Search

This study presents an approach to better characterize the P‐wave and S‐wave velocity structure of the seafloor sediment layer using ocean bottom seismometers. The presence of low‐velocity seafloor sediment layers influences the observed seismic record at the seafloor over a broad frequency range, such that detailed knowledge of this sediment structure is essential to predict its effect on teleseismic records. We use the radial component of teleseismic P waves and autocorrelation functions of the radial, vertical, and pressure components of teleseismic P and S waves to obtain sediment layer models using the Markov chain Monte Carlo approach with parallel tempering. Synthetic tests show that the body waves constrain the P‐ and S‐wave impedances and travel times and the P‐ to S‐wave velocity ratio of the sediment layers. The proposed method resolves thin layers at a high resolution, including the uppermost thin (∼50 m to a few hundred meters) low S‐wave velocity layer. Real data applications at sites across the Pacific Ocean that are coincident with previous in situ studies demonstrate the effectiveness of this method in characterizing the seafloor sediment unit. The sediment models characterized by this new approach will allow us to more accurately predict and correct the effects of sediment layers in generating P‐ and S‐wave reverberations. Plain Language Summary: Ocean bottom seismometers are powerful tools for investigating the detailed structure of the oceanic mantle. However, most ocean bottom seismometers are placed above the low‐velocity water‐saturated sediment layer, such that their seismic records are inevitably affected by this seafloor sediment layer. Detailed constraints on the structure of the seafloor sediment layer allow us to accurately predict its effects on the observed seismic records. The seafloor sediment layer may consist of multiple discontinuities and vary regionally. This study proposes a new approach for characterizing the seismic properties of the seafloor sediment layer using teleseismic body waves recorded at ocean bottom seismometers. Synthetic tests show that the method can resolve thin sublayers within the sediment layer, such as a very thin low shear‐wave velocity layer and sharp seismic velocity jumps. Real data applications show that the sediment models obtained using this approach are in good agreement with those obtained from direct measurements and previous body‐wave analyses. Our proposed method will enable more detailed prediction and correction of the influence of the sediment layer on ocean bottom seismometer records, thereby providing more accurate constraints on deeper Earth structures. Key Points: The seismic properties of the seafloor sediment layer are characterized using ocean bottom seismometer teleseismic body‐wave recordsThe P‐ and S‐wave impedances and travel times and the VP/VS values of each sublayer within the sediment layer are resolvedIn situ seafloor sediment structure constraints will enable accurate correction and prediction of shallow structure effects [ABSTRACT FROM AUTHOR]

This study presents reflectivity images of the northeast (NE) Japan subduction zone continuous across the ocean and land. As nearly half of its forearc region is under the ocean, data from ocean bottom seismometers (OBSs) must be utilized to fully image the region by passive seismic analysis. The use of OBS data has been a challenge due to inherent characters of the ocean bottom observations: high noise level and effects of seafloor sediment. Now, decent imaging is possible in NE Japan overcoming the high level noise due to the accumulated data set of the OBSs. The low‐velocity of seafloor sediment significantly delays and amplifies S waves passing through them, and thus complicates teleseismic waveforms. We identify and correct these effects to produce coherent receiver function images throughout the amphibious subduction zone. Our images provide a potential for discussing new structural features and will help better understanding of the dynamics of the NE Japan subduction zone. Plain Language Summary: In northeast Japan, the Pacific plate is subducting beneath the Japanese arc, and delineating how the actual subduction is taking place at depths has been the target of many seismological studies. This study presents our effort of continuous imaging of subsurface interfaces across the ocean and land employing an amphibious data set. On the land side, there are dense seismic networks that have been used to reveal the seismic interfaces using converted phases of distant earthquakes. On the ocean side, the accumulation of data from temporary ocean bottom seismometers in the last decade and the recently installed ocean bottom cable network has made it possible to use a similar approach as on the land. However, the low‐velocity sediment beneath the seafloor causes systematic slower arrivals and larger amplitudes of the seismic phases of interest that result in highly disturbed images if we analyze them in the same way as the land. Here, we identify and correct the effects of the seafloor sediment to analyze the seismic interfaces across the ocean and land. As a result, we succeed in imaging the interfaces of the subducting oceanic crust throughout the region, as well as previously unidentified features under the ocean that may deserve future investigation. Key Points: The northeast Japan subduction zone is imaged using receiver functions (RFs) of an amphibious data setWe identify significant amplitude and time delay effects on RFs from seafloor sedimentCorrections of the sediment effects significantly improve images across an amphibious region [ABSTRACT FROM AUTHOR]

We performed waveform inversion of the P waveforms recorded by our BroadBand Ocean Bottom Seismometers (BBOBSs) deployed in the Northwestern Pacific. Consequently, the depth profile of the P velocity of the oceanic upper mantle, which has not been well resolved by previous surface wave or receiver function analyses, was revealed. We considered the azimuthal anisotropy in the lithosphere, which significantly improved the variance reduction from 34% to 44%. The resulting P model exhibited higher and lower velocities in the lithosphere and asthenosphere, respectively. The velocity contrast was found to be second/third of that observed in the previous S models; however the obtained model appeared to have some trade‐off with the VS structures in the vicinity of the source. We compared our P model with the previous S model obtained using our BBOBSs and obtained the VP/VS model. The resulting VP/VS model has two notable features. First, the lithosphere is characterized by a rapid increase in the VP/VS values with depth, which implies chemical stratification. Second, the VP/VS values in the vicinity of the lithosphere‐asthenosphere boundary (LAB) are larger than the synthetic values of any major upper mantle mineral predicted by considering the anharmonic effects, which suggests the effects of anelasticity or melt. Key Points: We inverted P waveforms recorded by our BBOBSs to obtain the depth profile of the P velocity beneath the older Pacific plateCombining our P model with a previous S model revealed two notable features in Vp/VS structuresThe obtained Vp/Vs model suggests chemical stratification in the lithosphere and the effects of anelasticity or melt at the LAB [ABSTRACT FROM AUTHOR]

We investigate slab and mantle structure of the NE Japan subduction zone from P wave azimuthal and radial anisotropy using travel time tomography. Trench normal E-W-trending azimuthal anisotropy (AA) and radial anisotropy (RA) with VPV > VPH are found in the mantle wedge, which supports the existence of small-scale convection in the mantle wedge with flow-induced LPO of mantle minerals. In the subducting Pacific slab, trench parallel N-S-trending AA and RA with VPH > VPV are obtained. Considering the effect of dip of the subducting slab on apparent anisotropy, we suggest that both characteristics can be explained by the presence of laminar structure, in addition to AA frozen-in in the subducting plate prior to subduction. [ABSTRACT FROM AUTHOR]

Abstract: We report anomalous core phase PKPbc‐PKPdf differential travel times relative to 1‐D spherically symmetric model with a uniformly anisotropic inner core recorded by stations in Alaska for South Sandwich Islands (SSI) earthquakes. The data sample the inner core for the polar paths, as well as the lowermost mantle beneath Alaska. Our major observations are the following: (1) fractional travel time residuals of PKPbc‐PKPdf increase rapidly within 2 °, (2) a clear shift of the residual pattern could be seen for earthquakes with different locations, and (3) the residuals show systematic lateral variation: at the northern part, no rapid increase of residual can be seen. A structural boundary with a P wave velocity contrast of about 3% at the lowermost mantle beneath East Alaska is invoked to explain the observation, and the required strength of anisotropy in the quasi‐western hemisphere of the inner core might be reduced if those anomalous data are excluded from analysis. [ABSTRACT FROM AUTHOR]

Although plate tectonics started as a theory of the ocean basins nearly 50 years ago, the mechanical details of how it works are still poorly known. Our understanding of these details has been hampered partly by our inability to characterize the physical nature of the lithosphere-asthenosphere system (LAS) beneath the ocean. We review the existing observational constraints on the seismic and electrical properties of the LAS, particularly for normal oceanic regions away from mid-oceanic ridges, hot spots, and subduction zones, where plate tectonics is expected to present its simplest form. Whereas a growing volume of seismic data on land has provided remarkable advances in large-scale pictures, seafloor observations have been shedding new light on essential details. By combing through these observational constraints, researchers are unveiling the nature of the enigmatic LAS. Future directions for large-scale seafloor observations are also discussed. [ABSTRACT FROM AUTHOR]

Properties of a new parameter, ηκ, that is recently introduced by Kawakatsu et al. for transverse isotropy are examined. It is illustrated that the parameter nicely characterizes the incidence angle dependence of bodywave phase velocities for vertical transverse isotropy models that share the same P- and S-wave anisotropy. When existing models of upper-mantle radial anisotropy are compared in terms of this new parameter, PREM shows a distinct property. Within the anisotropic layer of PREM (a depth range of 24.4-220 km), ηκ < 1 in the upper half and ηκ > 1 in the lower half. If ηκ > 1, anisotropy cannot be attributed to a layering of homogeneous isotropic layers, and thus requires the presence of intrinsic anisotropy. [ABSTRACT FROM AUTHOR]

We constrain olivine fabrics in the oceanic lithosphere using active and passive seismic observations of Pn azimuthal anisotropy. We first analyze active‐source data derived from a broadband ocean bottom seismometer array that was deployed in the Northwestern Pacific. We infer the azimuthal dependence of the Pn velocity, including the 2ϕ and 4ϕ terms of the sinusoidal functions, where ϕ is the back azimuth. We observe a skewed azimuthal dependence of the Pn velocity, with a large peak‐to‐peak amplitude of about 12%. Similar features are observed using an independent data set of teleseismic Pn waves. We constrain the direction of the crystallographic axes of olivine to explain the observed azimuthal dependence and identify A‐type olivine with a slightly dipping a‐axis and slightly tilting b‐axis being compatible with our observations. In contrast, we find that D‐type olivine with any direction of crystallographic axes cannot explain our observations. Secondary deformation and recrystallization in the older Pacific may be responsible for this strong and complex seismic anisotropy in the study region. Plain Language Summary: Olivine is the most abundant mineral in the oceanic upper mantle and exhibits preferred crystallographic orientations when it experiences plastic strain‐induced deformation (Nicolas & Christensen, 1987, https://doi.org/10.1029/GD016p0111). Olivine in the oceanic lithosphere is considered to retain the orientations from its formation at the mid‐ocean ridge unless it experiences tectonic perturbations such as reheating by hotspot volcanisms. Seismic anisotropy observations in the oceanic lithosphere therefore provide clues to plate tectonics processes. In this study, we analyze two independent data sets (active‐ and passive‐source data) and reveal the detailed azimuthal dependence of the P velocity traversing the oceanic lithosphere in the northwestern Pacific. We find that the two data sets consistently show a strong and skewed anisotropic signal. We infer that secondary deformation and recrystallization in the Pacific Plate may be responsible for these observations. Key Points: Strong and skewed azimuthal dependence of Pn velocity is robustly observedCompatible direction of the crystallographic axes of olivine is constrainedSecondary deformation and recrystallization in the older Pacific is suggested [ABSTRACT FROM AUTHOR]

Inversion for seismological structures of the oceanic lithosphere–asthenosphere system is important to understand the mechanisms of plate tectonics. Previous models of the oceanic upper mantle have been primarily obtained via global tomography using surface waveforms. However, besides scarcity of waveform data in the oceanic regions, difficulties in fitting phases for shorter-period components in the previous global tomography have yielded resultant models that possess poor resolutions above |$\sim \, 50$| km depth. Recent developments of broad-band ocean-bottom seismometer (BBOBS) arrays provide larger amount of seismic data with epicentral distances of <20°. In this study, we develop an appropriate method to fully utilize the information contained in the shorter-period components of BBOBS arrays. We first fit the envelopes without phase information to analyse the shorter-period components (8–60 s) which are generally unavailable in the conventional phase fitting. We then use the resultant model as our initial model for waveform inversion of the longer periods (12.5–200 s) to fit the phase, which allows us to infer a continuous structure model from the crust to the asthenosphere. We demonstrate the validity of this combined envelope-fitting and waveform inversion method by analysing the waveform data from a BBOBS array that was deployed in the Northwestern Pacific and has recorded events in the vicinity of the Japan Trench to obtain the average velocity structure between the event and station arrays. We independently resolve the crustal compressional and shear wave velocities, and thickness by analysing the envelopes, which minimizes biases in the subsequent waveform inversion. We also find that the waveform inversion improves the resolution in the asthenosphere. Our results suggest that further extension of this method should improve our knowledge of the oceanic lithosphere–asthenosphere system. [ABSTRACT FROM AUTHOR]

The hemispherical nature of heterogeneities of the isotropic velocity and attenuation of the inner core has been extensively studied by seismic observations, but consensus on the character of the boundary between two hemispheres has not yet been achieved. To investigate the hemispherical boundary in detail, we analyze core phase data whose ray paths propagate beneath the northern Pacific. We employ a waveform inversion approach based on simulated annealing to measure the differential traveltime and the attenuation parameter of the core phases. Measured differential traveltimes for data from European stations for events in the Fiji-Tonga region show positive anomalies consistent with the eastern hemisphere model, while those from USArray for events in Indonesia show relatively small values. Ray-theory based forward modeling of the differential traveltimes is conducted by varying the shape and the transition width of the boundary. An arc-like shape boundary that connects points (0°N, 159°W) on the equator and (79°N, 110°E) in far north with a transition width of ∼600 km best explains the observed differential traveltimes rather than a sharp boundary. This model also accounts for the observed variation of attenuation parameters. • The nature of hemispherical boundary of the inner core beneath the northern Pacific was investigated. • Core phase data were analyzed via a non-linear waveform inversion method. • Forward modeling of the differential traveltime anomaly was conducted for constraining the boundary. • The arc-like-shaped boundary with ∼600 km-wide velocity transition was observed. [ABSTRACT FROM AUTHOR]

We present a new reference model for the evolution of oceanic lithosphere, which incorporates the effects of incomplete viscous relaxation, radiogenic heating, and secular cooling. The new reference model is based solely on thermal conduction, that is, without involving the occurrence of small‐scale convection, and unlike the plate model, it does not contain unphysical boundary conditions. Yet, our model can explain both bathymetry and the heat flow data on the normal seafloor. The success of the new model owes to the use of realistic material properties in conduction modeling as well as the consideration of all of major processes that take place ubiquitously beneath seafloor. The effect of secular cooling on the bathymetry of old seafloor is particularly notable. Whereas secular cooling brings only weak temperature variations with an amplitude of ∼20 K, it can nonetheless affect global bathymetry substantially owing to the deep sensitivity of long‐wavelength topography kernels. We suggest that the well‐known fact that Earth has been cooling, which was not considered in any of previous reference models, may be the key to the long‐standing puzzle of seafloor flattening. The new reference model is expected to be useful to better quantify the impact of the emplacement of hotspot islands and oceanic plateaus, the effect of small‐scale convection, and the regional history of secular cooling in the convecting mantle. Plain Language Summary: Seafloor deepens as it moves away from mid‐ocean ridges, and this subsidence reflects how the suboceanic mantle loses its heat by conduction. When seafloor becomes older than 70 million years old, however, it starts to deviate upward from what is predicted by the simple law of thermal conduction. A common approach to model such a deviation is to adopt the so‐called plate model, which can suppress seafloor subsidence with a constant temperature boundary condition at a shallow depth (120–140 km), although the real Earth does not contain such a boundary. Here we show that, by taking into account all of major processes intrinsic to the suboceanic mantle, from the cold shallow part to the hotter deep part, it is possible to explain the evolution of seafloor topography as well as heat loss, without invoking an unphysical boundary condition. In particular, this study illustrates that the fact that Earth is cooling, which is long known in Earth sciences, can have considerable effects on the large‐scale behavior of ocean basins. Key Points: A new reference model for the evolution of normal oceanic lithosphere is proposedThe model is based solely on thermal conduction and yet free of unphysical boundary conditionsThe model incorporates the effects of incomplete viscous relaxation, radiogenic heating, and secular cooling [ABSTRACT FROM AUTHOR]

We analyze seismic records collected at the oldest (170–180 Ma) Pacific seafloor using broadband dispersion array analysis. Using ambient noise and teleseismic waveforms, we measure Rayleigh‐wave phase velocities in a period range of 5–200 s that are inverted for array‐average one‐dimensional isotropic and azimuthally anisotropic shear‐wave velocity depth profiles from the crust to a depth of 300 km. The high‐velocity Lid and the low‐velocity zone are well‐resolved with velocity difference of ∼4%, whose transition occurs at depths between 80 and 100 km. The profile is compared with that obtained at the 130‐ and 140‐Ma seafloor. Accounting for the cooling effect due to the plate age difference, the low‐velocity zone of the oldest Pacific seafloor is ∼1.3% slower (∼110°C warmer) than that beneath the 140‐Ma seafloor, suggesting the occurrence of some reheating process beneath the oldest lithosphere. The azimuthal anisotropy at shallow depths (<50 km) is significantly different between the western and eastern areas of the array where the peak‐to‐peak amplitudes are estimated to be ∼2.8% and ∼1.6%, respectively. The fast direction is nearly parallel to the past seafloor spreading direction (perpendicular to the magnetic lineation) in the west, while it largely deviates in the east. The observed difference in azimuthal anisotropy may represent complicated evolution dynamics of the infant Pacific plate that involved a ridge‐ridge‐ridge triple junction. Plain Language Summary: One of the classical enigmas of plate tectonics is the cause of seafloor flattening where the seafloor depth becomes nearly constant for old ages (>∼70 Ma) while a simple cooling model of plate evolution predicts the age dependence. To solve this enigma, it is essential to resolve the subsurface structure of the oceanic plate and the asthenosphere below. As a part of an international effort, Pacific Array, that aims to cover the Pacific seafloor by arrays of ocean bottom seismometers, a team of Japanese and Korean scientists deployed an array in the oldest (170–180 Ma) Pacific seafloor. We determine isotropic and anisotropic shear‐wave velocity structures as a first step toward resolving the enigma. The results indicate that the asthenosphere beneath the oldest Pacific lithosphere is significantly slower than the prediction of the simple cooling and that the occurrence of some reheating process may be needed. Furthermore, azimuthal anisotropy (the dependence of the wave velocity on the horizontal propagation direction) in the shallow lithosphere shows that the anisotropy patterns differ between the eastern and western areas of the array, and simulation results indicate that the evolution process of the infant Pacific plate is not merely a simple triangular plate spreading. Key Points: Broadband Rayleigh‐wave dispersion array analysis has been conducted in the oldest (∼170 Ma) Pacific seafloorThe low‐velocity zone is significantly slower to indicate the occurrence of some reheating process beneath the oldest Pacific lithosphereThe spatial variation of the shallow azimuthal anisotropy indicates a complicated evolution of the infant Pacific plate [ABSTRACT FROM AUTHOR]

Investigation of fluid distribution along megathrust faults is an important issue, since the fluid affects frictional properties and thus slip behavior on faults. Scattered teleseismic phases, or receiver functions (RFs), have made significant contributions to understanding the fluid content of subducting plates beneath the onshore regions but have been rarely applied in offshore settings. In this study, we conducted receiver function inversion analysis to investigate detailed seismic properties near the megathrust fault using ocean bottom seismometers deployed off the Kii Peninsula, southwest Japan. RFs were calculated at high frequencies (up to 4 Hz), removing the effect of water reverberations from vertical component records. Our inversion was performed in two steps: first, we modeled sediment layer by a simple stacking method and then solved for deeper structure by a waveform inversion. The results indicate the presence of a thin low-velocity zone (LVZ) of a thickness of 0.2-1.2 km with a S wave velocity of 0.7-2.4 km/s along the plate interface. We interpret this LVZ as thin fluid-rich sediment layer between the overriding and subducting plates that acts as a pathway of fluid migration. [ABSTRACT FROM AUTHOR]

High frequency energy radiation of large earthquakes is a key to evaluating shaking damage and is an important source characteristic for understanding rupture dynamics. We developed a new inversion method, Image Deconvolution Back-Projection (IDBP) to retrieve high frequency energy radiation of seismic sources by linear inversion of observed images from a back-projection approach. The observed back-projection image for multiple sources is considered as a convolution of the image of the true radiated energy and the array response for a point source. The array response that spreads energy both in space and time is evaluated by using data of a smaller reference earthquake that can be assumed to be a point source. The synthetic test of the method shows that the spatial and temporal resolution of the source is much better than that for the conventional back-projection method. We applied this new method to the 2001 M w 7.8 Kunlun earthquake using data recorded by Hi-net in Japan. The new method resolves a sharp image of the high frequency energy radiation with a significant portion of supershear rupture. [ABSTRACT FROM AUTHOR]

Strong long‐period seismic signals at periods around 25 and 18 s appear in the ambient noise cross‐correlation functions recorded by an array of ocean bottom seismometers (OBSs) in the western‐central Pacific. The signal amplitude varies from time to time, and the apparent travel times of the signals are typically smaller than those expected for the Rayleigh waves propagating along the great circle connecting the station pairs. From the cross‐correlation functions, the signal sources are located in the Vanuatu Arc. Local data analysis suggests the signals originate from two different sources possibly located at depths of ~0–1 km below the sea level beneath the active cones of Ambrym volcano. Plain Language Summary: Spatially localized sources that persistently generate long‐period seismic waves at periods longer than 10 s are reported worldwide. For some sources, the excitation mechanisms have been well‐investigated. A volcano in Japan generates such waves that travel more than thousands of kilometers. For others, however, the excitation origins are still poorly understood. These include the one observed in the Vanuatu Arc. A temporal observation network of seismometers installed on the seafloor in the western‐central Pacific observed persistent waves peaking at around two different periods. From the data analysis, we find the signals originate from an active volcano, Ambrym volcano, in the Vanuatu Arc. Besides, we find that those seismic waves are most likely originated from two different sources possibly located at shallow depths beneath the volcano. Key Points: Persistent long‐period (25 and 18 s) seismic signals appear in ambient noise cross‐correlations of OBS data in the western‐central PacificThe signals are originated from Ambrym volcano in the Vanuatu ArcSource locations of the two signals may be different, but both are possibly located at shallow depths right beneath the active cones [ABSTRACT FROM AUTHOR]

We found that SH diff phases generated by earthquakes in the Fiji–Tonga, recorded in India, are accompanied by secondary pulses. We interpreted them as a consequence of multipathing of S waves caused by the Pacific large low-shear-velocity province (LLSVP). We analysed the differential traveltimes between SH diff and the secondary pulse, together with the absolute SH diff arrival times, to constrain the thickness and velocity perturbations in the western end of the Pacific LLSVP. Our preferred model shows a lateral variation in the thickness of the LLSVP; the southern part reveals a thicker (300 km) low-velocity region compared to the northern part (200 km). However, the velocity perturbations of the LLSVP appear to be comparable (⁠|$-1.5\hbox{ per cent}$|⁠). The results are consistent with a scenario that the LLSVP is a chemically distinct pile with significant surface topography. [ABSTRACT FROM AUTHOR]

We measured shear wave splitting from SKS data recorded by the transcontinental NECESSArray in NE China to constrain lithosphere deformation and sublithospheric flows beneath the area. We selected several hundreds of high quality SKS/SKKS waveforms from 32 teleseismic earthquakes occurring between 09/01/2009 and 08/31/2011 recorded by 125 broadband stations. These stations cover a variety of tectonic terranes, including the Songliao basin, the Changbaishan mountain range and Zhangguancai range in the east, the Great Xing'an range in the west and the Yanshan orogenic belt in the southwest. We assumed each station is underlaid by a single anisotropic layer and employed a signal-to-noise ratio (SNR) weighted multi-event stacking method to estimate the two splitting parameters (the fast polarization direction φ , and delay time, δt ) that gives the best fit to all the SKS/SKKS waveforms recorded at each station. Overall, the measured fast polarization direction lies more or less along the NW–SE direction, which significantly differs from the absolute plate motion direction, but is roughly consistent with the regional extension direction. This suggests that lithosphere deformation is likely the general cause of the observed seismic anisotropy. The most complicated anisotropic structure is observed beneath the southern Great Xing'an range and southwest Songliao basin. The observed large variations in splitting parameters and the seismic tomographic images of the area are consistent with ongoing lithospheric delamination beneath this region. [ABSTRACT FROM AUTHOR]

We used ambient noise data recorded by the NECESSArray, a portable seismic array deployed in Northeast China, to construct Rayleigh-wave phase velocity dispersion curves and obtain phase velocity maps for periods from 6 to 40 s. S-wave velocity structure beneath NE China is obtained by joint inversion of the phase velocities and receiver functions. Our results show good correlation between crustal velocity structure and geological features. At shallow depths the Songliao Basin is separated into two small sub-basins by a fast velocity anomaly corresponding to a southwest uplifted horst and the southern sub-basin is associated with the Kailu depression. A low-velocity anomaly extending from the lower-crust to uppermost mantle beneath the Changbaishan mountain range is consistent with P- and S-wave tomography models. The mantle low velocity has been interpreted as a local mantle upwelling attributed to the subducting Pacific slab induced return flow. Finally, the S-wave velocity in the mid-and-lower crust is lower beneath the Xing'an–Mongolia Orogenic Belt (XMOB) than beneath the Changbaishan mountain range. This was not expected since the Changbaishan mountain range has experienced more extensive volcanic activity in the Cenozoic, including the currently active Changbaishan and Jingpohu volcanoes, than the XMOB. We infer that the mid-and-lower crust of the XMOB is mainly felsic in composition and propose that the low shear-wave velocity of the mid-and-lower crust beneath the XMOB could be the consequence of removal of deep mafic crust through a continental accretion and subsequent delamination event in the Paleozoic, or via convection removal induced by the rollback of the flat subducted Paleo-Pacific slab during the middle Mesozoic. [ABSTRACT FROM AUTHOR]

In order to better understand the deep subduction geometry of the Pacific plate and genesis of intraplate volcanism in northeast China (NE China), we computed a total of 45,505 receiver functions from 788 teleseismic events recorded by 255 stations (NECESSArray temporal and permanent stations) in NE China. We used a common-conversion-point stacking (CCP) method to generate a 3D reflectivity volume beneath the study area. To position the P-to-S conversions to the correct depths, we employed 3D crustal and mantle models as references to make time to depth conversion. The 3D reflectivity volume was generated in an area between 115°–135°E and 40°–49°N, in the depth range of 300 to 800 km. We found significant topographic relief on the 660-km discontinuity across the study area. In particular, in a westward Pacific plate subduction section between 40°N and ∼45.5°N, the 660-km discontinuity is depressed by as much as ∼30–40 km along the western extension of the deep seismicity. The depression is elongated along the strike of the deep seismicity and is confined to a 200–300 km region in the E–W direction of subduction. To the west of this depression the 660-km discontinuity is uplifted by 5–10 km in a rectangular area of ∼100 km by 200 km centered at about 125°E and 43°N. In the north, the 660-km discontinuity is moderately depressed (∼20 km) in a broad area that extends further west. The high and low regions in the 660-km topographic map correlate, respectively, with low- and high-velocity anomalies in the P- and S-wave tomographic velocity images at the same depth. Our results suggest that slab stagnation might not be occurring in the southern part of the NE China, where the Changbaishan volcanic complex is located, thus the magmatism is unlikely caused by dehydration of the flat-lying Pacific slab in the transition zone. The low velocity mantle upwelling arising from a gap of stagnant slabs is a likely source that feeds the volcanic complex in NE China. [ABSTRACT FROM AUTHOR]

Abstract: We analyzed tens of thousands of receiver-function data recorded by 185 broadband seismic stations to study the crustal structure beneath the northeast China. Moho depth and average crustal ratio were measured at each station using the H–κ grid searching technique. For stations located above unconsolidated sediments, we applied the H–β method to remove strong shallow reverberations and generate subsurface receiver functions that allow for effective H–κ analysis. The measurements show that the Songliao basin has a relatively thin crust (∼31 km), and the Moho depth increases significantly from southeast (∼27 km) to northwest (∼35 km). The northwestward tilting of the Songliao basin may suggest that it was initiated by lithospheric flexure due to the load of the Great Xing'an range in the Jurassic before the large-scale extension in the Cretaceous. Moho depth varies from 26.7 km to 42.3 km across the study area, with the shallowest and deepest Moho being located at the eastern flank of the Songliao basin and the Great Xing'an range, respectively. The Moho depth correlates well with the surface topography in the western part, but not the central and eastern parts of the study area. The residual topography computed based on the Airy's isostasy model indicates that the high topography at the eastern flank of the Songliao basin, the Changbaishan volcanic center, and the southern end of the Great Xing'an range is likely dynamically supported by the upper mantle. [Copyright &y& Elsevier]