Rolland, Antoine, Sarda, Alain, Colomines, G., Chailleux, Emmanuel, Leroy, Eric, Laboratoire de génie des procédés - environnement - agroalimentaire (GEPEA), Institut Universitaire de Technologie - Nantes (IUT Nantes), Université de Nantes (UN)-Université de Nantes (UN)-Université de Nantes - UFR des Sciences et des Techniques (UN UFR ST), Université de Nantes (UN)-Université de Nantes (UN)-Institut Universitaire de Technologie Saint-Nazaire (IUT Saint-Nazaire), Université de Nantes (UN)-Ecole Polytechnique de l'Université de Nantes (EPUN), Université de Nantes (UN)-Ecole Nationale Vétérinaire, Agroalimentaire et de l'alimentation Nantes-Atlantique (ONIRIS)-Centre National de la Recherche Scientifique (CNRS)-Université Bretagne Loire (UBL)-IMT Atlantique Bretagne-Pays de la Loire (IMT Atlantique), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT)-Institut Universitaire de Technologie - La Roche-sur-Yon (IUT La Roche-sur-Yon), Université de Nantes (UN), Matrices Aliments Procédés Propriétés Structure - Sensoriel (GEPEA-MAPS2), Université de Nantes (UN)-Institut Universitaire de Technologie - Nantes (IUT Nantes), Matériaux pour Infrastructure de Transport (IFSTTAR/MAST/MIT), Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux (IFSTTAR)-PRES Université Nantes Angers Le Mans (UNAM), Université de Nantes - UFR des Sciences et des Techniques (UN UFR ST), Université de Nantes (UN)-Université de Nantes (UN)-IMT Atlantique Bretagne-Pays de la Loire (IMT Atlantique), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT)-Centre National de la Recherche Scientifique (CNRS)-Ecole Polytechnique de l'Université de Nantes (EPUN), Université de Nantes (UN)-Université de Nantes (UN)-Institut Universitaire de Technologie - Nantes (IUT Nantes), Université de Nantes (UN)-Institut Universitaire de Technologie Saint-Nazaire (IUT Saint-Nazaire), Université de Nantes (UN)-Institut Universitaire de Technologie - La Roche-sur-Yon (IUT La Roche-sur-Yon), Université de Nantes (UN)-Ecole Nationale Vétérinaire, Agroalimentaire et de l'alimentation Nantes-Atlantique (ONIRIS)-Université Bretagne Loire (UBL), Université de Nantes (UN)-Ecole Nationale Vétérinaire, Agroalimentaire et de l'alimentation Nantes-Atlantique (ONIRIS)-Université Bretagne Loire (UBL)-Université de Nantes - UFR des Sciences et des Techniques (UN UFR ST), Optimisation - Système - Energie (GEPEA-OSE), Institut Français des Sciences et Technologies des Transports, de l'Aménagement et des Réseaux (IFSTTAR), ANR-16-CE08-0017,ALGOROUTE,Transformation par liquéfaction hydrothermale de résidus de biomasse en vue de l'obtention d'un liant alternatif(2016), Colomines, Gaël, and Transformation par liquéfaction hydrothermale de résidus de biomasse en vue de l'obtention d'un liant alternatif - - ALGOROUTE2016 - ANR-16-CE08-0017 - AAPG2016 - VALID
International audience; The current worldwide consumption of bitumen is about 100 million tons. A remarkable combination of properties (adhesion, impermeability to water, specific thermo-rheological behavior) makes it a key material in road construction. Today's bitumen is mostly obtained from petroleum refining, so bioabased alternatives have to be explored for the future. The ALGOROUTE project funded by the French National Agency for Research (ANR) focuses on the use of hydrothermal liquefaction (HTL) process for the production of bitumen mimicking binders from microalgae biomass. HTL applied to microalgae is inspired by the geological process of petroleum formation, but on a very short time scale: For conditions around 260 °C / 50 bar, bitumen like products have been obtained by our consortium for residence times of about 1 hour [1] [2]. Beside temperature and pressure, the key parameters are the reaction time, algae/water ratio and loading level of reactor. In order to study the kinetics of bitumen formation, an experimental setup allowing fast heating and cooling rates has been developed. It consists of stirred pressure reactor (300mL) combined with an induction heating system and a water/air spray quenching. The cavity or the reactor is instrumented with a pressure sensor and 9 thermocouples for monitoring of the temperature field (Figure 1), with the objective of understanding the physical and chemical phenomena taking place during the process.Beside, the origin of the bitumen like behavior needs to be clarified. Using biomass from Spirulina microalgae, controlled HTL leads to an hydrophobic product composed of an oil phase and solid residues. The oil phase has a rheological behavior similar to that of a classical bitumen (Figure 2), while the whole hydrophobic product behaves like bitumens formulated with elastomer additives (Figure 2).