Search

Damage to porous materials in heritage buildings caused by salt mixture crystallization is driven by the surrounding environmental conditions. To understand the crystallization behavior of a mixed salt solution as a function of changing climatic conditions (i.e., relative humidity and temperature), excluding factors such as the internal pore structure, the thermodynamic model ECOS/RUNSALT is the only freeware available that requires simple input and includes the most relevant ions for heritage buildings and solids. We suggest the use of specific terminology and describe how to use the model and how to interpret the output, with emphasis on key limitations for which solutions are provided. When used correctly, the model output can be trusted, specifically when it is used to inform preventive conservation (e.g., environmental conditions in which salt crystallization cycles should not occur). However, salt mixture kinetics and the internal pore structure remain crucial parameters that are not considered in the model. These aspects need further attention to develop a better understanding and correctly model salt damage in relation to climatic changes. [ABSTRACT FROM AUTHOR]

Salt weathering is one of the most important causes of deterioration in the built environment. Two crucial aspects need further investigation to understand the processes and find suitable measures: the impact of different climatic environments and the properties of salt mixture crystallization. We demonstrate the importance of kinetics in quantifying crystallization and dissolution cycles by combining droplet and capillary laboratory experiments with climate data analysis. The results proved that dissolution times for pure NaCl are typically slower than crystallization, while thermodynamic modelling showed a lower RHeq of NaCl (65.5%) in a salt mixture (commonly found in the built heritage) compared to its RHeq as a single salt (75.5%). Following the results, a minimum time of 30 min is considered for dissolution and the two main RHeq thresholds could be applied to climate data analysis. The predicted number of dissolution/crystallization cycles was significantly dependent on the measurement frequency (or equivalent averaging period) of the climatic data. An analysis of corresponding rural and urban climate demonstrated the impact of spatial phenomena (such as the urban heat island) on the predicted frequency cycles. The findings are fundamental to improve appropriate timescale windows that can be applied to climate data and to illustrate a methodology to quantify salt crystallization cycles in realistic environments as a risk assessment procedure. The results are the basis for future work to improve the accuracy of salt risk assessment by including the kinetics of salt mixtures. [ABSTRACT FROM AUTHOR]

Salt crystallization is recognized as a major cause of damage to porous building materials, threatening the sustainable preservation of our valuable built heritage. Unfortunately, the crystallization behavior of the detected salt mixtures is complex and not fully understood. While the deliquescence points of single salts are well documented, this is not the case for salts in a mixture where one is confronted with the presence of different cations and anions. In this paper the salt content of the murals and the limestone tracery of the main entrance porch from the sixteenth century church of St. James in Liège, Belgium is investigated and related to the climatic conditions of its environment. Concerning the salt load, the research consists of hygroscopic moisture content measurements, quantitative ion analyses, and the prediction of phase equilibria using the thermodynamic model ECOS/RUNSALT. This model can predict the salt crystallization sequences of a particular ion mixture. The output is mathematically evaluated with collected temperature and relative humidity data, which enables the calculation of the number of salt crystallization–deliquescence cycles. The results show that even small amounts of salts can cause damage over a long period of time when the environment causes frequent cycles of crystallization–deliquescence over time. It is shown how a mixture of small amounts of (double) salts, including hygroscopic ones, can have a significant effect on the decay of historic building materials in the case of daily changing climatic conditions and periods of extreme drought. As a result, the crystallization of double salts and hygroscopic salts such as calcium nitrate cannot be ignored. The scientific method and the results are described. [ABSTRACT FROM PUBLISHER]

The rehabilitation of historic buildings is a practice that aims to turn a historic property into a state of contemporary comfort for private or commercial use, while preserving its historic, architectural and cultural value, respecting items of authenticity, compatibility and sustainability. What once was a modest use of locally fired brick and mortar has become the subject of ambitious rehabilitation campaigns conforming to the rules of comfort and hygiene of the twenty-first century. A pre-investigation concerning the diagnosis of damage phenomena and the risk assessment of interventions is a crucial aspect for the success of a restoration campaign. The question of 'How to optimally preserve a monument within its current conditions' is replaced by 'How can a monument optimally perform in the conditions suited to the assigned rehabilitation project'. Today historic farms and their surroundings, after being abandoned for several decades, are the subject of different types of private or commercial rehabilitation projects. An example of such a project is the farm 'Hof De Pleyne' in Loppem (West-Flanders, Belgium). The project intended to integrate a restaurant kitchen into the former animal barn. The limits of salt content with respect to the desired rehabilitation facilities while respecting safety regulations are presented. [ABSTRACT FROM AUTHOR]

• A procedure for accumulating salts at the surface of porous materials is proposed. • Most of the salt is concentrated in the first millimetres of the subsurface. • The measurement of the salt distribution is crucial in salt crystallisation tests. The RILEM TC ASC-271 is developing a new laboratory test to assess the durability of porous building materials to salt crystallisation. The test encompasses two phases: salt accumulation and damage propagation. This paper focuses on designing a procedure for the accumulation phase; this is considered successful when salts crystallise at the material's evaporative surface (common situation observed on site) without the occurrence of damage. Two procedures were developed and tested on two limestones with different porosity: (1) capillary absorption of a salt solution followed by drying, and (2) continuous capillary absorption. Sodium chloride or sodium sulphate solutions were used. Several methods for assessing the salt distribution were employed: ultrasonic pulse velocity, drilling/scratching resistance, hygroscopic moisture content, ion chromatography, scanning electron microscopy, and micro X-ray fluorescence. The results enabled the selection of the most effective protocol for the salt accumulation phase. [ABSTRACT FROM AUTHOR]