Search

Ammonia (NH3) gas is prevalent in industrial production as a health hazardous gas. Consequently, it is essential to develop a straightforward, reliable, and stable NH3 sensor capable of operating at room temperature. This paper presents an innovative approach to modifying SnO2 colloidal quantum dots (CQDs) on the surface of Ti3C2Tx MXene to form a heterojunction, which introduces a significant number of adsorption sites and enhances the response of the sensor. Zero-dimensional (0D) SnO2 quantum dots and two-dimensional (2D) Ti3C2Tx MXene were prepared by solvothermal and in situ etching methods, respectively. The impact of the mass ratio between two materials on the performance was assessed. The sensor based on 12 wt% Ti3C2Tx MXene/SnO2 composites demonstrates excellent performance in terms of sensitivity and response/recovery speed. Upon exposure to 50 ppm NH3, the frequency shift in the sensor is −1140 Hz, which is 5.6 times larger than that of pure Ti3C2Tx MXene and 2.8 times higher than that of SnO2 CQDs. The response/recovery time of the sensor for 10 ppm NH3 was 36/54 s, respectively. The sensor exhibited a theoretical detection limit of 73 ppb and good repeatability. Furthermore, a stable sensing performance can be maintained after 30 days. The enhanced sensor performance can be attributed to the abundant active sites provided by the accumulation/depletion layer in the Ti3C2Tx/SnO2 heterojunction, which facilitates the adsorption of oxygen molecules. This work promotes the gas sensing application of MXenes and provides a way to improve gas sensing performance. [ABSTRACT FROM AUTHOR]

For a floating display system using a prism- or bead-type retroreflector, non-retroreflected light is the key cause of the deterioration in image resolution. In the present study, a micro aperture array was used to enhance the image resolution of aerial imaging displays based on prism and bead retroreflectors. The effects of different micro aperture parameters on the divergence angle of the retroreflector were experimentally studied, and the modulation of the point spread function of different retroreflectors was also explored in detail. The experimental results showed that by properly arranging the micro aperture array, the divergence angle of the retroreflective light could be effectively reduced. Moreover, the full width at half maximum of the point spread function of the retroreflector was effectively narrowed. Finally, after the modulation of the micro aperture array, the imaging resolution was increased by 115%-150% compared to the original resolution. The proposed micro array is low cost, easy to process, and flexible and can be applied to a retroreflector-based aerial imaging system to provide high image quality.