Search

This paper studies the water nanojet ejection process using molecular dynamics simulation. The results show that nanoscale water droplets cannot separate from the nozzle plate surface when the nozzle aperture has a diameter of 27.5 Å or smaller. The maximum height of the produced water nanojet is reduced after reaching to its highest position when the jet does not separate from the plate surface. Separation phenomenon between the water nanojet and the nozzle plate surface is the most obvious with the 27.5-Å-diameter nozzle aperture for this simulation setup. In addition, initial findings on the characteristics of nanoscale water droplets (width and contact angle) impinging onto a fixed plate surface are revealed in preparation for future investigation.

The adhesion strength of the coated SiO2thin film to SUS304 stainless steel substrates with various surface treatment conditions is studied in this research. The surface of the SUS304 stainless steel substrate is first treated with 1000-W plasma and then a SiO2thin film is deposited onto the surface via radio-frequency magnetron sputtering. Scanning electron microscopy is employed to observe the surface and cross section of the coating and X-ray diffraction is used to analyze the crystallographic structure. Moreover, a nanoscratch test instrument was employed to examine the indentation, scratches, coating hardness, modulus of elasticity, coefficient of friction, and critical adhesion of the SiO2film and to obtain surface profiles. A comparison of the coating adhesion of the substrate surfaces with and without plasma treatment indicates that critical adhesion increases significantly after Ar/N2/O2plasma treatment. [ABSTRACT FROM AUTHOR]