Search

Radio map (RM) is a promising technology that can obtain pathloss based on only location, which is significant for 6G network applications to reduce the communication costs for pathloss estimation. However, the construction of RM in traditional is either computationally intensive or depends on costly sampling-based pathloss measurements. Although the neural network (NN)-based method can efficiently construct the RM without sampling, its performance is still suboptimal. This is primarily due to the misalignment between the generative characteristics of the RM construction problem and the discrimination modeling exploited by existing NN-based methods. Thus, to enhance RM construction performance, in this paper, the sampling-free RM construction is modeled as a conditional generative problem, where a denoised diffusion-based method, named RadioDiff, is proposed to achieve high-quality RM construction. In addition, to enhance the diffusion model's capability of extracting features from dynamic environments, an attention U-Net with an adaptive fast Fourier transform module is employed as the backbone network to improve the dynamic environmental features extracting capability. Meanwhile, the decoupled diffusion model is utilized to further enhance the construction performance of RMs. Moreover, a comprehensive theoretical analysis of why the RM construction is a generative problem is provided for the first time, from both perspectives of data features and NN training methods. Experimental results show that the proposed RadioDiff achieves state-of-the-art performance in all three metrics of accuracy, structural similarity, and peak signal-to-noise ratio. The code is available at https://github.com/UNIC-Lab/RadioDiff.

Orbital angular momentum (OAM) has attracted much attention for radio vortex wireless communications due to the orthogonality among different OAM-modes. To maintain the orthogonality among different OAM modes at the receiver, the strict alignment between transmit and receive antennas is highly demanded. However, it is not practical to guarantee the transceiver alignment in wireless communications. The phase turbulence, resulting from the misaligned transceivers, leads to serious inter-mode interference among different OAM modes and therefore fail for signals detection of multiple OAM modes at the receiver. To achieve practical OAM based wireless communications, in this paper we investigate the radio vortex wireless communications with misaligned transmit and receive antennas. We propose a joint Beamforming and Pre-detection (BePre) scheme, which uses two unitary matrices to convert the channel matrix into the equivalent circulant matrix for keeping the orthogonality among OAM-modes at the receiver. Then, the OAM signals can be detected with the mode-decomposition scheme at the misaligned receiver. Extensive simulations obtained validate and evaluate that our developed joint BePre scheme can efficiently detect the signals of multiple OAM-modes for the misaligned transceiver and can significantly increase the spectrum efficiency.

Due to the potential capacity-boosting for wireless communications, the Radio vOrtex Wireless COMMunication (RowComm) over orthogonal states/modes of Orbital Angular Momentum (OAM) has been paid much attention in recent years. Uniform circular array (UCA), as an efficient and convenient antenna structure, can transmit/receive multiple OAM beams with different OAM-modes simultaneously when the transmitter and receiver are aligned. However, for high-order OAM-modes, the OAM beams are divergent accompanied by severe attenuations. Thus, it is difficult to directly use high-order OAM-modes to achieve high capacity for RowComms. To obtain high capacity potentially offered by OAM-modes, in this paper we transform the singular UCA into the concentric UCAs, where high capacity can be achieved using multiple parallel low-order OAM-modes instead of all high-order OAM-modes, to increase the capacity of transmitter-receiver aligned RowComms. In particular, we study two cases: 1). Concentric UCAs based RowComms without co-mode interference; 2). Concentric UCAs based RowComms with co-mode interference. We propose a co-mode-interference-free and a co-mode-interference-contained mode-decomposition schemes to recover transmit signals for these two cases, respectively. Also, we develop the optimal power allocation schemes to maximize the capacity for these two cases. Numerical simulations are presented to validate and evaluate that our developed concentric UCAs based low-order RowComms can significantly increase the capacity as compared with that of singular UCA based RowComms.

A standard two-qubit joint measurement is the well-known Bell state measurement (BSM), in which each reduced state (traced out one qubit) is the completely mixed state. Recently, a novel quantum joint measurement named elegant joint measurement (EJM) has been proposed, where the reduced states of the EJM basis have tetrahedral symmetry. In this work, we first suggest a five-parameter entangled state and reveal its inherent symmetry. Based on this, we define a more generalized EJM parameterized by $z$, $\varphi$ and $\theta$, and provide the quantum circuits for preparing and detecting these basis states. There are three main results: (i) the previous single-parameter EJM can be directly obtained by specifying the parameters $z$ and $\varphi$; (ii) the initial unit vectors related to the four vertices of the regular tetrahedron are not limited to the original choice and not all the unit vectors in cylindrical coordinates are suitable for forming the EJM basis; and (iii) the reduced states of the present EJM basis can always form two mirrorimage tetrahedrons, robustly preserving its elegant properties. We focus on figuring out what kind of states the EJM basis belongs to and providing a method for constructing the more generalized three-parameter EJM, which may contribute to the multi-setting measurement and the potential applications for quantum information processing., Comment: 9 pages, 3 figures

By enabling very high bandwidth for radio communications, the millimeter-wave (mmWave), which can easily be integrated with massive-multiple-input-multiple-output (massive-MIMO) due to small antenna size, has been attracting growing attention as a candidate for the fifth-generation (5G) and 5G-beyond wireless communications networks. On the other hand, the communication over the orthogonal states/modes of orbital angular momentum (OAM) is a subset of the solutions offered by massive-MIMO communications. Traditional massive-MIMO based mmWave communications did not concern the potential spectrum-efficiency-gain (SE-gain) offered by orthogonal states of OAM. However, the highly expecting maximum SE-gain for OAM and massive-MIMO communications is the product of SE-gains offered by OAM and multiplexing-MIMO. In this paper, we propose the OAM-embedded-MIMO (OEM) communication framework to obtain the multiplicative SE-gain for joint OAM and massive-MIMO based mmWave wireless communications. We design the parabolic antenna for each uniform circular array antenna to converge OAM signals. Then, we develop the mode-decomposition and multiplexing-detection scheme to obtain the transmit signal on each OAM-mode of each transmit antenna. Also, we develop the OEM-water-filling power allocation policy to achieve the maximum multiplicative SE-gain for OEM communications. The extensive simulations obtained validate and evaluate our developed parabolic antenna based converging method, mode-decomposition and multiplexing-detection scheme, and OEM-water-filling policy, showing that our proposed OEM mmWave communications can significantly increase the spectrum-efficiency as compared with traditional massive-MIMO based mmWave communications.

The frequency diverse array (FDA) is highly promising for improving covert communication performance by adjusting the frequency of each antenna at the transmitter. However, when faced with the cases of multiple wardens and highly correlated channels, FDA is limited by the frequency constraint and cannot provide satisfactory covert performance. In this paper, we propose a novel movable FDA (MFDA) antenna technology where positions of the antennas can be dynamically adjusted in a given finite region. Specifically, we aim to maximize the covert rate by jointly optimizing the antenna beamforming vector, antenna frequency vector and antenna position vector. To solve this non-convex optimization problem with coupled variables, we develop a two-stage alternating optimization (AO) algorithm based on the block successive upper-bound minimization (BSUM) method. Moreover, considering the challenge of obtaining perfect channel state information (CSI) at multiple wardens, we study the case of imperfect CSI. Simulation results demonstrate that MFDA can significantly enhance covert performance compared to the conventional FDA. In particular, when the frequency constraint is strict, MFDA can further increase the covert rate by adjusting the positions of antennas instead of the frequencies.

Frequency diverse array (FDA) is a promising antenna technology to achieve physical layer security by varying the frequency of each antenna at the transmitter. However, when the channels of the legitimate user and eavesdropper are highly correlated, FDA is limited by the frequency constraint and cannot provide satisfactory security performance. In this paper, we propose a novel movable FDA (MFDA) antenna technology where the positions of antennas can be dynamically adjusted in a given finite region. Specifically, we aim to maximize the secrecy capacity by jointly optimizing the antenna beamforming vector, antenna frequency vector and antenna position vector. To solve this non-convex optimization problem with coupled variables, we develop a two-stage alternating optimization (AO) algorithm based on block successive upper-bound minimization (BSUM) method. Moreover, to evaluate the security performance provided by MFDA, we introduce two benchmark schemes, i.e., phased array (PA) and FDA. Simulation results demonstrate that MFDA can significantly enhance security performance compared to PA and FDA. In particular, when the frequency constraint is strict, MFDA can further increase the secrecy capacity by adjusting the positions of antennas instead of the frequencies., Comment: arXiv admin note: substantial text overlap with arXiv:2407.20280

This article presents a digital twin (DT)-enhanced reinforcement learning (RL) framework aimed at optimizing performance and reliability in network resource management, since the traditional RL methods face several unified challenges when applied to physical networks, including limited exploration efficiency, slow convergence, poor long-term performance, and safety concerns during the exploration phase. To deal with the above challenges, a comprehensive DT-based framework is proposed to enhance the convergence speed and performance for unified RL-based resource management. The proposed framework provides safe action exploration, more accurate estimates of long-term returns, faster training convergence, higher convergence performance, and real-time adaptation to varying network conditions. Then, two case studies on ultra-reliable and low-latency communication (URLLC) services and multiple unmanned aerial vehicles (UAV) network are presented, demonstrating improvements of the proposed framework in performance, convergence speed, and training cost reduction both on traditional RL and neural network based Deep RL (DRL). Finally, the article identifies and explores some of the research challenges and open issues in this rapidly evolving field., Comment: 7pages, 6figures

Fluid Antenna Systems (FASs) have recently been proposed for enhancing the performance of wireless communication. Previous antenna designs to meet the requirements of FAS have been based on mechanically movable or liquid antennas and therefore have limited reconfiguration speeds. In this paper, we propose a design for a pixel-based reconfigurable antenna (PRA) that meets the requirements of FAS and the required switching speed. It can provide 12 FAS ports across 1/2 wavelength and consists of an E-slot patch antenna and an upper reconfigurable pixel layer with 6 RF switches. Simulation and experimental results from a prototype operating at 2.5 GHz demonstrate that the design can meet the requirements of FAS including port correlation with matched impedance., Comment: 13 pages, 16 figures, Submitted to IEEE Transations on Antennas and Propagation

This paper investigates the optimization of the long-standing probabilistically robust transmit beamforming problem with channel uncertainties in the multiuser multiple-input single-output (MISO) downlink transmission. This problem poses significant analytical and computational challenges. Currently, the state-of-the-art optimization method relies on convex restrictions as tractable approximations to ensure robustness against Gaussian channel uncertainties. However, this method not only exhibits high computational complexity and suffers from the rank relaxation issue but also yields conservative solutions. In this paper, we propose an unsupervised deep learning-based approach that incorporates the sampling of channel uncertainties in the training process to optimize the probabilistic system performance. We introduce a model-driven learning approach that defines a new beamforming structure with trainable parameters to account for channel uncertainties. Additionally, we employ a graph neural network to efficiently infer the key beamforming parameters. We successfully apply this approach to the minimum rate quantile maximization problem subject to outage and total power constraints. Furthermore, we propose a bisection search method to address the more challenging power minimization problem with probabilistic rate constraints by leveraging the aforementioned approach. Numerical results confirm that our approach achieves non-conservative robust performance, higher data rates, greater power efficiency, and faster execution compared to state-of-the-art optimization methods., Comment: This paper has been accepted for publication in the IEEE Journal on Selected Areas in Communications, Special Issue on Advanced Optimization Theory and Algorithms for Next Generation Wireless Communication Networks

A novel dual-band reconfigurable intelligent surface (DBI-RIS) design that combines the functionalities of millimeter-wave (mmWave) and sub-6 GHz bands within a single aperture is proposed. This design aims to bridge the gap between current single-band reconfigurable intelligent surfaces (RISs) and wireless systems utilizing sub-6 GHz and mmWave bands that require RIS with independently reconfigurable dual-band operation. The mmWave element is realized by a double-layer patch antenna loaded with 1-bit phase shifters, providing two reconfigurable states. An 8x8 mmWave element array is selectively interconnected using three RF switches to form a reconfigurable sub-6 GHz element at 3.5 GHz. A suspended electromagnetic band gap (EBG) structure is proposed to suppress surface waves and ensure sufficient geometric space for the phase shifter and control networks in the mmWave element. A low-cost planar spiral inductor (PSI) is carefully optimized to connect mmWave elements, enabling the sub-6 GHz function without affecting mmWave operation. Finally, prototypes of the DBI-RIS are fabricated, and experimental verification is conducted using two separate measurement testbeds. The fabricated sub-6 GHz RIS successfully achieves beam steering within the range of -35 to 35 degrees for DBI-RIS with 4x4 sub-6 GHz elements, while the mmWave RIS demonstrates beam steering between -30 to 30 degrees for DBI-RIS with 8x8 mmWave elements, and have good agreement with simulation results.

A quantum network shared entangled sources among distant nodes enables us to distribute entanglement along the network by suitable measurements. Network nonlocality means that it does not admit a network model involving local variables emitted from independent sources. In this work, we construct an $(n,m,p)$-type quantum network configuration and then derive the corresponding $n$-local correlation inequalities based on the assumption of independent sources. As a universal acyclic network configuration, it can cover most of the existing network models, such as the typical chain-network and star-network, and admit both centerless and asymmetric configurations. Then we demonstrate the non-$n$-locality of the present network by calculating the violation of the $n$-local inequality with bipartite entangled sources and Pauli measurements., Comment: 7 pages, 2 figures

Integrated sensing and communication (ISAC) has become a promising technology for future communication system. In this paper, we consider a millimeter wave system over high mobility scenario, and propose a novel simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) aided ISAC scheme. To improve the communication service of the in-vehicle user equipment (UE) and simultaneously track and sense the vehicle with the help of nearby roadside units (RSUs), a STAR-RIS is equipped on the outside surface of the vehicle. Firstly, an efficient transmission structure is developed, where a number of training sequences with orthogonal precoders and combiners are respectively utilized at BS and RSUs for channel parameter extraction. Then, the near-field static channel model between the STAR-RIS and in-vehicle UE as well as the far-field time-frequency selective BS-RIS-RSUs channel model are characterized. By utilizing the multidimensional orthogonal matching pursuit (MOMP) algorithm, the cascaded channel parameters of the BS-RIS-RSUs links can be obtained at the RSUs. Thus, the vehicle localization and its velocity measurement can be acquired by jointly utilizing these extracted cascaded channel parameters of all RSUs. Note that the MOMP algorithm can be further utilized to extract the channel parameters of the BS-RIS-UE link for communication. With the help of sensing results, the phase shifts of the STAR-RIS are delicately designed, which can significantly improve the received signal strength for both the RSUs and the in-vehicle UE, and can finally enhance the sensing and communication performance. Moreover, the trade-off for sensing and communication is designed by optimizing the energy splitting factors of the STAR-RIS. Finally, simulation results are provided to validate the feasibility and effectiveness of our proposed STAR-RIS aided ISAC scheme., Comment: 14 pages, 11 figures

Radio Tomographic Imaging (RTI) is a phaseless imaging approach that can provide shape reconstruction and localization of objects using received signal strength (RSS) measurements. RSS measurements can be straightforwardly obtained from wireless networks such as Wi-Fi and therefore RTI has been extensively researched and accepted as a good indoor RF imaging technique. However, RTI is formulated on empirical models using an assumption of light-of-sight (LOS) propagation that does not account for intricate scattering effects. There are two main objectives of this work. The first objective is to reconcile and compare the empirical RTI model with formal inverse scattering approaches to better understand why RTI is an effective RF imaging technique. The second objective is to obtain straightforward enhancements to RTI, based on inverse scattering, to enhance its performance. The resulting enhancements can provide reconstructions of the shape and also material properties of the objects that can aid image classification. We also provide numerical and experimental results to compare RTI with the enhanced RTI for indoor imaging applications using low-cost 2.4 GHz Wi-Fi transceivers. These results show that the enhanced RTI can outperform RTI while having similar computational complexity to RTI.

Covert transmission is investigated for a cooperative deception strategy, where a cooperative jammer (Jammer) tries to attract a multi-antenna adversary (Willie) and degrade the adversary's reception ability for the signal from a transmitter (Alice). For this strategy, we formulate an optimization problem to maximize the covert rate when three different types of channel state information (CSI) are available. The total power is optimally allocated between Alice and Jammer subject to Kullback-Leibler (KL) divergence constraint. Different from the existing literature, in our proposed strategy, we also determine the optimal transmission power at the jammer when Alice is silent, while existing works always assume that the jammer's power is fixed. Specifically, we apply the S-procedure to convert infinite constraints into linear-matrix-inequalities (LMI) constraints. When statistical CSI at Willie is available, we convert double integration to single integration using asymptotic approximation and substitution method. In addition, the transmission strategy without jammer deception is studied as a benchmark. Finally, our simulation results show that for the proposed strategy, the covert rate is increased with the number of antennas at Willie. Moreover, compared to the benchmark, our proposed strategy is more robust in face of imperfect CSI., Comment: 33 pages, 8 Figures

Binary neural network (BNN) is an extreme quantization version of convolutional neural networks (CNNs) with all features and weights mapped to just 1-bit. Although BNN saves a lot of memory and computation demand to make CNN applicable on edge or mobile devices, BNN suffers the drop of network performance due to the reduced representation capability after binarization. In this paper, we propose a new replaceable and easy-to-use convolution module RepConv, which enhances feature maps through replicating input or output along channel dimension by $\beta$ times without extra cost on the number of parameters and convolutional computation. We also define a set of RepTran rules to use RepConv throughout BNN modules like binary convolution, fully connected layer and batch normalization. Experiments demonstrate that after the RepTran transformation, a set of highly cited BNNs have achieved universally better performance than the original BNN versions. For example, the Top-1 accuracy of Rep-ReCU-ResNet-20, i.e., a RepBconv enhanced ReCU-ResNet-20, reaches 88.97% on CIFAR-10, which is 1.47% higher than that of the original network. And Rep-AdamBNN-ReActNet-A achieves 71.342% Top-1 accuracy on ImageNet, a fresh state-of-the-art result of BNNs. Code and models are available at:https://github.com/imfinethanks/Rep_AdamBNN., Comment: This paper has absolutely nothing to do with repvgg, rep means repeating

The channel estimation overhead of reconfigurable intelligent surface (RIS) assisted communication systems can be prohibitive. Prior works have demonstrated via simulations that grouping neighbouring RIS elements can help to reduce the pilot overhead and improve achievable rate. In this paper, we present an analytical study of RIS element grouping. We derive a tight closed-form upper bound for the achievable rate and then maximize it with respect to the group size. Our analysis reveals that more coarse-grained grouping is important-when the channel coherence time is low (high mobility scenarios) or the transmit power is large. We also demonstrate that optimal grouping can yield significant performance improvements over simple `On-Off' RIS element switching schemes that have been recently considered., Comment: Submitted to IEEE Wireless Communications Letters

We present a deep learning model for data-driven simulations of random dynamical systems without a distributional assumption. The deep learning model consists of a recurrent neural network, which aims to learn the time marching structure, and a generative adversarial network (GAN) to learn and sample from the probability distribution of the random dynamical system. Although GANs provide a powerful tool to model a complex probability distribution, the training often fails without a proper regularization. Here, we propose a regularization strategy for a GAN based on consistency conditions for the sequential inference problems. First, the maximum mean discrepancy (MMD) is used to enforce the consistency between conditional and marginal distributions of a stochastic process. Then, the marginal distributions of the multiple-step predictions are regularized by using MMD or from multiple discriminators. The behavior of the proposed model is studied by using three stochastic processes with complex noise structures.