Search

To suppress parameter mismatch and improve the output performance of model predictive control (MPC), a new robust virtual‐vector MPC strategy is proposed for a five‐phase permanent‐magnet motor in this study. Firstly, the incremental predictive model is applied to remove the impact of flux mismatch. Then the d‐q axis inductance parameter sensitivity of MPC is analysed, which produces the predictive current error between the normal parameter and mismatched parameter. Based on the current error, a new cost function is designed to select the voltage vector more accurately when the d‐q axis inductance parameter mismatch occurs. Thus, good robustness to the parameter's variation can be guaranteed. Afterwards, the duty cycle modulation technology is applied to allocate the duration time of two adjacent vector‐vectors and zero vector. So the motor current harmonics and torque ripple can be considerably suppressed. Finally, the experimental results are provided to show the effectiveness of this proposed method. [ABSTRACT FROM AUTHOR]

This paper investigates the unbalanced magnetic force (UMF) produced by angular eccentricity in a magnetic screw. The principle of eccentricity is briefly outlined and an analytical expression that can be used to predict UMF of a magnetic screw is established. A 3D magnetic screw model with helically magnetized permanent magnets (PM) has been built and simulated in ANSYS Maxwell with different angular eccentricities. Comparing the finite elements (FE) simulation and analytical calculation results, there is a certain difference in the UMF of the magnetic screw, which is also caused by the asymmetry of the magnetic screw structure. It has been shown that compared to the linear tubular PM motor with the same thrust force capability, the magnetic screw has a much small UMF, which greatly simplifies the mechanical design of the magnetic screw. [ABSTRACT FROM AUTHOR]

This article proposes an equivalent magnetic network (EMN) model to improve the accuracy of electromagnetic analysis, where a modular modelling of hybrid cross‐shaped mesh (CS‐M) elements is introduced. By applying hybrid CS‐M elements, the modelling of air gap and its surrounding regions is regulated into an identical width. As a result, the relative motion of the motor is simpler to simulate by changing the nodal connection without involving the non‐linear permeance. The airgap flux density is solved more accurately than the regular CS‐M elements as well. A 12‐slot/10‐pole ferrite permanent magnet (FPM) motor with assisted poles of unequal pole‐arc ratios is selected as an example to be built with the proposed EMN model. After solving the EMN model, the effectiveness and accuracy of the proposed EMN model are verified by comparing it with the FEA model and experiments. Additionally, based on the frozen permeability (FP) method, transient torque components can be separated accurately with a transient torque solution related to virtual work principle (VWP) for the EMN model. [ABSTRACT FROM AUTHOR]

This paper proposes a novel tubular double-stator vernier permanent-magnet (TDS-VPM) motor for artificial hearts. The key of the proposed motor is double-stator and vernier structures. Due to its vernier structure, more PMs can be adopted in the proposed TDS-VPM motor and the useful harmonics of the air-gap flux density are increased, thus improving thrust density. Furthermore, double stator, namely inner stator and outer stator, has an appropriate 90° (electrical degree) angle difference. Since the inner stator is located inside the mover, the motor space is fully used. Hence, the thrust density is enhanced and the axial direction length is reduced. Meanwhile, the angle difference between the inner and the outer stator can reduce the cogging force of this TDS-VPM motor. The electromagnetic characteristics of the proposed motor are analyzed using the time-stepping finite-element method, confirming the validity of the theoretical analysis. [ABSTRACT FROM PUBLISHER]