Search

This study focused on the impact in 3T3 fibroblasts of several types of empty and curcumin- and resveratrol-loaded solid lipid nanoparticles (SLN) on cell viability and lipid metabolism in relation to their lipid content and encapsulated drug. SLN, prepared by hot homogenization/ultrasonication, were characterized with respect to size, polydispersity index, and zeta potential. Compritol® 888 ATO at different concentrations (4%, 5%, and 6% wt/wt) was chosen as lipid matrix while Poloxamer 188 (from 2.2% to 3.3% wt/wt) and Transcutol (TRC; 2% or 4%) were added as nanoparticle excipients. Prepared SLN were able to encapsulate high drug amount (encapsulation efficiency percentage of about 97-99%). All empty SLN did not show cytotoxicity (by MTT assay, at 24 h of incubation) in 3T3 cells independently of the lipid and TRC amount, while a viability reduction in the range 5-11% and 12-27% was observed in 3T3 cells treated with curcumin-loaded and resveratrol-loaded SLN, respectively. SLN without TRC did not affect cell lipid metabolism, independently from the lipid content. Empty and loaded SLN formulated with 4% of Compritol and 4% of TRC significantly affected, after 24 h of incubation at the dose of 5 μl/ml, cell polar lipids (phospholipids and free cholesterol) and fatty acid profile, with respect to control cells. Loaded compounds significantly modulated the impact of the corresponding empty formulation on cell lipids. Therefore, the combined impact on lipid metabolism of SLN and loaded drug should be taken in consideration in the evaluation of the toxicity, potential application, and therapeutic effects of new formulations.

Objectives The traditional manufacturing methods of solid oral dosage forms (SODFs) are reported to be time-consuming, highly expensive and not tailored to the patient’s needs. Three-dimensional printing (3DP) is an innovative emerging technology that can help to overcome these issues. The aim of this review is to describe the most employed 3DP technologies, materials and the state of the art on 3DP SODFs. Characterization techniques of 3DP SODFs, challenges and regulatory issues are also discussed. Key findings The interest in the investigation of the suitability of 3DP as an alternative strategy for the fabrication of SODFs is growing. Different 3DP technologies and starting materials have been investigated for the development of SODFs. Numerous SODFs with complex geometries and composition, and with different release patterns, have been successfully manufactured via 3DP. Despite that, just one 3DP SODF has reached the market. Summary 3DP can be a promising alternative to the classical SODFs manufacturing methods. However, numerous technically and regulatory challenges still need to be addressed in order 3DP to be extensively used in the pharmaceutical sector.

8-methoxypsoralen is the most common drug in psoralen plus ultraviolet light irradiation therapy for the treatment of severe psoriasis. Despite of the efficacy, its classic oral administration leads to several serious adverse effects. However, the topical psoralen application produces a drug skin accumulation lower than that obtained by oral administration, due to the drug low skin permeability. In this paper, 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles were prepared using soy phosphatidylcholine and the penetration enhancer Transcutol® (5% or 10%) and characterized in terms of size, polydispersity index, zeta potential and encapsulation efficiency. No statistically significant differences in both size (~135 nm) and encapsulation efficiency (~65%) were found for different Transcutol® concentration. Transdermal delivery study assessed by Franz diffusion cells, showed that the 8-methoxypsoralen mainly accumulated into the stratum corneum. Moreover, after Penetration Enhancer-containing Vesicles application, the drug recovered in this layer is almost double of that delivered by conventional liposomes, while no significant difference was found from the different Transcutol® concentrations. Finally, biocompatibility checked by an MTT assay, demonstrated that the incubation of human keratinocytes for 24 h with 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles did not significantly reduce cell viability.

The current study is a preliminary investigation on the use of stereolithography 3D printing technology in the field of personalized medicines and specifically for delivering drugs locally, which can for example usefully be applied to ear infections. The main aim is the development of drug-loaded implants for the treatment of ear diseases, to improve patient compliance and to overcome the limitations of current delivery approaches. Multiple prototypes of implant geometries have been created and printed using a flexible resin containing 0.5% w/v of Levofloxacin. Physicochemical characterization of the printed implants was carried out using a variety of techniques (e.g., microscopic, spectroscopic, and mechanical analysis). Finally, preliminary in vitro tests were performed to evaluate the release profile of Levofloxacin, the prototype implant's stability, and their antimicrobial property. The results obtained show that there is no interaction between the resin and the drug, which is perfectly solubilized in the device. In addition, the results of the mechanical tests show that the material used resists compression without compromising the design itself, and the diffusion test has shown that the drug diffused through the matrix prototype at 50% over 3 weeks. The selected designs showed higher antimicrobial activity on E. coli than on S. aureus.

The treatment strategy required for the effective healing of diabetic foot ulcer (DFU) is a complex process that is requiring several combined therapeutic approaches. As a result, there is a significant clinical and economic burden associated in treating DFU. Furthermore, these treatments are often unsuccessful, commonly resulting in lower-limb amputation. The use of drug-loaded scaffolds to treat DFU has previously been investigated using electrospinning and fused deposition modelling (FDM) 3D printing techniques; however, the rapidly evolving field of bioprinting is creating new opportunities for innovation within this research area. In this study, 3D-bioprinted scaffolds with different designs have been fabricated for the delivery of an antibiotic (levoflocixin) to DFU. The scaffolds were fully characterised by a variety of techniques (e.g. SEM, DSC/TGA, FTIR, and mechanical characterisation), demonstrating excellent mechanical properties and providing sustained drug release for 4 weeks. This proof of concept study demonstrates the innovative potential of bioprinting technologies in fabrication of antibiotic scaffolds for the treatment of DFU. Graphical abstract

8-methoxypsoralen is the most common drug in psoralen plus ultraviolet light irradiation therapy for the treatment of severe psoriasis. Despite of the efficacy, its classic oral administration leads to several serious adverse effects. However, the topical psoralen application produces a drug skin accumulation lower than that obtained by oral administration, due to the drug low skin permeability. In this paper, 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles were prepared using soy phosphatidylcholine and the penetration enhancer Transcutol® (5% or 10%) and characterized in terms of size, polydispersity index, zeta potential and encapsulation efficiency. No statistically significant differences in both size (~135 nm) and encapsulation efficiency (~65%) were found for different Transcutol® concentration. Transdermal delivery study assessed by Franz diffusion cells, showed that the 8-methoxypsoralen mainly accumulated into the stratum corneum. Moreover, after Penetration Enhancer-containing Vesicles application, the drug recovered in this layer is almost double of that delivered by conventional liposomes, while no significant difference was found from the different Transcutol® concentrations. Finally, biocompatibility checked by an MTT assay, demonstrated that the incubation of human keratinocytes for 24 h with 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles did not significantly reduce cell viability.

Topical psoralens plus ultraviolet A radiation (PUVA) therapy consists in the topical application of 8-methoxypsoralen (8-MOP) followed by the skin irradiation with ultraviolet A radiation. The employment of classical 8-MOP vehicles in topical PUVA therapy is associated with poor skin deposition and weak skin permeability of psoralens, thus requiring frequent drug administration. The aim of the present work was to formulate solid lipid nanoparticles (SLNs) able to increase the skin permeation of 8-MOP. For this purpose, the penetration enhancer Transcutol&reg, P (TRC) was added to the SLN formulation. SLNs were characterized with respect to size, polydispersity index, zeta potential, entrapment efficiency, morphology, stability, and biocompatibility. Finally, 8-MOP skin diffusion and distribution within the skin layers was investigated using Franz cells and newborn pig skin. Freshly prepared nanoparticles showed spherical shape, mean diameters ranging between 120 and 133 nm, a fairly narrow size distribution, highly negative &zeta, potential values, and high entrapment efficiency. Empty and loaded formulations were almost stable over 30 days. In vitro penetration and permeation studies demonstrated a greater 8-MOP accumulation in each skin layer after SLN TRC 2% and TRC 4% application than that after SLN TRC 0% application. Finally, the results of experiments on 3T3 fibroblasts showed that the incorporation of TRC into SLNs could enhance the cellular uptake of nanoparticles, but it did not increase their cytotoxicity.

Topical psoralens plus ultraviolet A radiation (PUVA) therapy consists in the topical application of 8-methoxypsoralen (8-MOP) followed by the skin irradiation with ultraviolet A radiation. The employment of classical 8-MOP vehicles in topical PUVA therapy is associated with poor skin deposition and weak skin permeability of psoralens, thus requiring frequent drug administration. The aim of the present work was to formulate solid lipid nanoparticles (SLNs) able to increase the skin permeation of 8-MOP. For this purpose, the penetration enhancer Transcutol® P (TRC) was added to the SLN formulation. SLNs were characterized with respect to size, polydispersity index, zeta potential, entrapment efficiency, morphology, stability, and biocompatibility. Finally, 8-MOP skin diffusion and distribution within the skin layers was investigated using Franz cells and newborn pig skin. Freshly prepared nanoparticles showed spherical shape, mean diameters ranging between 120 and 133 nm, a fairly narrow size distribution, highly negative ζ potential values, and high entrapment efficiency. Empty and loaded formulations were almost stable over 30 days. In vitro penetration and permeation studies demonstrated a greater 8-MOP accumulation in each skin layer after SLN TRC 2% and TRC 4% application than that after SLN TRC 0% application. Finally, the results of experiments on 3T3 fibroblasts showed that the incorporation of TRC into SLNs could enhance the cellular uptake of nanoparticles, but it did not increase their cytotoxicity.