Search

Microstructural design is a widespread approach to tailor the properties of functional materials with the size effect being an effective constraint that modifies physical phenomena. In this work, we investigate the grain size effect on the properties and the electric field induced phase transformation behavior in barium titanate. A broad range of unimodal average grain size distribution between 0.4 and 15 μm was successfully sintered avoiding abnormal grain growth. Samples with a grain size close to the range of 1–2 μm, balancing microstructural strain, presence, and mobility of domain walls to allow the field induced crystal phase transformation, showed optimal electromechanical and dielectric properties. By means of in situ high energy x-ray diffraction and a high-resolution multianalyzer detector, we distinguish and quantify a tetragonal–orthorhombic phase transformation induced by an electric field, providing unambiguous proof of this induced phase transformation. These results contribute to the understanding of fundamental questions about the piezoelectric effect in barium titanate and consequently other similar systems. [ABSTRACT FROM AUTHOR]

BiFeO3–BaTiO3 (BF–BT) solid solutions exhibit great promise as the basis for high temperature piezoelectric transducers and energy storage dielectrics, but the fundamental mechanisms governing their functional properties require further clarification. In the present study, both pure and niobium-doped 0.7BF–0.3BT ceramics are synthesized by solid state reaction and their structure–property relationships are systematically investigated. It is shown that substituting a low concentration of Ti with Nb at a level of 0.5 at% increases the resistivity of BF–BT ceramics and facilitates ferroelectric switching at high electric field levels. Stable planar piezoelectric coupling factor values are achieved with a variation from 0.35 to 0.45 over the temperature range from 100 to 430 °C. In addition to the ferroelectric-paraelectric phase transformation at the Curie point (∼430 °C), a frequency-dependent relaxation of the dielectric permittivity and associated loss peak are observed over the temperature range from −50 to +150 °C. These effects are correlated with anomalous enhancement of the remanent polarization and structural (rhombohedral) distortion with increasing temperature, indicating the occurrence of a re-entrant relaxor ferroelectric transformation on cooling. The results of the study provide new insight into the thermal evolution of structure and the corresponding functional properties in BF–BT and related solid solutions. [ABSTRACT FROM AUTHOR]

A series of morphotropic phase boundary (MPB) compositions of (1–x)Na1/2Bi1/2TiO3‐xBaTiO3 (x = 0.05, 0.055, 0.06, 0.065, 0.07), with and without 0.5 mol% Zn‐doping was synthesized using the solid‐state route. The samples were characterized using X‐ray diffraction, dielectric analysis, and electromechanical measurements (piezoelectric d33 coefficient, coupling factor kp, mechanical quality factor Qm, and internal bias field Ebias). The increase in the ferroelectric‐relaxor transition temperature upon Zn‐doping was accompanied by a shift of the MPB toward the Na1/2Bi1/2TiO3‐rich side of the phase diagram. Higher tetragonal phase fraction and increased tetragonal distortion were noted for Zn‐doped (1 – x)Na1/2Bi1/2TiO3‐xBaTiO3. In addition, ferroelectric hardening and the presence of an internal bias field (Ebias) were observed for all doped compositions. The piezoelectric constant d33 and the coupling coefficient kp decreased by up to ∼30%, while a 4‐ to 6‐fold increase in Qm was observed for the doped compositions. Apart from establishing a structure–property correlation, these results highlight the chemically induced shift of the phase diagram upon doping, which is a crucial factor in material selection for optimal performance and commercialization. [ABSTRACT FROM AUTHOR]

A series of morphotropic phase boundary (MPB) compositions of (1–x)Na1/2Bi1/2TiO3‐xBaTiO3 (x = 0.05, 0.055, 0.06, 0.065, 0.07), with and without 0.5 mol% Zn‐doping was synthesized using the solid‐state route. The samples were characterized using X‐ray diffraction, dielectric analysis, and electromechanical measurements (piezoelectric d33 coefficient, coupling factor kp, mechanical quality factor Qm, and internal bias field Ebias). The increase in the ferroelectric‐relaxor transition temperature upon Zn‐doping was accompanied by a shift of the MPB toward the Na1/2Bi1/2TiO3‐rich side of the phase diagram. Higher tetragonal phase fraction and increased tetragonal distortion were noted for Zn‐doped (1 – x)Na1/2Bi1/2TiO3‐xBaTiO3. In addition, ferroelectric hardening and the presence of an internal bias field (Ebias) were observed for all doped compositions. The piezoelectric constant d33 and the coupling coefficient kp decreased by up to ∼30%, while a 4‐ to 6‐fold increase in Qm was observed for the doped compositions. Apart from establishing a structure–property correlation, these results highlight the chemically induced shift of the phase diagram upon doping, which is a crucial factor in material selection for optimal performance and commercialization. [ABSTRACT FROM AUTHOR]

Quenching from sintering temperature enhances the depolarization temperature (Td) in Na1/2Bi1/2TiO3-based ceramics without significant deterioration of piezoelectric properties (d33). In this work, quenching effects in an ergodic relaxor 0.97(0.94Na0.5Bi0.5TiO3–0.06BaTiO3)–0.03AgNbO3 (NBT–6BT–3AN) were investigated based on structure, ferroelectric, and dielectric properties. The ergodicity to nonergodicity transition was obtained by quenching NBT–6BT–3AN above 1000 °C. The temperature stability of the quenching-induced nonergodicity was examined by annealing the quenched sample at 300 °C and 600 °C. The effect of oxygen vacancy on ergodicity to nonergodicity transition was investigated by comparing ferroelectric and electrostrain responses of the quenched and nitrogen-atmosphere-annealed samples. The influence of quenching on the structure including the average crystal structure, phase fraction and lattice distortion and the local structure including bond lengths and ordering of ions was analyzed. The ergodicity to nonergodicity transition upon quenching is ascribed to the contribution of the off-centered Bi3+ ions and ordered local structure. [ABSTRACT FROM AUTHOR]

Piezoelectric applications such as ultrasonic motors, transformers and therapeutic ultrasonics demand high power generation with low losses, which is facilitated by "hard" ferroelectrics. Hardening of piezoelectric properties, characterized by high mechanical quality factor (Qm), is usually achieved by doping with lower valence elements, thereby tailoring the domain wall dynamics. In the present study, we demonstrate a hardening mechanism by developing composites of 0.94(Na1/2Bi1/2)TiO3-0.06BaTiO3 (NBT-6BT) with ZnO inclusions, as an alternative to chemical modifications. A decrease in the saturation polarization and total strain, higher internal bias fields, lower hysteretic losses and a two-fold increase in Qm are observed in comparison to NBT-6BT. The composite with 0.1 mole ratio of ZnO exhibits the highest Qm of 320 with d33=125 pC/N and Kp=0.29. A one-to-one correspondence between the increase in Qm and the decrease in the domain wall mobility is established from the ac field dependence of permittivity, in the framework of the Rayleigh law. A further increase in ZnO content beyond a mole ratio of 0.1 reduces Qm, but retains it at a higher level, as compared to NBT-6BT. The results are explained based on the poling-induced strain incompatibility between the matrix and the hard ZnO phase. This composite approach is therefore considered a generic hardening concept and can be extended to other ferroelectric systems. [ABSTRACT FROM AUTHOR]

Methicillin-resistant Staphylococcus aureus (MRSA) has been a global health concern since the 1960s, and isolation of this pathogen from food-producing animals has been increasing. However, little information is available on the prevalence of MRSA and its clonal characteristics in seafood and the aquatic environment. In this study, 267 seafood and aquatic environment samples were collected from three districts of Kerala, India. Staphylococcal protein A (spa) typing and multilocus sequence typing (MLST) was performed for 65 MRSA strains isolated from 20 seafood and aquatic environment samples. The MRSA clonal profiles were t657-ST772, t002-ST5, t334-ST5, t311-ST5, t121-ST8, t186-ST88, t127-ST1, and two non-spa assignable strains. Whole spa gene sequence analysis along with MLST confirmed one strain as t711-ST6 and another as a novel MRSA clone identified for the first time in seafood and the aquatic environment with a t15669 spa type and a new MLST profile of ST420-256-236-66-82-411-477. The MRSA strains were clustered into five clonal complexes based on the goeBURST algorithm, indicating high diversity among MRSA strains in seafood and the aquatic environment. The novel clone formed a separate clonal complex with matches to three loci. This study recommends large-scale spa typing and MLST of MRSA isolates from seafood and the aquatic environment to determine the prevalence of new MRSA clones. This monitoring process can be useful for tracing local spread of MRSA isolates into the seafood production chain in a defined geographical area. [ABSTRACT FROM AUTHOR]

The lattice strain and domain switching behavior of xBiScO3-(1-x)PbTiO3 (x=0.40) was investigated as a function of cyclic field and grain orientation by in situ X-ray diffraction during application of electric fields. The electric field induced 200 lattice strain was measured to be five times larger than the 111 lattice strain in pseudorhombohedral xBiScO3-(1-x)PbTiO3 (x=0.40). It is shown that the anomalous 200 lattice strain is not an intrinsic phenomenon, but arises primarily due to stress associated with the reorientation of the 111 domains in dense polycrystalline ceramic. [ABSTRACT FROM AUTHOR]

High-performance piezoelectric materials constantly attract interest for both technological applications and fundamental research. The understanding of the origin of the high-performance piezoelectric property remains a challenge mainly due to the lack of direct experimental evidence. We perform in situ high-energy x-ray diffraction combined with 2D geometry scattering technology to reveal the underlying mechanism for the perovskite-type lead-based high-performance piezoelectric materials. The direct structural evidence reveals that the electric-field-driven continuous polarization rotation within the monoclinic plane plays a critical role to achieve the giant piezoelectric response. An intrinsic relationship between the crystal structure and piezoelectric performance in perovskite ferroelectrics has been established: A strong tendency of electric-field-driven polarization rotation generates peak piezoelectric performance and vice versa. Furthermore, the monoclinic MA structure is the key feature to superior piezoelectric properties as compared to other structures such as monoclinic MB, rhombohedral, and tetragonal. A high piezoelectric response originates from intrinsic lattice strain, but little from extrinsic domain switching. The present results will facilitate designing high-performance perovskite piezoelectric materials by enhancing the intrinsic lattice contribution with easy and continuous polarization rotation. [ABSTRACT FROM AUTHOR]

Quorum sensing (QS) is a type of cell to cell communication in bacteria that can also regulate the virulence potential in pathogenic strains. Hence, QS disruption, i.e. the quorum quenching (QQ) mechanism, is presently being explored as a novel bio-control strategy to counter bacterial infections. In the present study, we characterized the QQ ability of Bacillus spp. strains to reduce the expression of some virulence factors of a shrimp pathogen, Vibrio harveyi. We screened a total of 118 spore-forming bacterial isolates from aquaculture ponds and mangrove soil for their ability to degrade the synthetic N-acyl-homoserine lactones (AHLs) C4-HSL, C6-HSL, C8-HSL, and C10-HSL. We then selected the top 17 isolates with high AHL-degradation ability for further study. Among them, B. subtilis MFB10, B. lentus MFB2, and B. firmus MFB7 had the highest ability for degradation. These 3 isolates suppressed the expression of virulence genes encoding protease, lipase, phospholipase, caseinase, chitinase, and gelatinase, and potentially inhibited the biofilm formation of V. harveyi MFB32. The reduction in expression of virulence genes like those coding for metalloprotease, serine protease, and haemolysin were confirmed by real-time PCR analysis. Moreover, in an in vivo challenge experiment, these Bacillus spp. protected Penaeus monodon post-larvae against V. harveyi MFB3 infection. Our results demonstrate the potential application of AHL-degrading Bacillus spp. as an alternative to antibiotics in shrimp hatcheries to control luminescent vibriosis. This novel bio-therapeutic method is a promising approach towards disease control in shrimp aquaculture.

Luminescent Vibrio harveyi is common in sea and estuarine waters. It produces several virulence factors and negatively affects larval penaeid shrimp in hatcheries, resulting in severe economic losses to shrimp aquaculture. Although V. harveyi is an important pathogen of shrimp, its pathogenicity mechanisms have yet to be completely elucidated. In the present study, isolates of V. harveyi were isolated and characterized from diseased Penaeus monodon postlarvae from hatcheries in Kerala, India, from September to December 2016. All 23 tested isolates were positive for lipase, phospholipase, caseinase, gelatinase and chitinase activity, and 3 of the isolates (MFB32, MFB71 and MFB68) showed potential for significant biofilm formation. Based on the presence of virulence genes, the isolates of V. harveyi were grouped into 6 genotypes, predominated by vhpA+ flaB+ ser+ vhh1- luxR+ vopD- vcrD+ vscN-. One isolate from each genotype was randomly selected for in vivo virulence experiments, and the LD50 ranged from 1.7 ± 0.5 × 103 to 4.1 ± 0.1 × 105 CFU ml-1. The expression of genes during the infection in postlarvae was high in 2 of the isolates (MFB12 and MFB32), consistent with the result of the challenge test. However, in MFB19, even though all genes tested were present, their expression level was very low and likely contributed to its lack of virulence. Because of the significant variation in gene expression, the presence of virulence genes alone cannot be used as a marker for pathogenicity of V. harveyi.

A disease outbreak in 42-d-old black tiger shrimp Penaeus monodon juveniles from a commercial aquaculture farm in Kerala, India, was investigated. The cause of the disease outbreak was confirmed as Vibrio parahaemolyticus by biochemical tests, PCR targeting the toxR gene and pathogenicity testing of the isolates. All of the isolates tested negative by PCR specific for V. parahaemolyticus associated with acute hepatopancreatic necrosis disease (AHPND), implicating vibriosis unrelated to AHPND as the cause of mortality. Among the 19 isolates obtained, 2 possessed the tdh gene (coding for thermo-stable hemolysin), whereas none of the isolates possessed trh. The LD50 value of 8 isolates of V. parahaemolyticus from diseased and apparently healthy shrimp ranged from 2.7 × 104 to 4.9 × 105 CFU ml-1 by immersion challenge of P. monodon postlarvae. BOX-PCR and dendrogram analysis of the bacterial isolates revealed that the isolates from moribund and apparently healthy shrimp formed separate clusters, indicating that these isolates originate from separate clones. The isolates from moribund shrimp including tdh-positive V. parahaemolyticus clustered together. The present study represents the first report of tdh-positive V. parahaemolyticus causing disease in a shrimp farm.

The prevalence of Listeria monocytogenes in the retail fish markets of the Kerala, India was investigated by screening 227 samples comprising of marine finfish (n = 97) shellfish (n = 19), ready-to-cook fish products (n = 47), ready-to-eat fish products (n = 10), dried fish (n = 11) and retail ice (n = 43). The prevalence of L. monocytogenes and L. innocua was 2·7% and 17·2% respectively. Sample category wise, prevalence of L. monocytogenes was higher in marine finfish (1·8%) and retail ice (0·9%). All the L. monocytogenes isolates carried virulent genes namely inlA, inlC, inlJ, hlyA, iap, plcA, prfA genes and majority (82%) belonged to 1/2a, 3a serogroups. L. monocytogenes isolates were multidrug-resistant and showed resistance to ampicillin, penicillin, erythromycin, tetracycline and clindamycin. Enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC-PCR) delineated 58% genetic heterogeneity among the L. monocytogenes strains. The study reports that genetic similarities of the isolates were interlinked to their serogroup and sample origin. SIGNIFICANCE AND IMPACT OF THE STUDY: Prevalence of Listeria monocytogenes, in the retail fish markets of Kerala, India was low but their relatively higher presence in marine finfish and retail ice and virulent nature of the isolates signifies food safety concerns. Moreover, multidrug-resistant nature of these isolates may potentially lead to spread of antimicrobial resistance. This study identified retail ice as a vehicle for entry of L. monocytogenes in retail fish and hence, there is a need to ensure quality of retail ice used for maintaining the cold-chain., (© 2019 The Society for Applied Microbiology.)

Viral pathogens appear to exert the most significant constraints on the growth and survival of crustaceans under culture conditions. The prevalence of viral pathogens White Spot Syndrome Virus (WSSV), Hepatopancreatic Parvo Virus (HPV), Monodon Baculo Virus (MBV) and Infectious Hypodermal and Hematopoietic Necrosis Virus (IHHNV) in Penaeus monodon post-larvae was studied. Samples collected from different hatcheries and also samples submitted by farmers from Kerala were analyzed. Out of 104 samples collected, WSSV was detected in 12.5% of the post-larvae samples. Prevalence of concurrent infections by HPV, MBV and WSSV (either dual or triple infection) was present in 60.6% of the total post-larvae tested. Out of the 51 double positives, 98% showed either HPV or IHHNV infection. HPV or IHHNV was detected in 11 post-larval samples showing triple viral infection. This is the first report of IHHNV from India. Result of this study reveals the lack of efficient screening strategies to eradicate viruses in hatchery reared post-larvae.

The Vembanad Lake located on the south-west coast of India, an ecological hotspot is the nursing ground of many economically important crustaceans. The prevalence of white spot syndrome virus (WSSV) among crustaceans from farmed, estuarine and marine environments surrounding the Vembanad Lake, India was detected using PCR. A total of 308 samples from aquaculture ponds consisting of six species of crustaceans collected from five different farms were tested for the presence of WSSV. Of these, 67% were found to carry the virus. A total of 258 samples of crustaceans from the Cochin backwater system that forms a part of the Vembanad lake viz., Metapenaeus dobsoni, Metapenaeus monoceros, Penaeus monodon and Penaeus indicus were found to contain WSSV in 62% of the samples. Fifteen species of crustaceans caught from the seas off Cochin were also screened for the presence of WSSV. Out of these, twelve species had WSSV incidence levels ranging from 6-23%. WSSV was not detected from three species of deep sea crustaceans tested. The black tiger shrimp, Penaeus monodon had the highest incidence of WSSV among the species screened in farmed, estuarine and marine environments.