Search

In contrast to magnetic order formed by electrons’ dipolar moments, ordering phenomena associated with higher-order multipoles (quadrupoles, octupoles, etc.) are more difficult to characterize because of the limited choice of experimental probes that can distinguish different multipolar moments. The heavy-fermion compound CeB_{6} and its La-diluted alloys are among the best-studied realizations of the long-range-ordered multipolar phases, often referred to as “hidden order.” Previously, the hidden order in phase II was identified as primary antiferroquadrupolar and field-induced octupolar order. Here, we present a combined experimental and theoretical investigation of collective excitations in phase II of CeB_{6}. Inelastic neutron scattering (INS) in fields up to 16.5 T reveals a new high-energy mode above 14 T in addition to the low-energy magnetic excitations. The experimental dependence of their energy on the magnitude and angle of the applied magnetic field is compared to the results of a multipolar interaction model. The magnetic excitation spectrum in a rotating field is calculated within a localized approach using the pseudospin representation for the Γ_{8} states. We show that the rotating-field technique at fixed momentum can complement conventional INS measurements of the dispersion at a constant field and holds great promise for identifying the symmetry of multipolar order parameters and the details of intermultipolar interactions that stabilize hidden-order phases.

The K+ channel activated by the Ca2+, KCNN4, has been shown to contribute to red blood cell dehydration in the rare hereditary hemolytic anemia, the dehydrated hereditary stomatocytosis. We report two de novo mutations on KCNN4, We reported two de novo mutations on KCNN4, V222L and H340N, characterized at the molecular, cellular and clinical levels. Whereas both mutations were shown to increase the calcium sensitivity of the K+ channel, leading to channel opening for lower calcium concentrations compared to WT KCNN4 channel, there was no obvious red blood cell dehydration in patients carrying one or the other mutation. The clinical phenotype was greatly different between carriers of the mutated gene ranging from severe anemia for one patient to a single episode of anemia for the other patient or no documented sign of anemia for the parents who also carried the mutation. These data compared to already published KCNN4 mutations question the role of KCNN4 gain-of-function mutations in hydration status and viability of red blood cells in bloodstream.

Objective: Obstructive sleep-disordered breathing (SDB) events, unlike central events, are associated with increased respiratory effort. Esophageal pressure (Pes) monitoring is the gold standard for measuring respiratory effort, but it is typically poorly tolerated because of its invasive nature. The objective was to investigate whether machine learning can be applied to routinely collected non-invasive, polysomnography (PSG) measures to accurately model peak negative Pes. Approach: One thousand one hundred and nineteen patients from the Stanford Sleep Clinic with PSGs containing Pes served as the sample. The selected non-invasive PSG signals included nasal pressure, oral airflow, thoracoabdominal effort, and snoring. A long short-term memory neural network was implemented to achieve a context-based mapping between the non-invasive features and the Pes values. A hold-out dataset served as a prospective validation of the algorithm without needing to undertake a costly new study with the impractically invasive Pes. Main results: The median difference between the measured and predicted Pes was 0.61 cmH2O with an interquartile range (IQR) of 2.99 cmH2O and 5th and 95th percentiles of  −5.85 cmH2O and 5.47 cmH2O, respectively. The model performed well when compared to actual esophageal pressure signal (ρmedian  =  0.581, p   =  0.01; IQR  =  0.298; ρ5%  =  0.106; ρ95%  =  0.843). Significance: A significant difference in predicted Pes was shown between normal breathing and all obstructive SDB events; whereas, central apneas did not significantly differ from normal breathing. The developed system may be used as a tool for quantifying respiratory effort from the existing clinical practice of PSG without the need for Pes, improving characterization of SDB events as obstructive or not. [ABSTRACT FROM AUTHOR]

The unconventional behaviour of samarium hexaboride has been difficult to explain in part because of differences between samples. Here the authors use gadolinium to exemplify that hard to avoid impurities introduce a low energy density of states that may explain earlier observations.

The online combination of reversed-phase liquid chromatography and supercritical fluid chromatography (online RPLC × SFC) is an attractive technique for the characterization of complex samples containing neutral compounds as the two techniques are highly complementary, especially with a polar stationary phase in supercritical fluid chromatography (SFC). However, the setup is challenging due to the presence of hydro-organic solvents in RPLC, which become injection solvent in SFC. In this study, numerous key experimental parameters were identified and found to have a major effect on peak shape under RPLC × SFC conditions. These parameters included the organic modifier in reversed-phase liquid chromatography (RPLC), the co-solvent in SFC, the gradient conditions and the column ID in SFC, the configuration of the valve and finally, the injection volume in SFC that should be maximized. Acetonitrile (ACN) in RPLC, a mixture of ACN and methanol (MeOH) (50/50, v/v) in SFC, a minimum initial composition of 5% B in SFC, column IDs of 1.0 mm and 2.1 mm in RPLC and SFC respectively and flushing the interface loops with pure CO 2 while adding the co-solvent after the valve, are all conditions that have been identified as perfectly suitable for online RPLC × SFC. They were successfully applied to the online RPLC × SFC separations of microalgae bio-oil samples. Despite unusual injection conditions, the peaks were symmetrical over the entire chromatogram, leading to a high separation power., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Microalgae are an attractive feedstock for biofuel production thanks to their renewable nature, high growth rate, and ability to use anthropogenic CO 2 . The conversion of microalgae by hydrothermal liquefaction (HTL) leads to a solid residue, a gaseous phase, and a biocrude. However, the bio-oil is rich in heteroatoms and requires upgrading processes to be used as biofuels. For these treatments to be effective, detailed knowledge of the sample is crucial. The bio-oil was characterized by direct introduction into a Fourier transform ion cyclotron resonance mass spectrometer (DI-FTICR MS) with an electrospray ionization source (ESI). Thousands of molecular formulas were assigned with a high level of confidence, mainly compounds with nitrogen and oxygen atoms. Additionally, the bio-oil was analyzed by coupling supercritical fluid chromatography (SFC) and FTICR to combine the separation power of SFC to the high performances of a 12 T FTICR. Quadrupole detection (2ω) was used in FTICR to have a high resolving power with a lower transient time. The coupling allowed the separation of many isomers along the chromatogram, showing the isomeric complexity of microalgae bio-oils. Moreover, classes of compounds were separated according to their heteroatom class thanks to the SFC separation. In this work, the advantages of DI-FTICR MS and SFC-FTICR MS proved complementary, and DI was useful to study the bio-oil at the molecular scale thanks to the high performances, while SFC proved useful for the characterization at the isomeric scale. This demonstrated the significant potential of this new online hyphenated technique for the characterization of complex matrices.

This study used alfa grass fibres as a natural low-cost adsorbent to remove lead, copper, and zinc ions from aqueous solutions. The adsorbent was characterized by FTIR, SEM, BET surface area, ATG, and XRD techniques. The effects of pH, contact time, initial metal concentration, and adsorbent dosage on the adsorption efficiency were evaluated in batch experiments. The results showed that the adsorption of all metals was fast, and optimal removal efficiency was achieved within 25 min of contact time using 5000 mg/L of Alfa fibres at pH 6.3. The adsorption selectivity order was Pb 2+  > Cu 2+  > Zn 2+ with Pb 2+ removal efficiencies up to 97.6%. The adsorption kinetics were best explained by a pseudo-second-order kinetic model. The experimental adsorption data fitted very well with the Langmuir isotherm model, and less well with the Freundlich and Temkin isotherm models. The maximum adsorption capacities were respectively 14.492, 11.904, and 8.695 mg/g for Pb 2+ , Cu 2+ , and Zn 2+ . The results of this study indicated that Alfa fibres could be used as effective adsorbent for the removal of Pb 2+ , Cu 2+ , and Zn 2+ from aqueous solutions.

At a time when nature conservation has become essential to ensure the long-term sustainability of our environment, it is widely acknowledged that conservation actions must be implemented within a solid taxonomic framework. In preparation for the upcoming update of the IUCN Red List, we here update the European checklist of the wild bees (sensu the IUCN geographical framework). The original checklist, published in 2014, was revised for the first time in 2017. In the present revision, we add one genus, four subgenera and 67 species recently described, 40 species newly recorded since the latest revision (including two species that are not native to Europe), 26 species overlooked in the previous European checklists and 63 published synonymies. We provide original records for eight species previously unknown to the continent and, as original taxonomic acts, we provide three new synonyms, we consider two names as nomina nuda, ten names as nomina dubia, three as species inquirenda, synonymize three species and exclude 40 species from the previous checklist. Around a hundred other taxonomic changes and clarifications are also included and discussed. The present work revises the total number of genera for IUCN Europe to 77 and the total number of species to 2,138. In addition to specifying the taxonomic changes necessary to update the forthcoming Red List of European bees, we discuss the sampling and taxonomic biases that characterise research on the European bee fauna and highlight the growing importance of range expansions and species invasions.

The evolution of low-cost ecotechnologies in water treatment and purification is highly increased. Face to the growing global demand for eco-friendly water treatment materials, the non-valorized herb-based biomass covering a large area could be a promising alternative. Herbs (HB) are currently one of the cheapest biomasses. Therefore, the utilization of HB for environmental applications is relevant. HB was treated and activated in this work to produce an eco-friendly adsorbent for nitrate removal from groundwater. HB was treated with modified carbonization at 220 °C to produce highly reactive biochar (BCH). Ammonium groups (AM) are immobilized covalently over the BCH surface, and then, the resulting materials BCH-AM are fully characterized. Results showed that ammonium is successfully grafted at the BCH surface, producing a highly stable material. Measurements on nitrate ion adsorption revealed that BCH-AM are of great interest as 80% of nitrate ions (NO 3 - ) were removed. Importantly, the eco-friendly BCH-AM demonstrated the ability to easily desorb the nitrate ions using Na 2 CO 3 as a green eluent. Parametric studies confirmed the effectiveness of the prepared adsorbent and approved that the adsorption occurred by electrostatic interactions. To demonstrate the performance of the adsorbent, BCH-AM was evaluated to remove NO 3 - from groundwater upstream in a water treatment plant. This work opens an immense perspective for herb biomass to be the actual challenge to resolve environmental problems., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Bio-oils obtained by thermochemical or biochemical conversion of biomass represent a promising source of energy to complement fossil fuels, in particular for maritime or air transport for which the use of hydrogen or electricity appears complicated. As these bio-oils are very rich in water and heteroatoms, additional treatments are necessary before they can be used as biofuel. In order to improve the efficiency of these treatments, it is important to have a thorough knowledge of the composition of the bio-oil. The characterization of bio-oils is difficult because they are very complex mixtures with thousands of compounds covering a very wide range of molecular weight and polarity. Due to the high degree of orthogonality between the two chromatographic dimensions, the on-line combination of reversed-phase liquid chromatography and supercritical fluid chromatography (on-line RPLC x SFC) can significantly improve the characterization of such complex matrices. The hyphenation was optimized by selecting, in SFC, the stationary phase, the co-solvent, the make-up solvent prior to high resolution mass spectrometry (HRMS) and the injection solvent. Additionally, a new interface configuration is described. Quality descriptors such as the occupation of the separation space, the peak shapes and the signal intensity were considered to determine the optimal conditions. The best results were obtained with bare silica, a co-solvent composed of acetonitrile and methanol (50/50, v/v), a make-up solvent composed of methanol (90%) and water (10%) with formic acid (0.1%), an addition of co-solvent through an additional pump for SFC separation in a 2.1 mm column, and an hydro-organic solvent as injection solvent. The optimized setup was used to analyze two microalgae bio-oils: the full bio-oil coming from hydrothermal liquefaction and Soxhlet extraction of microalgae, and the gasoline cut obtained after distillation of the full bio-oil. Results in on-line RPLC x SFC-qTOF were particularly interesting, with very good peak shapes and high reproducibility. Moreover, the high degree of orthogonality for microalgae bio-oils of RPLC and SFC was highlighted by the very large occupation of the separation space. Isomeric profiles of compound families could be obtained in RPLC x SFC-qTOF and many isomers not separated in SFC alone were separated in RPLC and vice versa, thus showing the complementarity of the two chromatographic techniques., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Biosorption is an efficient and cost-effective method for heavy metals' remediation. However, saturated biosorbents may pose a serious problem for the environment. Flax fibres have shown very good adsorption capacities to remove zinc, copper and lead ions from contaminated aqueous solutions. In this study, adsorption-desorption cycles were conducted with loaded flax fibres in batch mode to recover heavy metals using four types of solutions: hydrochloric acid solution, nitric acid solution, sodium hydroxide solution and ultrapure water. Desorption kinetic studies, conducted with loaded flax fibres, showed very fast desorption of zinc, copper and lead when using nitric and hydrochloric acids with a selectivity sequence of Zn (totally desorbed) > Cu (94%) > Pb (80-73%). Desorption kinetic was slower with the use of sodium hydroxide and showed much lower desorption rates of Zn (62%) > Pb (12%) > Cu (7%). Desorption of zinc and copper from previously loaded fibres from binary metal ion system in lead solution was also investigated. Different concentrations ranging from 0.04 to 0.20 mmol/L were tested. The obtained results demonstrated a significant release in the order Zn (18-90%) > Cu (2-42%), while lead was still efficiently adsorbed. Retention efficiencies of zinc and copper and adsorption efficiency of lead resulted in the same adsorption efficiencies of the three metal ions onto flax fibres in the ternary metal ion system.

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

To identify the risk factors of early occurrence of malnutrition in infants with severe congenital heart disease (CHD) during their first year of life. Retrospective longitudinal multicenter study carried out from January 2014 to December 2020 in two tertiary care CHD centers. Four CHD hemodynamic groups were identified. Malnutrition was defined by a Waterlow score under 80% and/or underweight under -2 standard deviations. A total of 216 infants with a severe CHD, e.g., requiring cardiac surgery, cardiac catheterization, or hospitalization for heart failure during their first year of life, were included in the study. Malnutrition was observed among 43% of the cohort, with the highest prevalence in infants with increased pulmonary blood flow (71%) compared to the other hemodynamic groups (p < 0.001). In multivariate analysis, low birthweight (OR 0.62, 95% CI 0.44-0.89, p = 0.009), CHD with increased pulmonary blood flow (OR 4.80, 95% CI 1.42-16.20, p = 0.08), heart failure (OR 9.26, 95% CI 4.04-21.25, p < 0.001), and the number of hospitalizations (OR 1.35, 95% CI 1.08 l-1.69, p = 0.009) during the first year of life were associated with malnutrition (AUC 0.85, 95% CI 0.79-0.90).  Conclusions: In infants with a severe CHD, early occurrence of malnutrition during the first year of life affected a high proportion of subjects. CHD with increased pulmonary blood flow, low birthweight, heart failure, and repeated hospitalizations were risk factors for malnutrition. Further studies are required to identify optimal nutritional support in this population. What is Known: • Malnutrition is a known morbidity and mortality factor in children with severe congenital heart disease. What is New: • Early occurrence of malnutrition during the first year of life in infant severe congenital heart disease (CHD) was high (43%). • CHD with increased pulmonary blood flow, low birthweight, heart failure, and repeated hospitalizations during the first year of life were risk factors for malnutrition., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study investigates the pilot-scale ozone treatment of reverse osmosis concentrate (ROC), originating from variable tank truck cleaning wastewater. The influence of ozonation on short- and long-term biodegradation potential was examined through respirometry and Zahn-Wellens, respectively. Ecotoxicity was also examined for several concentrate batches and ozonation steps. Chemical oxidation through ozone had a beneficial effect on chemical oxygen demand removal, with a removal efficiency up to 56%. Formation of short-term biochemical oxygen demand (BOD st ) was induced for several, but not all batches, showing the potential of subsequent biological treatment of ozonated ROC. An increase in the inherent biodegradability through Zahn-Wellens was observed for all tested samples after ozonation, rising to a maximum of 68% after 3 hours of ozonation, highlighting the importance of sludge adaptation. Ecotoxicity, tested with Artemia franciscana and the saltwater algae P. tricornutum, showed initial decreases in algae inhibition after short ozonation periods. An increase in algae inhibition was, however, seen after prolonged ozonation for all tested ROC samples, pointing to the formation of ecotoxic by-products. Artemia showed no significant toxicity effects. When applying biological treatment through Zahn-Wellens, a decrease in ecotoxicity was observed for several samples, likely through biological oxidation of the produced degradation products.

Gasoline emissions contain high levels of pollutants, including particulate matter (PM), which are associated with several health outcomes. Moreover, due to the depletion of fossil fuels, biofuels represent an attractive alternative, particularly second-generation biofuels (B2G) derived from lignocellulosic biomass. Unfortunately, compared to the abundant literature on diesel and gasoline emissions, relatively few studies are devoted to alternative fuels and their health effects. This study aimed to compare the adverse effects of gasoline and B2G emissions on human bronchial epithelial cells. We characterized the emissions generated by propane combustion (CAST1), gasoline Surrogate, and B2G consisting of Surrogate blended with anisole (10%) (S+10A) or ethanol (10%) (S+10E). To study the cellular effects, BEAS-2B cells were cultured at air-liquid interface for seven days and exposed to different emissions. Cell viability, oxidative stress, inflammation, and xenobiotic metabolism were measured. mRNA expression analysis was significantly modified by the Surrogate S+10A and S+10E emissions, especially CYP1A1 and CYP1B1 . Inflammation markers, IL-6 and IL-8 , were mainly downregulated doubtless due to the PAHs content on PM. Overall, these results demonstrated that ultrafine particles generated from biofuels Surrogates had a toxic effect at least similar to that observed with a gasoline substitute (Surrogate), involving probably different toxicity pathways.

In this study, HS-SPME/GC-MS and ICP-AES/MS methods are presented to extract and quantify pesticides and metals in palm wines. Various parameters affecting the extraction were investigated: SPME fiber, equilibrium and extraction time, extraction temperature, salinity, and stirring, through an experimental design with 45 trials. The developed method allowed to identify 35 pesticides and quantify 29 of them, from different families of pesticides in 32 palm wine samples. Method performance was evaluated in terms of linearity, repeatability, LOD, LOQ, and accuracy. Among the 32 samples analyzed in 3 replicates, 7 pesticides were detected in 10 samples. Dichlorvos was the only pesticide detected at levels above the European maximal limits. Additionally, 10 of the 19 metals explored by ICP-AES and ICP-MS were found in all samples. Six metals were detected in different samples at levels above the European or OIV maximal limits for drinking water or wine., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Air pollution has significant health effects worldwide, and airborne particles play a significant role in these effects. Ultrafine particles (UFPs) have an aerodynamic diameter of 0.1 μm or less, can penetrate deep into the respiratory tree, and are more toxic due to their large specific surface area, which should adsorb organic compounds. The aim of this study is to show the toxicological effects of UFPs with high organic content at low dose on BEAS-2B cells through at air-liquid interface (ALI) exposure using a Vitrocell® technology and a miniCAST (Combustion Aerosol Standard) generator. In conjunction with this approach, chemical analysis of particles and gas phase was performed to evaluate the presence of polycyclic aromatic hydrocarbons (PAHs). Chemical analyses confirmed the presence of PAHs in UFPs. With this experimental setup, exposure of the BEAS-2B cells induced neither cytotoxicity nor mitochondrial dysfunction. However, an increase of oxidative stress was observed, as assessed through Nrf2, NQO1, HO-1, CuZnSOD, MnSOD, and Catalase gene expression, together with significant induction of genes related to xenobiotic metabolism CYP1A1 and CYP1B1. Negative regulation of inflammatory genes expression (IL-6 and IL-8) was present three hours after the exposition to the UFPs. Taken together, this experimental approach, using repeatable conditions, should help to clarify the mechanisms by which organic UFPs induce toxicological effects., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Developing green and functional adsorbents for the removal of inorganic pollutants from industrial wastewater is still a great challenge. Activated carbons (ACs) are promising eco-friendly materials for adsorption applications. This study reports on the preparation and functionalization of AC and its application for fluoride removal from water. Activated carbon was prepared from date stems, and the material was employed as a support for different modifications such as incorporation of Al(OH) 3 , in situ dispersion of aluminum particles (Al 0 ) and grafting of 3-(aminopropyl)triethoxysilane (APTES). The resulting functional adsorbents were fully characterized by Fourier transform infrared spectroscopy, scanning electronic microscopy, energy dispersive X-ray fluorescence, X-ray diffraction, differential scanning calorimetry and zeta potential analysis. The results evidenced successful surface modifications. All adsorbents had affinity for the removal of fluoride ions (F - ). The highest F - removal rate was up to 20 mg g -1 for AC-Al(OH) 3 . Removal of fluoride ions obeyed Langmuir isotherms and a second-order kinetic model, and reached 99% uptake. The AC-Al(OH) 3 adsorbent was successfully used to treat a groundwater solution contaminated by fluoride ions. These results open an interesting avenue for developing eco-friendly functionalized AC for adsorption applications., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Leather industry plays an essential role in the world's economy; however, it also has a negative environmental impact due to the generation of significant quantities of wastes, some of which are classified as hazardous chemicals. Chrome tanning, the most popular tanning process, employs chromium salts, acids, and some other chemicals. Some dyes can be also a source of chromium. As a result, hexavalent chromium, a known carcinogenic and mutagenic, can be found in leather products and cause allergic dermatitis or trigger other diseases. For this reason, it is important to quantify the total amount of chromium in final leather goods, as well as the oxidation state in which this element is found. This paper aims to summarize chromium contamination due to the leather production processes, and to review the analytical methods that have been used to determine chromium's most abundant species: Cr(III) and Cr(VI) in leather and other matrices (foodstuffs, cosmetic products, environmental, and pharmaceutical samples). The international and European regulations are presented as well as the last academic developments to extract and quantify chromium species. The future outlook of pretreatment and quantification techniques are also discussed in this work, with a special focus on chromium interconversions.

Competitive and non-competitive batch experiments were conducted on flax fibers to study Zn 2+ , Cu 2+ , and Pb 2+ ions biosorption performance. Biosorption efficiency was dependent on contact time, pH, and biosorbent concentration. The results under competitive conditions were different from those obtained in non-competitive form. A high affinity of lead, with a selectivity sequence in general of Pb > Cu > Zn was observed. The biosorption data fitted very well the Langmuir model for lead in both types of solutions and for zinc and copper in the monometal form. The fit with the Freundlich model was not as successful, except for copper in the ternary system. Regarding zinc under competitive conditions, the sorption process was quite difficult and thus the equilibrium data could not fit well the adsorption models. The maximum adsorption capacities (mmol.kg -1 ) were respectively 112, 122 and 71, for Pb, Cu and Zn in the single metal ion solution and 82, 57 and 8 only in the ternary, showing thus a high competition between metal ions when added simultaneously. Overall, lead could still be efficiently removed in spite of the presence of other ions while zinc would be overcome in the presence of lead and copper., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The present work addresses the development of simple, low-cost and eco-friendly cocoa-shell-based materials for efficient removal of heavy metal hexavalent chromium (Cr(vi)), and toxic nitrate (NO 3 - ) from aqueous solution. A conventional treatment process was used to purify cocoa shell (CS) into an adsorbent, followed by chemical grafting of dendrimers to promote its surface properties for nitrate and Cr(vi) removal. The morphology, surface charge, structure and stability of the new adsorbent were investigated by scanning electron microscopy, Fourier transform infrared and UV-visible spectroscopies, zeta potential, X-ray photoelectron spectrometry, and differential scanning calorimetry. The successful chemical grafting of the dendrimer (polyethyleneimine, PEI) onto purified CS was confirmed. CS-T-PEI-P proved to be a very efficient candidate for the removal of nitrate and chromium(vi). Removal of the two pollutants at different initial concentrations and pH values was studied and discussed. Sorption of chromium and nitrate was found to obey 2 nd -order kinetics and a Freundlich-type isotherm, affording an uptake adsorption of 16.92 mg g -1 for NO 3 - and 24.78 mg g -1 for Cr(vi). These results open promising prospects for its potential applications as a low cost catalyst in wastewater treatment., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

mPEG-hexPLA micelles have shown their ability to improve delivery and cutaneous bioavailability of a wide range of poorly water soluble and lipophilic molecules. Although poorly water soluble, imiquimod (IMQ) is only moderately lipophilic and it was decided to investigate whether mPEG-hexPLA polymeric micelles could be used as a drug delivery system for this "less than ideal" candidate for encapsulation. Nanosized IMQ micelles (d n  = 27 nm) were formulated and characterized. Moreover, the innovative use of size exclusion chromatography allowed the exact drug localization inside the formulation to be determined; it appeared that the use of acetic acid to solubilize IMQ led to a higher IMQ content outside the micelle than inside. IMQ micelles (0.05%) were formulated in a gel using carboxymethyl cellulose (CMC). In vitro application of this formulation to porcine and human skin led to promising delivery results. IMQ deposition in human skin was 1.4 ± 0.4 µg/cm 2 while transdermal permeation was only 79 ± 19 ng/cm 2 : the formulation displayed >17-fold selectivity for cutaneous deposition over transdermal permeation. The optimized 0.05% gel significantly outperformed Aldara® cream (containing 5% IMQ) formulation in terms of delivery efficiency to human skin (2.85 ± 0.74% vs 0.04 ± 0.01%). Despite IMQ being only partially incorporated in the micelles, the biodistribution profile showed that the optimized 0.05% gel delivered as much as 518.2 ± 173.3 ng/cm 2 (1.04 ± 0.35% of the applied dose) to the viable epidermis and 236.4 ± 88.2 ng/cm 2 (0.47 ± 0.18% of the applied dose) to the upper dermis where the target antigen presenting cells reside. In contrast, for Aldara® cream, the delivery efficiencies in those layers were less than 0.02%. The optimal 0.05% gel thus allowed therapeutically relevant drug levels to be achieved in target tissues despite a 100-fold dose reduction., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Zebrafish-based platforms have recently emerged as a useful tool for toxicity testing as they combine the advantages of in vitro and in vivo methodologies. Nevertheless, the capacity to metabolically convert xenobiotics by zebrafish eleuthero embryos is supposedly low. To circumvent this concern, a comprehensive methodology was developed wherein test compounds (i.e., parathion, malathion and chloramphenicol) were first exposed in vitro to rat liver microsomes (RLM) for 1 h at 37 °C. After adding methanol, the mixture was ultrasonicated, placed for 2 h at -20 °C, centrifuged and the supernatant evaporated. The pellet was resuspended in water for the quantification of the metabolic conversion and the detection of the presence of metabolites using ultra high performance liquid chromatography-Ultraviolet-Mass (UHPLC-UV-MS). Next, three days post fertilization (dpf) zebrafish eleuthero embryos were exposed to the metabolic mix diluted in Danieau's medium for 48 h at 28 °C, followed by a stereomicroscopic examination of the adverse effects induced, if any. The novelty of our method relies in the possibility to quantify the rate of the in vitro metabolism of the parent compound and to co-incubate three dpf larvae and the diluted metabolic mix for 48 h without inducing major toxic effects. The results for parathion show an improved predictivity of the toxic potential of the compound.

A fast methodology to quantify 4-tert-octylphenol (4-t-OP) and 4-nonylphenol (4-NP) and their mono- and di-ethoxylates was developed, validated, and applied to real wastewater samples. Dispersive liquid-liquid microextraction was employed as a sample preparation step, leading to a pre-concentration factor of roughly 30. Analysis was carried out by liquid chromatography-tandem mass spectrometry with electrospray ionisation in multiple reaction monitoring mode. Average recoveries were generally between 80 and 120% for both the alkylphenols and their mono- and di-ethoxylates in influent and effluent wastewater. A minimum of 5 concentration levels per compound, ranging between 1 and 500 ng/mL, were prepared to construct calibration curves making use of isotopically labelled internal standards. The method presented good linearity and repeatability over the whole range of concentrations. Taking into account the concentration factor, and the recovery of the compounds, lower limits of quantification obtained in effluent wastewater were 0.04 ng/mL for 4-t-OP and 0.14 ng/mL for 4-NP, complying with European regulations, and between 0.03 ng/mL and 0.39 ng/mL for the ethoxylates. In influent wastewater, these limits were slightly higher. The total run time of 5 min for the alkylphenols and 8 min for the ethoxylates ensured high throughput. The developed method was applied to determine 4-t-OP and 4-NP and their mono- and di-ethoxylates in wastewater from several tank truck cleaning companies, which was subjected to ozonation and/or biological treatment. It was demonstrated that ozonation was best applied after the biological treatment, since in this case, the biological treatment could degrade most of the biodegradable organic matter, after which ozone could react directly with the recalcitrant organic pollutants. In this case, the concentrations of the target compounds in the wastewater of the investigated company decreased below the legally allowed concentration of the European water legislation.

New polar embedded aromatic stationary phases (mono- and trifunctional versions) that contain an amide-embedded group coupled with a tricyclic aromatic moiety were developed for chromatographic applications and described in the first paper of this series. These phases offered better separation performance for PAHs than for alkylbenzene homologues, and an enhanced ability to differentiate aromatic planarity to aromatic tridimensional conformation, especially for the trifunctional version and when using methanol instead of acetonitrile. In this second paper, a density functional theory study of the retention process is reported. In particular, it was shown that the selection of the suitable computational protocol allowed for describing rigorously the interactions that could take place, the solvent effects, and the structural changes for the monofunctional and the trifunctional versions. For the first time, the experimental data coupled with these DFT results provided a better understanding of the interaction mechanisms and highlighted the importance of the multimodal character of the designed stationary phases: alkyl spacers for interactions with hydrophobic solutes, amide embedded groups for dipole-dipole and hydrogen-bond interactions, and aromatic terminal groups for π-π interactions., (Copyright © 2017 Elsevier B.V. All rights reserved.)

New polar embedded aromatic stationary phases of different functionalities (mono- and trifunctional) and on different silica supports (Fully Porous Particle (FPP) and Superficially Porous Particle (SPP)) were synthesized to determine the impact of the functionality on the retention process and the selectivity towards aromatic compounds. A full experimental characterization was performed using a combination of techniques (elemental analysis, thermogravimetric measurements, infrared spectroscopy and solid-state NMR) to differentiate unambiguously the mono- and trifunctional Stationary Phases (SP). Commercially available columns with either an aromatic group or a polar embedded group were compared to the new stationary phases. The latter presented enhanced affinity for polycyclic aromatic hydrocarbons (PAH) structures compared to alkylbenzenes, especially when using methanol instead of acetonitrile as the organic modifier., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this article, we conduct a comprehensive molecular relaxation study of amorphous Quinidine above and below the glass-transition temperature (Tg) through broadband dielectric relaxation spectroscopy (BDS) experiments and theoretical density functional theory (DFT) calculations, as one major issue with the amorphous state of pharmaceuticals is life expectancy. These techniques enabled us to determine what kind of molecular motions are responsible, or not, for the devitrification of Quinidine. Parameters describing the complex molecular dynamics of amorphous Quinidine, such as Tg, the width of the α relaxation (βKWW), the temperature dependence of α-relaxation times (τα), the fragility index (m), and the apparent activation energy of secondary γ relaxation (Ea-γ), were characterized. Above Tg (> 60 °C), a medium degree of nonexponentiality (βKWW = 0.5) was evidenced. An intermediate value of the fragility index (m = 86) enabled us to consider Quinidine as a glass former of medium fragility. Below Tg (< 60 °C), one well-defined secondary γ relaxation, with an apparent activation energy of Ea-γ = 53.8 kJ/mol, was reported. From theoretical DFT calculations, we identified the most reactive part of Quinidine moieties through exploration of the potential energy surface. We evidenced that the clearly visible γ process has an intramolecular origin coming from the rotation of the CH(OH)C9H14N end group. An excess wing observed in amorphous Quinidine was found to be an unresolved Johari-Goldstein relaxation. These studies were supplemented by sub-Tg experimental evaluations of the life expectancy of amorphous Quinidine by X-ray powder diffraction and differential scanning calorimetry. We show that the difference between Tg and the onset temperature for crystallization, Tc, which is 30 K, is sufficiently large to avoid recrystallization of amorphous Quinidine during 16 months of storage under ambient conditions.

Three novel hydrophilic interaction chromatography columns packed with bare silica 2.6 μm superficially porous particles were evaluated. These stationary phases undergo a different pretreatment temperature (400, 525, and 900°C) that might influence their kinetic performance and thermodynamic properties. In the first instance, we demonstrated that the performance of these columns was inferior to the commercial ones in the low plate count range (10 000 plates), but was more favorable for N values beyond 40 000 plates. Thanks to its high permeability and reasonable flow resistance (φ = 695), together with a minimum reduced heights equivalent to a theoretical plate value of only 2.4, the stationary phase pretreated at 400°C was particularly attractive for N > 70 000 plates with a remarkably low impedance value (E = 2488). In a second step, the impact of pretreatment temperature was evaluated using two mixtures of polar substances, namely nucleobases and derivatives, as well as nicotine and derivatives. Retentions and selectivities achieved on the tested stationary phases were appropriate, but selectivity differences were minor when modifying pretreatment temperature from 400 to 525°C. When we increased the pretreatment temperature up to 900°C, the surface chemistry was more seriously modified. Finally, the columns presented a good stability even at high temperature (70°C), especially for the phases pretreated at 400 and 525°C., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This study reports the impact of thermal pretreatment between 400 and 1100°C on superficially porous silica particles (e.g. core-shell, fused-core; here abbreviated as SPP silica). The different thermally pretreated SPP silica (400°C, 900°C and 1100°C) were chemically bonded with an octadecyl chain under microwave irradiation. The bare SPP silica, thermally untreated and pretreated, as well as the chemically bonded phases (CBPs) were fully characterized by elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and solid state cross polarization magic angle spinning (CP-MAS) (29)Si NMR. The chromatographic properties of the overall set of C18-thermally pretreated SPP silica stationary phases were determined using the Tanaka test. Complementary, the simplified Veuthey test was used to deeply study the silanol activity, considering a set of 7 basic solutes with various physicochemical properties. Both tests were also performed on different commercial SPP silica columns and different types of bonding chemistry (C18, Phenyl-hexyl, RP-amide, C30, aQ). Multivariate data analyses (hierarchical cluster analysis and principal component analysis) were carried out to define groups of stationary phases with similar chromatographic properties and situate them in relation to those commercially available. These different C18-thermally pretreated SPP silicas represented a wide range of stationary phases as they were spread out along the score plot. Moreover, this study highlighted that the thermal pretreatment improved the chemical stability of the SPP silica compare to untreated SPP silica and untreated porous silica. Consequently, higher thermal pretreatment can be applied (up to 900°C) before functionalization without destruction of the silica matrix. Indeed, a significantly lower dissolution of the thermally pretreated SPP silica under aggressive conditions could allow the use of the corresponding functionalized stationary phases at high temperature (60°C) with good lifetime of the columns., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Bulimia nervosa is an eating disorder associating binge eating with inappropriate compensatory methods. Patients suffer from multiple organic, psychological and social complications. Of these, the somatic consequences are numerous and of varying degrees of seriousness. Regular monitoring is therefore essential in order to identify them and treat them., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)