Search

Twenty-seven advanced lines including three exiting varieties (BARI Gom 21, BARI Gom 32 and BARI Gom 33) were evaluated in alpha lattice design with two replications at Bangladesh Wheat and Maize Research Institute, Dinajpur and regional stations at Joydebpur, Jashore and Rajshahi under irrigated timely sown (ITS) and irrigated late sawn (ILS) conditions. The objective of the study was to find out the heat-tolerant wheat lines for future breeding programme to develop heat-tolerant wheat varieties. The genotypes were evaluated for phenological variation such as heading and maturity, yield and yield components, disease reaction, sterility, visual grain quality, etc. The results showed that the highest grain yield (5951 kg ha-1) was recorded with genotype BAW 1415 at Dinajpur under ITS condition and the lowest grain yield (1923 kg ha-1) was observed in BAW 1416 at Rajshahi under ILS condition. Considering the overall performances, genotypes BAW 1402, BAW 1403, BAW 1406, BAW 1407, BAW 1408, BAW 1411, BAW 1422 and BAW 1425 performed better. Considering disease infestation, genotypes BAW 1374, BAW 1393, BAW 1394, BAW 1397, BAW 1399 and BAW 1401 showed a good level of resistance to both leaf rust (LR) and wheat blast (WB). These genotypes could be selected for future breeding programmes to develop heat-tolerant and diseases resistance varieties. Bangladesh J. Agri. 2022, 47(2): 1-16

Peat wildfires can burn over large areas of peatland, releasing ancient carbon and toxic gases into the atmosphere over prolonged periods. These emissions cause haze episodes of pollution and accelerate climate change. Peat wildfires are characterised by smouldering – the flameless, most persistent type of combustion. Mitigation strategies are needed in arctic, boreal, and tropical areas but are hindered by incomplete scientific understanding of smouldering. Here, we present GAMBUT, the largest and longest to-date field experiment of peat wildfires, conducted in a degraded peatland of Sumatra. Temperature, emission and spread of peat fire were continuously measured over 4–10 days and nights, and three major rainfalls. Measurements of temperature in the soil provide field experimental evidence of lethal fire severity to the biological system of the peat up to 30 cm depth. We report that the temperature of the deep smouldering is ~13% hotter than shallow layer during daytime. During night-time, both deep and shallow smouldering had the same level of temperature. The experiment was terminated by suppression with water. Comparison of rainfall with suppression confirms the existence of a critical water column height below which extinction is not possible. GAMBUT provides a unique understanding of peat wildfires at field conditions that can contribute to mitigation strategies.

Evaluation in standardization really needs to be carried out, including whether the livestock is in accordance with the SNI vital statistics standard (Indonesian national standard). The purpose of the study was to estimate heritability and breeding values of body weight and vital statistics in Etawah Grade (PE) goats in BPTU and HPT Pelaihari Kalimantan Selatan. The material used were the performance records of 220 PE goats, offsprings of 35 males and 71 females. The variables measured were body length and chest girth at birth, weaning, and 1 year of age. Variance componenet were analyzed using variance analysisrade. Heritability was estimated using the paternal half-sib correlation method by applying SPSS software. Breeding value was estimated using the progeny test model. The highest breeding value on body length at birth, at weaning age and at 1 year of age were sire 3315 KK, sire 4093 OK, and sire 4007 OK, respectively. The highest breeding Value on chest girth at birth, weaning age and 1 year of age were sire 3983 HH, 3315 HH, and 3971 HH. The conclusion of this study were the heritability for body weight were categorized high and for statistic vital were varied from medium to high value.

Peatland wildfires present challenge to the mitigation of climate change due to the large amount of ancient carbon emission. Once ignited, the organic soils in peatland can burn for a long periods (weeks to months) and are difficult to extinguish. Peat fire is governed by smouldering combustion which is the slow, low temperature, flameless burning of charring porous fuel, and the most persistent type of combustion phenomena. The detection and monitoring of peatland wildfires are often conducted by remote sensing like satellite. However, there is currently a missing gap between spread of peat fires in the small laboratory scale and the large field scale. This work covers this gap by conducting field-scale controlled experiment of peatland wildfires. The experimental campaign, GAMBUT, was conducted in the peatland of Sumatra, Indonesia, covering an area of 374 m2. Smouldering spread rate was measured by infrared cameras and subsurface thermocouples. The smouldering sustained up to 10 days and nights, and survived against three rainfalls. Observation from infrared images show that horizontal smouldering spread rate fluctuates during propagation. However, no significant difference was found between average horizontal spread rates from the measurements of infrared camera and thermocouples, i.e. 0.3±0.13 cm/h to 0.8±0.2 cm/h. The spread rates here agree with the trend in the literature of laboratory experiments, fit within in the ranges of high moisture (MC) and inorganic (IC) contents of the soil (MC between 23 to 141% and IC between 49 to 72%). Even though slower, the fires thrived up to 10 days and against three rainfalls, demonstrating the persistency of smouldering peat fires and calling for a consideration of degraded peatland with high inorganic content to be consistently included in the mapping and monitoring of peatland area. GAMBUT presents a unique understanding of peatland wildfires at field conditions and aims to contribute to the better monitoring and mitigation acts.

The experiment was carried out with 50 wheat lines to study their mean, range, cv (%), correlation co- efficient, and path co- efficient considering 14 different morphological characters at the experimental field of Regional Wheat Research Centre (RWRC), Bangladesh Agricultural Research Institute (BARI), Gazipur during December 2010 to April 2011. Significant variation was observed among the genotypes for all characters studied. In general, genotypic correlations were higher than the phenotypic correlations. It indicates that there was an inherent association among them which was adversely influenced by the environment. The correlation coefficients showed that, seed yield was negatively and significantly correlated with days to heading (DTH), plant height (PHT), days to anthesis (DTA), days to physiological maturity (DPM), and canopy temperature at anthesis stage (CTanth.) but only negatively correlated with canopy temperature at vegetative stage (CTveg.), canopy temperature at grain filling stage (CTgf.), spikelets per spike both genotypically and phenotypically and grain per spike showed genotypically negative correlation. Path analysis showed that plant height (PHT), days to physiological maturity (DPM), canopy temperature at grain filling stage (CTgf.), and thousand grain weight (TGW) influenced seed yield directly in positive direction but days to heading (DTH), days to anthesis (DTA), grain filling duration (GFD), grain filling rate (GFR), Chlorophyll content at anthesis stage (CHLA), canopy temperature at vegetative stage (CTveg.), canopy temperature at anthesis stage (CTanth.), spikelets per spike, and grains per spike had negative direct effect on seed yield. Considering analytical findings of correlation co-efficient, path co-efficient analysis and field performance, the genotypes G 3, G 10, G 11, G 12, G13, G 21, G 29, G 35, G 38, G 40, G 46 and G 48 were found suitable for future breeding programme.Bangladesh J. Agril. Res. 42(3): 571-588, September 2017

In this paper, we present the design, fabrication, and characterization of a long-arm comb-drive actuator with an externally mounted large mirror for optical applications. The provision for an externally mounted mirror can be useful for many optical applications, which require large and high-quality reflecting surfaces. The angular stretch of the comb fingers at the far end is kept smaller than those near the anchor point. This structural feature allows the design of actuator arm lengths of over 5 mm. The truss of the actuator is designed carefully to support the large movable arm. An analytical model for the electrostatic forces in the actuator was developed, and detailed analyses for side instability and resonance frequency were performed. The complete fabrication process involving bulk micromachining of silicon-on-insulator (SOI) wafer using a two-mask process is described. A procedure for efficient mounting of the mirror utilizing die bonder, vacuum tip, and silver epoxy is demonstrated. Static characterization measurements show that the actuator can achieve a rotational angle of 3° with an applied voltage of 130 V. A resonance frequency of $\sim 246$ Hz for a mirror size of $2~\textrm {mm} \times 100~\mu \textrm {m} \times 1$ mm was determined by optical characterization; this closely matches with the simulation results and the analytical model. [2014-0318]

No abstract available