Search

In this work, we developed a novel approach for the preparation of molecularly imprinted polymer (MIP) coatings directly onto magnetic multicore nanoparticles (MMCs) using alternating magnetic fields to trigger the polymerization reaction. MIPs were synthesized with rhodamine 123 (R123) as model template molecule, methacrylic acid as functional monomer, and trimethylolpropane trimethacrylate as cross-linker. The amount of iron oxide nano particles and the composition of the polymerization mixture were optimized to enable the thermal polymerization of a thin MIP shell on each MMC using electromagnetic heating without altering the properties of the recognition layer. The thickness of the polymerized MIP layer grafted onto the MMCs was fine-tuned by adjusting the dose of electromagnetic field (101.4 kHz, total power dissipation = 105 W). The resulting magnetic multicore MIP nanoparticles (MMC-MIPs) were characterized by FT-R and X-ray diffraction spectroscopy, transmission electron microscopy, and dynamic light scattering.

Molecularly imprinted porous polymer microspheres selective to Alternaria mycotoxins, alternariol (AOH) and alternariol monomethyl ether (AME), were synthesized and applied to the extraction of both mycotoxins in food samples. The polymer was prepared using 4-vinylpiridine (VIPY) and methacrylamide (MAM) as functional monomers, ethylene glycol dimethacrylate (EDMA) as cross-linker and 3,8,9-trihydroxy-6 H -dibenzo[ b,d ]pyran-6-one (S2) as AOH surrogate template. A molecularly imprinted solid phase extraction (MISPE) method has been optimized for the selective isolation of the mycotoxins from aqueous samples coupled to HPLC with fluorescence (λ ex = 258 nm; λ em = 440 nm) or MS/MS analysis. The MISPE method was validated by UPLC–MS/MS for the determination of AOH and AME in tomato juice and sesame oil based on the European Commission Decision 2002/657/EC. Method performance was satisfactory with recoveries from 92.5% to 106.2% and limits of quantification within the 1.1–2.8 µg kg −1 range in both samples.

FLAG tag (DYKDDDDK) is a short peptide commonly used for the purification of recombinant proteins. The high price of the affinity columns and their limited reusability are a shortcoming for their widespread use in biotechnology applications. Molecularly imprinted polymers (MIPs) can circumvent some of the limitations of bioaffinity columns for such applications, including long-term stability, reusability, and cost. We report herein the synthesis of MIPs selective to the FLAG tag by hierarchical imprinting. Using the epitope imprinting approach, a 5-amino acid peptide DYKDC was selected as a template and was covalently immobilized on the surface of microporous silica beads, previously functionalized with different aminosilanes, namely, 3-(2-aminoethylamino)propyldimethoxymethylsilane, AEAPMS, and N-(2-aminoethyl)-2,2,4-trimethyl-1-aza-2-silacyclopentane, AETAZS. We investigated the effect of the type of silane on the production of homogeneous silane-grafted layers with the highest extent of silanol condensation as possible using 29Si CP/MAS NMR. We observed that the right orientation of the imprinted cavities can substantially improve analyte recoveries from the MIP. After template and silica removal, the DYKDC-MIPs were used as sorbents for solid-phase extraction (molecularly imprinted solid-phase extraction) of the FLAG peptide, showing that the polymer prepared with AETAZS-bound silica beads contained binding sites more selective to the tag (RMIP-AZA = 87.4% vs RNIP-AZA = 4.1%, n = 3, RSD ≤ 4.2%) than those prepared using AEAPMS (RMIP-DM = 73.4% vs RNIP-DM = 23.2%, n = 3, RSD ≤ 4.0%) as a functionalization agent. An extensive computational molecular modeling study was also conducted, shedding some light on the interaction mechanism between the FLAG peptide and the imprinted template in the binding cavities., This work was supported by the Spanish Ministry of Economy and Competitiveness (grant RTI2018-096410-B-C21). Wethank Prof. M. J. Torralvo for assistance with the N2adsorption experiments and the National Centre for Electron Microscopy and the Centre for Elemental Microanalysis(UCM, Madrid) for the technical support. N.G. thanks theSpanish Ministry of Economy and Competitiveness(MAT2016-81001-P project) and Dr. LevíLópez (Character-ization Service of ICTP-CSIC) for performing solid-stateNMR spectroscopy. Y.R. thanks Dr. Mihaly Mezei (Depart-ment of Pharmacological Sciences, Icahn School of Medicineat Mount Sinai) for critically reading the computational part ofthis manuscript and suggesting improvements. Computationswere supported in part through the computational resourcesand staffexpertise provided by the Scientific ComputingFacility at the Icahn School of Medicine at Mount Sinai.

Epitope tagging is widely used to fuse a known epitope to proteins for which no affinity receptor is available by using recombinant DNA technology. One example is FLAG epitope (DYKDDDDK), which provides better purity and recoveries than the favorite poly histidine tag. However, purification requires using anti-FLAG antibody resins, the high cost and nonreusability of which restrict widespread use. One cost-effective solution is provided by the use of bioinspired anti-FLAG molecularly imprinted polymers (MIPs). This work describes the development of MIPs, based on the epitope approach, synthesized from the tetrapeptide DYKD as template that affords purification of FLAG-derived recombinant proteins. Polymer was optimized by using a combinatorial approach to select the functional monomer(s) and cross-linker(s), resulting in the best specific affinity toward FLAG and the peptide DYKD. The imprinted resin obtained was used to purify mCherry proteins tagged with either FLAG or DYKD epitopes from crude cell lysates. Both mCherry variants were highly efficiently purified ( R ≥ 95%, RSD ≤ 15%, n = 3) and impurities were removed. Unlike existing antibody-based resins, the proposed tag-imprinting strategy provides a general method for meeting the growing demand for efficient, inexpensive, and versatile materials for tagged proteins purification.

Tenuazonic acid (TeA) is a common mycotoxin produced by Alternaria species found in various foodstuffs. Herein, we describe the preparation of porous molecularly imprinted polymer (MIP) microspheres doped with Eu(III), for selective fast analysis of TeA in rice extracts. The TeA template, bearing a β-diketone moiety, is a good Eu(III)-chelating antenna ligand that can be selectively captured in the MIP cavities and detected by observing the “turned-on” sensitized luminescence of the Eu(III) ions at 615 nm (λex 337 nm). A MIP library was prepared at small scale using diethyl allylmalonate (DEAM) or allyl acetoacetate as functional monomers, mixed in different mole ratios with the template and ethylene glycol dimethacrylate (EDMA) as cross-linker. The screening allowed selection of poly(DEAM-co-EDMA) with Eu(III) as luminogenic metal center for the sensor development. Under the optimized conditions, a linear response to TeA in the 1.7–20 μg mL−1 range, with a detection limit of 0.5 μg mL−1, was obtained. The Eu(III)-doped MIP for TeA showed very little or no cross-recognition of other mycotoxins present in foodstuff such as alternariol, β-zearalenol and cyclopiazonic acid, even containing the same recognition moiety. The MIP-based optosensor was successfully applied to the analysis of rice extracts spiked with TeA, and the results were confirmed by HPLC-DAD.

In this work, we report the synthesis of novel magnetic molecularly imprinted polymers (m-MIPs) and their application to the selective extraction of the mycotoxin citrinin (CIT) from food samples. The polymers were prepared by surface imprinting of Fe3O4 nanoparticles, using 2-naphtholic acid (2-NA) as template molecule, N-3,5-bis(trifluoromethyl)phenyl-N'-4-vinylphenyl urea and methacrylamide as functional monomers and ethyleneglycol dimethacrylate as cross-linker. The resulting material was characterized by transmission electron microscopy (TEM), and X-ray diffraction (XRD) and Fourier transform infrared spectroscopies (FT-IR). The polymers were used to develop a solid-phase extraction method (m-MISPE) for the selective recovery of CIT from rice extracts prior to its determination by HPLC with UV diode array detection. The method involves ultrasound-assisted extraction of the mycotoxin from rice samples with (7:3, v/v) methanol/water, followed by sample cleanup and preconcentration with m-MIP. The extraction (washing and elution) conditions were optimized and their optimal values found to provide CIT recoveries of 94-98 % with relative standard deviations (RSD) less than 3.4 % (n = 3) for preconcentrated sample extracts (5 mL) fortified with the analyte at concentrations over the range 25-100 μg kg(-1). Based on the results, the application of the m-MIPs facilitates the accurate and efficient determination of CIT in rice extracts.

This work describes the development and application of class-selective molecularly imprinted polymers (MIPs) for the analysis of beta-lactamase-resistant penicillins, namely cloxacillin (CLOXA), oxacillin (OXA), and dicloxacillin (DICLOXA), in milk samples. Our method is based on molecularly imprinted solid-phase extraction (MISPE) coupled to high-performance liquid chromatography (HPLC) with diode-array detection (DAD). 2-Biphenylylpenicillin (2BPEN), a surrogate with a close resemblance to beta-lactamase-resistant penicillins in terms of size, shape, hydrophobicity, and functionality, was synthesized and used as the template for the polymer synthesis. A MIP library was prepared and screened to select the optimum functional monomer, N-(2-aminoethyl)methacrylamide, and cross-linker, trimethylolpropane trimethacrylate, that provided the best recognition for the target antibiotics. For the MISPE application, the MIPs were prepared in the form of microspheres, using porous silica beads (40-75 μm) as sacrificial scaffolds. The developed MISPE method enables efficient extraction from aqueous samples and analysis of the antimicrobials, when followed by a selective washing with 2 mL acetonitrile-water (20:80 v/v) and elution with 1 mL 0.05 mol L(-1) tetrabutylammonium in methanol. The analytical method was validated according to EU guideline 2002/657/EC. The limits of quantification (S/N = 10) were in the 5.3-6.3 μg kg(-1) range, well below the maximum residue limits (MRLs) currently established. Inter-day mean recoveries were in the range 99-102 % with RSDs below 9 %, improving on the performance of previously reported MISPE methods for the analysis of CLOXA, OXA, or DICLOXA in milk samples.

A sensitive and reliable method using pressurised liquid extraction (PLE) followed by molecularly imprinted solid phase extraction (MISPE) and high performance liquid chromatography with fluorescence detection (HPLC–FLD) has been developed for the analysis of alternariol (AOH) and alternariol monomethyl ether (AME) in tomato samples. Influence of several extraction parameters that affect PLE efficiency were evaluated for the simultaneous extraction of both mycotoxins in the selected samples. AOH and AME were optimally extracted using MeOH/water (25:75, v/v) at 70°C as solvent, a pressure of 1000 psi and a single extraction cycle. The resulting PLE extracts were pre-concentrated by molecularly imprinted solid phase extraction (MISPE) cartridges followed of analysis by HPLC with fluorescence detection (λexc = 258, λem = 440 nm). The proposed method was applied to the analysis of AOH and AME in fortified tomato samples (20–72 µg· kg–1) with recoveries of 84–97% (RSD n = 6) for AOH and 67–91% (RSD n = 6) for AME. The detection limit for AOH and AME were 7 and 15 µg· kg–1, respectively. The ensuing PLE–MISPE–HPLC–FLD method was validated for the analysis of both mycotoxins in tomato samples in accordance with European Commission Decision 2002/657/EC.

This work reports the preparation of molecularly imprinted polymers (MIPs) selective to cephalosporin (CF) antibiotics, and their application as molecularly imprinted solid-phase extraction (MISPE) sorbents for the determination of these antimicrobials in milk samples. Several functional monomers and cross-linkers have been screened to select the best combination that provides high selectivity for the simultaneous multiresidue extraction of cefthiofur (THIO), cefazolin (AZO), cefquinome (QUI), cephapirin (API), cephalexin (ALE) and cephalonium (ALO) from the samples. The novel MIPs were prepared by a non-covalent imprinting approach in the form of spherical microparticles using the synthetic surrogate molecule sodium 7-(2-biphenylylcarboxamido)-3-methyl-3-cepheme-4-carboxylate, N-3,5-bis(trifluoromethyl)phenyl-N'-4-vinylphenyl urea (VPU) as functional monomer, and divinylbenzene (DVB) as crosslinking agent in a 1:2:20 molar ratio. The optimized MISPE method allowed the extraction of the target antimicrobials from raw cow milk samples using a selective washing with 5mL methanol/2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) buffer (0.1M, pH 7.5) (2:98, v/v) to remove the non-specifically retained compounds, followed by elution with 1mL of trifluoroacetic acid (TFA) in methanol (0.1:99.9, v/v). The extracts have been analysed by UHPLC-MS/MS and the analytical method has been validated according to EU guideline 2002/657/EC. The limits of quantification (S/N=10) were in the 1.7-12.5μgkg-1 range, well below the maximum residue limits (MRLs) currently established for the quantified cephalosporins in milk samples. The developed MIP allows mutiresidual determination of the six cephalosporin antibiotics mentioned above, significantly broadening the application to food analysis of MISPE methods.

Molecularly imprinted porous polymer microspheres have been prepared for selective binding of alternariol (AOH), a phenolic mycotoxin produced by Alternaria fungi. In order to lead the synthesis of recognition materials, four original AOH surrogates have been designed, prepared and characterized. They bear different number of phenol groups in various positions and different degree of O-methylation on the dibenzo[b,d]pyran-6-one skeleton. A comprehensive library of mixtures of basic, acidic or neutral monomers, with divinylbenzene or ethyleneglycol dimethacrylate as cross-linkers, were polymerized at a small scale in the presence of the four molecular mimics of the toxin molecule. This polymer screening has allowed selection of the optimal composition of the microbeads (N-(2-aminoethyl)methacrylamide, EAMA, and ethylene glycol dimethacrylate). The latter are able to bind AOH in water-acetonitrile (80:20, v/v) with an affinity constant of 109±10mM(-1) and a total number of binding sites of 35±2μmolg(-1), being alternariol monomethylether the only competitor species. Moreover, (1)H NMR titrations have unveiled a 1:2 surrogate-to-EAMA stoichiometry, the exact interaction sites and a binding constant of 1.5×10(4)M(-2). A molecularly imprinted solid phase extraction (MISPE) method has been optimized for selective isolation of the mycotoxin from aqueous samples upon a discriminating wash with 3mL of acetonitrile/water (20:80, v/v) followed by determination by HPLC with fluorescence detection. The method has been applied, in combination to ultrasound-assisted extraction, to the analysis of AOH in tomato samples fortified with the mycotoxin at five concentration levels (33-110μgkg(-1)), with recoveries in the range of 81-103% (RSD n=6). To the best of our knowledge, this is the first imprinted material capable of molecularly recognizing this widespread food contaminant.

[EN] Sub-wavelength diameter holes in thin metal layers can exhibit remarkable optical features that make them highly suitable for (bio)sensing applications. Either as efficient light scattering centers for surface plasmon excitation or metal-clad optical waveguides, they are able to form strongly localized optical fields that can effectively interact with biomolecules and/or nanoparticles on the nanoscale. As the metal of choice, aluminum exhibits good optical and electrical properties, is easy to manufacture and process and, unlike gold and silver, its low cost makes it very promising for commercial applications. However, aluminum has been scarcely used for biosensing purposes due to corrosion and pitting issues. In this short review, we show our recent achievements on aluminum nanohole platforms for (bio)sensing. These include a method to circumvent aluminum degradation-which has been successfully applied to the demonstration of aluminum nanohole array (NHA) immunosensors based on both, glass and polycarbonate compact discs supports-the use of aluminum nanoholes operating as optical waveguides for synthesizing submicron-sized molecularly imprinted polymers by local photopolymerization, and a technique for fabricating transferable aluminum NHAs onto flexible pressure-sensitive adhesive tapes, which could facilitate the development of a wearable technology based on aluminum NHAs., The authors gratefully acknowledge financial support from MINECO projects, Spain (TEC2012-31145, CTQ2012-37573-C02 and CTQ 2013-45875-R).