Search

High quality heteroepitaxial two-dimensional (2D) InSb layers are very difficult to realize owing to the large lattice mismatch with other widespread semiconductor substrates. A way around this problem is to grow free-standing 2D InSb nanostructures on nanowire (NW) stems, thanks to the capability of NWs to efficiently relax elastic strain along the sidewalls when lattice-mismatched semiconductor systems are integrated. In this work, we optimize the morphology of free-standing 2D InSb nanoflags (NFs). In particular, robust NW stems, optimized growth parameters, and the use of reflection high-energy electron diffraction (RHEED), to precisely orient the substrate for preferential growth, are implemented to increase the lateral size of the 2D InSb NFs. Transmission electron microscopy (TEM) analysis of these NFs reveals defect-free zinc blend crystal structure, stoichiometric composition, and relaxed lattice parameters. The resulting NFs are large enough to fabricate Hall-bar contacts with suitable length-to-width ratio enabling precise electrical characterization. An electron mobility of ~29,500 cm2/Vs is measured, which is the highest value reported for free-standing 2D InSb nanostrutures in literature. We envision the use of 2D InSb NFs for fabrication of advanced quantum devices., Comment: http://hdl.handle.net/11384/105250

The combination of core/shell geometry and band gap engineering in nanowire heterostructures can be employed to realize systems with novel transport and optical properties. Here, we report on the growth of InAs/InP/GaAsSb core-dual-shell nanowires by catalyst-free chemical beam epitaxy on Si(111) substrates. Detailed morphological, structural, and compositional analyses of the nanowires as a function of growth parameters were carried out by scanning and transmission electron microscopy and by energy-dispersive X-ray spectroscopy. Furthermore, by combining the scanning transmission electron microscopy-Moire technique with geometric phase analysis, we studied the residual strain and the relaxation mechanisms in this system. We found that InP shell facets are well-developed along all the crystallographic directions only when the nominal thickness is above 1 nm, suggesting an island-growth mode. Moreover, the crystallographic analysis indicates that both InP and GaAsSb shells grow almost coherently to the InAs core along the 112 direction and elastically compressed along the 110 direction. For InP shell thickness above 8 nm, some dislocations and roughening occur at the interfaces. This study provides useful general guidelines for the fabrication of high-quality devices based on these core-dual-shell nanowires., Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Crystal Growth and Design, copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/abs/10.1021/acs.cgd.9b01421

We report results on the control of barrier transparency in InAs/InP nanowire quantum dots via the electrostatic control of the device electron states. Recent works demonstrated that barrier transparency in this class of devices displays a general trend just depending on the total orbital energy of the trapped electrons. We show that a qualitatively different regime is observed at relatively low filling numbers, where tunneling rates are rather controlled by the axial configuration of the electron orbital. Transmission rates versus filling are further modified by acting on the radial configuration of the orbitals by means of electrostatic gating, and the barrier transparency for the various orbitals is found to evolve as expected from numerical simulations. The possibility to exploit this mechanism to achieve a controlled continuous tuning of the tunneling rate of an individual Coulomb blockade resonance is discussed., Comment: 7 pages, 5 figures, plus SI

We demonstrate high-temperature thermoelectric conversion in InAs/InP nanowire quantum dots by taking advantage of their strong electronic confinement. The electrical conductance G and the thermopower S are obtained from charge transport measurements and accurately reproduced with a theoretical model accounting for the multi-level structure of the quantum dot. Notably, our analysis does not rely on the estimate of co-tunnelling contributions since electronic thermal transport is dominated by multi-level heat transport. By taking into account two spin-degenerate energy levels we are able to evaluate the electronic thermal conductance K and investigate the evolution of the electronic figure of merit ZT as a function of the quantum dot configuration and demonstrate ZT ~ 35 at 30 K, corresponding to an electronic effciency at maximum power close to the Curzon- Ahlborn limit., Comment: 7 pages, 4 figures

Near-field imaging with terahertz (THz) waves is emerging as a powerful technique for fundamental research in photonics and across physical and life sciences. Spatial resolution beyond the diffraction limit can be achieved by collecting THz waves from an object through a small aperture placed in the near-field. However, light transmission through a sub-wavelength size aperture is fundamentally limited by the wave nature of light. Here, we conceive a novel architecture that exploits inherently strong evanescent THz field arising within the aperture to mitigate the problem of vanishing transmission. The sub-wavelength aperture is originally coupled to asymmetric electrodes, which activate the thermo-electric THz detection mechanism in a transistor channel made of flakes of black-phosphorus or InAs nanowires. The proposed novel THz near-field probes enable room-temperature sub-wavelength resolution coherent imaging with a 3.4 THz quantum cascade laser, paving the way to compact and versatile THz imaging systems and promising to bridge the gap in spatial resolution from the nanoscale to the diffraction limit.

We report the operation of a field-effect transistor based on a single InAs nanowire gated by an ionic liquid. Liquid gating yields very efficient carrier modulation with a transconductance value thirty time larger than standard back gating with the SiO2 /Si++ substrate. Thanks to this wide modulation we show the controlled evolution from semiconductor to metallic-like behavior in the nanowire. This work provides the first systematic study of ionic-liquid gating in electronic devices based on individual III-V semiconductor nanowires: we argue this architecture opens the way to a wide range of fundamental and applied studies from the phase-transitions to bioelectronics., Comment: 11 pages (abstract and bibliography included), 5 Figures

Nanoplasmonics exploits the coupling between light and collective electron density oscillations (plasmons) to bypass the stringent limits imposed by diffraction. This coupling enables confinement of light to sub-wavelength volumes and is usually exploited in nanostructured metals. Substantial efforts are being made at the current frontier of the field to employ electron systems in semiconducting and semimetallic materials since these add the exciting possibility of realizing electrically tunable and/or active nanoplasmonic devices. Here we demonstrate that a suitable design of the doping profile in a semiconductor nanowire (NW) can be used to tailor the plasmonic response and induce localization effects akin to those observed in metal nanoparticles. Moreover, by field-effect carrier modulation, we demonstrate that these localized plasmon resonances can be spatially displaced along the nanostructure body, thereby paving the way for the implementation of spatially tunable plasmonic circuits., Comment: 12 pages, 3 figures

We demonstrate an original method -- based on controlled oxidation -- to create high-quality tunnel junctions between superconducting Al reservoirs and InAs semiconductor nanowires. We show clean tunnel characteristics with a current suppression by over $4$ orders of magnitude for a junction bias well below the Al gap $\Delta_0 \approx 200\,\mu {\rm eV}$. The experimental data are in close agreement with the BCS theoretical expectations of a superconducting tunnel junction. The studied devices combine small-scale tunnel contacts working as thermometers as well as larger electrodes that provide a proof-of-principle active {\em cooling} of the electron distribution in the nanowire. A peak refrigeration of about $\delta T = 10\,{\rm mK}$ is achieved at a bath temperature $T_{bath}\approx250-350\,{\rm mK}$ in our prototype devices. This method opens important perspectives for the investigation of thermoelectric effects in semiconductor nanostructures and for nanoscale refrigeration., Comment: 6 pages, 4 color figures

We present a novel technique for the realization of suspended Josephson junctions based on InAs semiconductor nanowires. The devices are assembled using a technique of drop-casting guided by dielectrophoresis that allows to finely align the nanostructures on top of the electrodes. The proposed architecture removes the interaction between the nanowire and the substrate which is known to influence disorder and the orientation of the Rashba vector. The relevance of this approach in view of the implementation of Josephson junctions based on High-Temperature Superconductors is discussed., Comment: 8 pages, 5 figures

The control of orbital and spin state of single electrons is a key ingredient for quantum information processing, novel detection schemes, and, more generally, is of much relevance for spintronics. Coulomb and spin blockade (SB) in double quantum dots (DQDs) enable advanced single-spin operations that would be available even for room-temperature applications for sufficiently small devices. To date, however, spin operations in DQDs were observed at sub-Kelvin temperatures, a key reason being that scaling a DQD system while retaining an independent field-effect control on the individual dots is very challenging. Here we show that quantum-confined Stark effect allows an independent addressing of two dots only 5 nm apart with no need for aligned nanometer-size local gating. We thus demonstrate a scalable method to fully control a DQD device, regardless of its physical size. In the present implementation we show InAs/InP nanowire (NW) DQDs that display an experimentally detectable SB up to 10 K. We also report and discuss an unexpected re-entrant SB lifting as a function magnetic-field intensity.

The article presents a mapping of the residual strain along the axis of InAs/InSb heterostructured nanowires. Using confocal Raman measurements, we observe a gradual shift in the TO phonon mode along the axis of these nanowires. We attribute the observed TO phonon shift to a residual strain arising from the InAs/InSb lattice mismatch. We find that the strain is maximum at the interface and then monotonically relaxes towards the tip of the nanowires. We also analyze the crystal structure of the InSb segment through selected area electron diffraction measurements and electron diffraction tomography on individual nanowires., Comment: 14 pages, 5 figures

We study band alignment in wurtzite-zincblende polytype InAs heterostructured nanowires using temperature dependent resonance Raman measurements. Nanowires having two different wurtzite fractions are investigated. Using visible excitation wavelengths in resonance Raman measurements, we probe the electronic band alignment of these semiconductor nanowires near a high symmetry point of the Brillouin zone (E$_{1}$ gap). The strain in the crystal structure, as revealed from the shift of the phonon mode, explains the observed band alignment at the wurtzite-zincblende interface. Our experimental results are further supported by electronic structure calculations for such periodic heterostructured interface., Comment: 18 pages, 10 figures