Search

The objective of the study was to identify accessions of T. tuberosum with highest quantities of thiocyanates, starches and sugars. The study was performed in Cevallos, Ecuador. Six accessions were cultivated in six individual plots and processed. The Yellow, White and Purple accessions were exposed to sunlight for periods of 3, 6 and 9 days. The resulting biomass was analysed: The Purple variety presented the greatest quantity of thiocyanates (663 mg/100g) after three days' exposure. Meanwhile, the Yellow variety showed the highest amount of starches (47%) and total sugars in freshly-harvesting. The results reveal the potential of these accessions as a source of starch and thiocyanate. [ABSTRACT FROM AUTHOR]

Foodborne pathogens represent a significant cause of negative impacts on human health and the economy worldwide. Unfortunately, information about epidemiological insights in Latin American countries is scarce. The consumption of ready-to-eat street food in Ecuador is extensive, and information about the presence of foodborne pathogens, their virulence factors, and antimicrobial resistance is negligible. This data includes the occurrence, phenotypic antibiotic resistance profiles, and antibiotic resistance genes of Enterobacterales isolated from ready-to-eat street food in Ambato, central Ecuador during 2020 and 2021. The most common genera detected were Escherichia coli , Klebsiella spp. , and Cronobacter spp . Agar disk diffusion assays were performed to determine their phenotypic resistance. The presence of antibiotic resistance genes conferring resistance against colistin, β-Lactams, aminoglycosides, tetracyclines, sulfonamides, fluoroquinolones, and amphenicols was detected via polymerase chain reaction (PCR) amplification., Competing Interests: No competing interests were disclosed., (Copyright: © 2022 Tubón J et al.)

Although anthropogenic activities contribute to the selection and spread of antibiotic resistance in aquatic environments, limited information is available from countries with absent or incomplete sewage treatment systems and the impact of their discharges onto water bodies. This study therefore aimed to characterize the genetic structure of colistin resistance (mcr) genes among Escherichia coli isolates recovered from surface waters and sediments in Ecuador. Out of 459 isolates, four Escherichia coli showed multidrug-resistant phenotypes, which harbored the mcr-1 gene and β-lactamases, such as bla TEM , bla CTX-M-15 , bla CTX-M-55 , or bla CTX-M-65 genes. Three E. coli isolates (U20, U30 and U144) shared a similar genetic environment surrounding the mcr-1 gene, which was located on plasmids. Only one E. coli isolate (U175) showed that the mcr-1 gene was chromosomally located. Moreover, the core genome multilocus sequence typing (cgMLST) analysis revealed that these isolates belong to different lineages. This study represents the first detection of the mcr-1 gene in multidrug-resistant E. coli isolates from environmental samples in Ecuador., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

We processed three quinoa ecotypes as they are commonly consumed in a daily diet. For the treatments, quinoa seeds were washed, cooked, and/or germinated. Following treated, we used 1 H NMR-based metabolomic profiling to explore differences between the ecotypes. Then, for a non-targeted and targeted food fingerprint analysis of samples, we performed multivariable data analyses, including principal component analysis (PCA), orthogonal partial least squares discriminant analysis (OPLS-DA), and hierarchical cluster analysis. From our study, we were able to discriminate each quinoa ecotype regardless of treatment based on its metabolomic profiling. Additionally, we were able to identify 30 metabolites that were useful to determine the effect of each treatment on nutritional composition. Germination increased the content of most metabolites irrespective of ecotype. In general, ecotype CQE_03 was different from ecotypes CQE_01 and CQE_02. Our phytochemical analysis revealed the effects of washing, cooking, and/or germination, particularly on saponins content., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Background: Given the considerable role played by Salmonella in the incidence of food poisoning around the world, surveillance of this infection is prioritized by both food producers and health care authorities. Data remains insufficient concerning the prevalence of Salmonella in poultry systems in Ecuador and in Latin America in general. Methods: In this study we evaluated the prevalence and diversity of Salmonella serovars in samples taken from 21 layer farms and backyard layers in central Ecuador during August-November 2017.   Salmonella was isolated following standardized methods (ISO 6579) and the serovar determination was carried out by PCR. Results: A significant presence of Salmonella was detected, with an incidence of 76% (95% confidence interval (CI): 58-94) in farms, 33% (95%CI: 13-53) in pooled cloacal swabs from layer hens, 33% (95%CI: 12-55) on feed samples, and 10% (95%CI: 0-22) in backyard layer feces from traditional local markets. The dominant serovars detected were S. Infantis and S. Typhimurium. Conclusions: This study forms a basis for further surveillance of Salmonella serovars in layer farms in central Ecuador., Competing Interests: No competing interests were disclosed.

The anticancer compound podophyllotoxin and other related lignans can be produced in Linum album in vitro cultures, although their biosynthesis varies according to the degree of differentiation of the plant material. In general, L. album cell cultures do not form the same lignans as roots or other culture systems. Our aim was to explore how the lignan-producing capacity of organogenic cell masses is affected by the conditions that promote their formation and growth. Thus, L. album biomass obtained from plantlets was cultured in darkness or light, with or without the addition of plant growth regulators, and the levels of podophyllotoxin, methoxypodophyllotoxin and other related lignans were determined in each of these conditions. The organogenic capacity of the cell biomass grown in the different conditions was studied directly and also with light and scanning electronic microscopy, leading to the observation of.several somatic embryos and well-formed shoots. The main lignan produced was methoxypodophyllotoxin, whose production was clearly linked to the organogenic capacity of the cell biomass, which to a lesser extent was also the case for podophyllotoxin., (Copyright © 2018 Elsevier GmbH. All rights reserved.)

Linum album is a herbaceous plant with medical interest due to its content of podophyllotoxin (PTOX), an aryltetralin lignan with cytotoxic activity. Previous studies in our laboratory showed that cell suspension cultures of L. album produced more PTOX than methoxypodophyllotoxin (6-MPTOX), both lignans being formed from the same precursor after divergence close to the end of the biosynthetic pathway. In contrast, the hairy roots produced more 6-MPTOX than PTOX. Taking into account this variability, we were interested to know if the lignan profile of an in vitro PTOX-producing L. album plant changes according to the biotechnological system employed and, if so, if this is due to cell dedifferentiation and/or transformation events. With this aim, we established four biotechnological systems: (1) Wild type cell suspensions, (2) transformed cell suspensions, (3) adventitious roots and (4) hairy roots. We determined the production of four aryltetralin lignans: PTOX, 6-MPTOX, deoxypodophyllotoxin (dPTOX) and β-peltatin. The results show that in vitro plantlets, WT cells and transformed cells predominantly produced PTOX, production being 11-fold higher in the plantlets. Otherwise, the adventitious and hairy roots predominantly produced 6-MPTOX, the adventitious roots being the most productive, with MPTOX levels 1.58-fold higher than in transformed roots. We can infer from these results that in the studied plants, cell differentiation promoted the formation of 6-MPTOX over PTOX, while transformation did not influence the lignan pattern., (Copyright © 2018 Elsevier GmbH. All rights reserved.)

Background: Plant biofactories are biotechnological platforms based on plant cell and organ cultures used for the production of pharmaceuticals and biopharmaceuticals, although to date only a few of these systems have successfully been implemented at an industrial level. Metabolic engineering is possibly the most straightforward strategy to boost pharmaceutical production in plant biofactories, but social opposition to the use of GMOs means empirical approaches are still being used. Plant secondary metabolism involves thousands of different enzymes, some of which catalyze specific reactions, giving one product from a particular substrate, whereas others can yield multiple products from the same substrate. This trait opens plant cell biofactories to new applications, in which the natural metabolic machinery of plants can be harnessed for the bioconversion of phytochemicals or even the production of new bioactive compounds. Synthetic biological pipelines involving the bioconversion of natural substrates into products with a high market value may be established by the heterologous expression of target metabolic genes in model plants., Objective: To summarize the state of the art of plant biofactories and their applications for the pipeline production of cosme-, pharma- and biopharmaceuticals., Results: In order to demonstrate the great potential of plant biofactories for multiple applications in the biotechnological production of pharmaceuticals and biopharmaceuticals, this review broadly covers the following: plant biofactories based on cell and hairy root cultures; secondary metabolite production; biotransformation reactions; metabolic engineering tools applied in plant biofactories; and biopharmaceutical production., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

Background: Bioactive plant secondary metabolites have complex chemical structures, which are specific to each plant species/family, and accumulate in tiny amounts. The growing market demand for many phytochemicals can lead to the over-harvesting of medicinal plants in their natural habitat, endangering species in the process., Objective: An ongoing challenge for our society is therefore to develop a bio-sustainable production of phytochemicals, among other natural resources. Cancer is currently a major health problem, responsible for approximately 8.2 million deaths per year worldwide. We therefore focused this review on cancer therapeutic agents from plants and their biotechnological production., Method and Results: An extensive review of the literature shows that although a wide range of phytochemicals have demonstrated anti-proliferative activity in vitro, only a few examples of plant-based drugs are included in the Anatomical Therapeutic Chemical (ATC) classification as antineoplastic agents. These include vinca alkaloids and their derivatives (L01CA), podophyllotoxin derivatives (L01CB), and paclitaxel and its derivatives (L01CD), as well as camptothecin derivatives (L01XX). These compounds all have in common a complex chemical structure, a scarce distribution in nature, and a high added value. After describing the chemical structures, natural sources and biological activities of these anticancer compounds, we focus on the state of the art in their biotechnological production in plant cell biofactories., Conclusion: More in-depth studies are required on the biosynthesis of target plant metabolites and its regulation in order to increase their biotechnological production in plant cell factories and ultimately implement these biosustainable processes at an industrial level.