common B-cell malignancy. We previously demonstrated that activation of BCR signaling in primary CLL cells downregulated expression of PDCD4, an inhibitor of the translational initiation factor eIF4A and a potential tumor suppressor in lymphoma. Regulation of the PDCD4/eIF4A axis appeared to be important for expression of the MYC oncoprotein as MYC mRNA translation was increased following BCR stimulation and MYC protein induction was repressed by pharmacological inhibition of eIF4A. Here we show that MYC expression is also associated with PDCD4 down-regulation in CLL cells in vivo and characterize the signaling pathways that mediate BCR-induced PDCD4 down-regulation in CLL and lymphoma cells. PDCD4 downregulation was mediated by proteasomal degradation as it was inhibited by proteasome inhibitors in both primary CLL cells and B-lymphoma cell lines. In lymphoma cells, PDCD4 degradation was predominantly dependent on signaling via the AKT pathway. By contrast, in CLL cells, both ERK and AKT pathways contributed to PDCD4 down-regulation and dual inhibition using ibrutinib with either MEK1/2 or mTORC1 inhibition was required to fully reverse PDCD4 down-regulation. Consistent with this, dual inhibition of BTK with MEK1/2 or mTORC1 resulted in the strongest inhibition of BCR-induced MYC expression. This study provides important new insight into the regulation of mRNA translation in B-cell malignancies and a rationale for combinations of kinase inhibitors to target translation control and MYC expression., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Workplace-related outbreaks of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) continue to occur globally. The manufacturing sector presents a particular concern for outbreaks, and a better understanding of transmission risks are needed. Between 9 March and 24 April 2021, the COVID-19 (coronavirus disease 2019) Outbreak Investigation to Understand Transmission (COVID-OUT) study undertook a comprehensive investigation of a SARS-CoV-2 outbreak at an automotive manufacturing site in England. The site had a total of 266 workers, and 51 SARS-CoV-2 infections. Overall, ventilation, humidity, and temperature at the site were assessed to be appropriate for the number of workers and the work being conducted. The company had implemented a number of infection control procedures, including provision of face coverings, spacing in the work, and welfare areas to allow for social distancing. However, observations of worker practices identified lapses in social distancing, although all were wearing face coverings. A total of 38 workers, including four confirmed cases, participated in the COVID-OUT study. The majority of participants received COVID-19 prevention training, though 42.9% also reported that their work required close physical contact with co-workers. Additionally, 73.7% and 34.2% had concerns regarding reductions in future income and future unemployment, respectively, due to self-isolation. This investigation adds to the growing body of evidence of SARS-CoV-2 outbreaks from the manufacturing sector. Despite a layered COVID-19 control strategy at this site, cases clustered in areas of high occupancy and close worker proximity.

Signaling via the B-cell receptor (BCR) is a key driver and therapeutic target in chronic lymphocytic leukemia (CLL). BCR stimulation of CLL cells induces expression of eIF4A, an initiation factor important for translation of multiple oncoproteins, and reduces expression of PDCD4, a natural inhibitor of eIF4A, suggesting that eIF4A may be a critical nexus controlling protein expression downstream of the BCR in these cells. We, therefore, investigated the effect of eIF4A inhibitors (eIF4Ai) on BCR-induced responses. We demonstrated that eIF4Ai (silvestrol and rocaglamide A) reduced anti-IgM-induced global mRNA translation in CLL cells and also inhibited accumulation of MYC and MCL1, key drivers of proliferation and survival, respectively, without effects on upstream signaling responses (ERK1/2 and AKT phosphorylation). Analysis of normal naïve and non-switched memory B cells, likely counterparts of the two main subsets of CLL, demonstrated that basal RNA translation was higher in memory B cells, but was similarly increased and susceptible to eIF4Ai-mediated inhibition in both. We probed the fate of MYC mRNA in eIF4Ai-treated CLL cells and found that eIF4Ai caused a profound accumulation of MYC mRNA in anti-IgM treated cells. This was mediated by MYC mRNA stabilization and was not observed for MCL1 mRNA. Following drug wash-out, MYC mRNA levels declined but without substantial MYC protein accumulation, indicating that stabilized MYC mRNA remained blocked from translation. In conclusion, BCR-induced regulation of eIF4A may be a critical signal-dependent nexus for therapeutic attack in CLL and other B-cell malignancies, especially those dependent on MYC and/or MCL1., (© 2021. The Author(s).)

Triple-negative breast cancer (TNBC) is the most aggressive type of breast cancer that lacks the oestrogen receptor, progesterone receptor and human epidermal growth factor receptor 2, making it difficult to target therapeutically. Targeting synthetic lethality is an alternative approach for cancer treatment. TNBC shows frequent loss of phosphatase and tensin homologue (PTEN) expression, which is associated with poor prognosis and treatment response. To identify PTEN synthetic lethal interactions, TCGA analysis coupled with a whole-genome siRNA screen in isogenic PTEN-negative and -positive cells were performed. Among the candidate genes essential for the survival of PTEN-inactive TNBC cells, WDHD1 (WD repeat and high-mobility group box DNA-binding protein 1) expression was increased in the low vs. high PTEN TNBC samples. It was also the top hit in the siRNA screen and its knockdown significantly inhibited cell viability in PTEN-negative cells, which was further validated in 2D and 3D cultures. Mechanistically, WDHD1 is important to mediate a high demand of protein translation in PTEN-inactive TNBC. Finally, the importance of WDHD1 in TNBC was confirmed in patient samples obtained from the TCGA and tissue microarrays with clinic-pathological information. Taken together, as an essential gene for the survival of PTEN-inactive TNBC cells, WDHD1 could be a potential biomarker or a therapeutic target for TNBC.

The contribution of epithelial-mesenchymal transition (EMT) to human lung fibrogenesis is controversial. Here we provide evidence that ZEB1-mediated EMT in human alveolar epithelial type II (ATII) cells contributes to the development of lung fibrosis by paracrine signalling to underlying fibroblasts. Activation of EGFR-RAS-ERK signalling in ATII cells induced EMT via ZEB1. ATII cells had extremely low extracellular matrix gene expression even after induction of EMT, however conditioned media from ATII cells undergoing RAS-induced EMT augmented TGFβ-induced profibrogenic responses in lung fibroblasts. This epithelial-mesenchymal crosstalk was controlled by ZEB1 via the expression of tissue plasminogen activator (tPA). In human fibrotic lung tissue, nuclear ZEB1 expression was detected in alveolar epithelium adjacent to sites of extracellular matrix (ECM) deposition, suggesting that ZEB1-mediated paracrine signalling has the potential to contribute to early fibrotic changes in the lung interstitium. Targeting this novel ZEB1 regulatory axis may be a viable strategy for the treatment of pulmonary fibrosis.

Biological monitoring to assess exposure to diisocyanates in the workplace is becoming increasingly widespread due to its relative ease of use and ability to look at all exposure routes. Currently, biological monitoring measures the corresponding isocyanate-derived diamine in urine, after hydrolysis. Because of this, any exposure to the diamines themselves released during the industrial process could confound the assessment of diisocyanate exposure. This paper reports an initial assessment of the extent of diamine formation and exposure during different processes involving diisocyanates including casting, grouting, core making, spray painting, foam blowing, and floor screeding. Air monitoring and glove analysis were conducted for both the relevant diisocyanate (measured as total NCO) and its corresponding diamine; urine samples were analysed (after hydrolysis) for the isocyanate-derived diamine. Processes that generated aerosols (as demonstrated by impinger analysis) such as spray painting and foam blowing were associated with the detection of diamines. Those processes that did not generate aerosols (casting, grouting, core making, and screeding) had no diamines detected, either in air or on gloves. In spray-painting tasks, diamines were a minor component (<15%) of the ambient concentration whereas in the foam blowing processes, where water is added to the process, diamine generation is more marked (up to eight times the airborne NCO concentration). Some non-aerosol processes gave rise to substantial diamine levels in urine (in exceedance of international guidance values, >5 µmol mol-1 creatinine) despite airborne levels being well within occupational exposure limits (20 µg m-3 total NCO in Great Britain); measurement data and statistical modelling indicated that skin absorption was the most likely exposure route. Foam blowing exposures were more complex, but urinary levels were greater than those expected from diisocyanate inhalation alone (measured as total NCO). This study provides evidence that biological monitoring for diisocyanates based on measuring the corresponding diamine in urine is valid, although any co-exposure to diamines themselves should be considered when interpreting results. It also demonstrates the potential for substantial skin absorption of diisocyanates in certain processes such as floor screeding and foam production., (© Crown Copyright 2017.)

Workers in the electroplating industry are potentially exposed to a range of hazardous substances including nickel and hexavalent chromium (chromium VI) compounds. These can cause serious health effects, including cancer, asthma and dermatitis. This research aimed to investigate whether repeat biological monitoring (BM) over time could drive sustainable improvements in exposure control in the industry. BM was performed on multiple occasions over 3 years, at 53 electroplating companies in Great Britain. Surface and dermal contamination was also measured, and controls were assessed. Air monitoring was undertaken on repeat visits where previous BM results were of concern. There were significant reductions in urinary nickel and chromium levels over the lifetime of this work in the subset of companies where initially, control deficiencies were more significant. Increased risk awareness following provision of direct feedback to individual workers and targeted advice to companies is likely to have contributed to these reductions. This study has shown that exposures to chromium VI and nickel in the electroplating industry occur via a combination of inhalation, dermal and ingestion routes. Surface contamination found in areas such as canteens highlights the potential for transferral from work areas, and the importance of a regular cleaning regime.

Array CGH for the detection of genomic copy number variants has replaced G-banded karyotype analysis. This paper describes the technology and its application in a clinical diagnostic service laboratory. DNA extracted from a patient's sample (blood, saliva or other tissue types) is labeled with a fluorochrome (either cyanine 5 or cyanine 3). A reference DNA sample is labeled with the opposite fluorochrome. There follows a cleanup step to remove unincorporated nucleotides before the labeled DNAs are mixed and resuspended in a hybridization buffer and applied to an array comprising ~60,000 oligonucleotide probes from loci across the genome, with high probe density in clinically important areas. Following hybridization, the arrays are washed, then scanned and the resulting images are analyzed to measure the red and green fluorescence for each probe. Software is used to assess the quality of each probe measurement, calculate the ratio of red to green fluorescence and detect potential copy number variants.