Search

Wireless power transfer (WPT) transmits electrical energy from a power source to an electrical load wirelessly or without any conductors. The capability of WPT to transmit the energy is limited. Therefore, a relay was introduced to increase the distance of the WPT capabilities. The effect of the relay has been investigated to extend the energy transfer distance. The effect of relay was demonstrated by placing a relay coil between transmitter and receiver, relay biased to transmitter and placing two relay coils in the designed system. Experimental results are provided to prove the concept of the relay effect. The power transmission efficiency can be achieved up to 75% at 1 meter distance.

In radio wave hyperthermia therapy, array antenna configuration was mainly studied to generate a small spot at the diseased part. Array antennas have the flexibility in controlling radiation performance, such as spot positions, by using their numerous radiating elements. However, the flexibility is achieved at the expense of antenna structure complexity. On the other hand, a lens antenna can concentrate radio waves into a small spot by forming a lens shape. The simplicity of a lens antenna structure lends itself to easy handling in a practical application. Moreover, the frequency independence of the lens antenna allows for a more flexible selection of hyperthermia therapy frequencies. Therefore, the lens antenna is selected as a focusing antenna in this paper. The lens shaping method and the temperature increment measurement are the main contents of this paper. The designed lens has a diameter of 30 cm, a focusing distance of 30 cm, and a working frequency of 2.45 GHz. A thin lens design method is applied to reduce lens weight. Firstly, the focusing ability of the designed lens is ensured by comparing the spot size results of electromagnetic (EM) simulation with its theoretical value. A spot size of 1.77 cm is obtained in both cases. Next, the temperature increment is examined by EM simulations. The temperature at the 2 cm tumor was increased to 41 °C from the human body temperature of 37 °C by an input power of 10 Watts (W). For the temperature increment measurement, a tumor within human body phantom is utilized and the available input power is reduced to 4 W. The tumor temperature increased from 21.5 °C of room temperature to 24.4 °C, which was captured by a thermal imaging camera. As a result, the functionality of the lens antenna for hyperthermia therapy is verified., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

In recent years, the development of healthcare monitoring devices requires high performance and compact in-body sensor antennas. A normal-mode helical antenna (NMHA) is one of the most suitable candidates that meets the criteria, especially with the ability to achieve high efficiency when the antenna structure is in self-resonant mode. It was reported that when the antenna was placed in a human body, the antenna efficiency was decreased due to the increase of its input resistance ( R in ). However, the reason for R in increase was not clarified. In this paper, the increase of R in is ensured through experiments and the physical reasons are validated through electromagnetic simulations. In the simulation, the R in is calculated by placing the NMHA inside a human's stomach, skin and fat. The dependency of R in to conductivity ( σ ) is significant. Through current distribution calculation, it is verified that the reason of the increase in R in is due to the decrease of antenna current. The effects of R in to bandwidth (BW) and electrical field are also numerically clarified. Furthermore, by using the fabricated human body phantom, the measured R in and bandwidth are also obtained. From the good agreement between the measured and simulated results, the condition of R in increment is clarified.

The incoming 5G technology requires antennas with a greater capacity, wider wireless spectrum utilisation, high gain, and steer-ability. This is due to the cramped spectrum utilisation in the previous generation. As a matter of fact, conventional antennas are unable to serve the new frequency due to the limitations in fabrication and installation mainly for smaller sizes. The use of graphene material promises antennas with smaller sizes and thinner dimensions, yet capable of emitting higher frequencies. Hence, graphene antennas were studied at a frequency of 15 GHz in both single and array elements. The high-frequency antenna contributed to a large bandwidth and was excited by coplanar waveguide for easy fabrication on one surface via screen printing. The defected ground structure was applied in an array element to improve the radiation and increase the gain. The results showed that the printed, single element graphene antenna produced an impedance bandwidth, gain, and efficiency of 48.64%, 2.87 dBi, and 67.44%, respectively. Meanwhile, the array element produced slightly better efficiency (72.98%), approximately the same impedance bandwidth as the single element (48.98%), but higher gain (8.41 dBi). Moreover, it provided a beam width of 21.2° with scanning beam capability from 0° up to 39.05°. Thus, it was proved that graphene materials can be applied in 5G.