Search

International audience; The advent of multi-PW laser facilities world-wide opens new opportunities for nuclear physics. With this perspective, we developed a neutron counter taking into account the specifics of a high-intensity laser environment. Using GEANT4 simulations and prototype testings, we report on the design of a modular neutron counter based on boron-10 enriched scintillators and a high-density polyethylene moderator. This detector has been calibrated using a plutonium-beryllium neutron source and commissioned during an actual neutron-producing laser experiment at the LULI2000 facility (France). An overall efficiency of 4.37(59)% has been demonstrated during calibration with a recovery time of a few hundred microseconds after laser-plasma interaction.

The advent of multi-PW laser facilities world-wide opens new opportunities for nuclear physics. With this perspective, we developed a high efficiency neutron counter taking into account the specifics of a high intensity laser environment. Using GEANT4 simulations and prototype testings, we report on the design of a modular neutron-counter based on boron-10 enriched scintillators and high-density polyethylene moderator. This detector has been calibrated using a plutonium-beryllium neutron source and commissioned during an actual neutrons producing laser experiment at theLULI2000 facility (France). An overall efficiency of 4.37(59)% has been demonstrated during calibration with a recovery time of a few hundreds microseconds after laser-plasma interaction. We also tested using units of this detector in neutron time-of-flight configuration during the commissioning of the 1PW arm of the Apollon laser facility. Neutrons produced by the conversion of proton accelerated by the 1PW arm of the Apollon facility have been detected, of which we will present preliminary results.

The development, characterization and implementation of a water (H 2 O) droplet source for laser–plasma interactions at high-repetition rates are reported. The system is capable of generating a continuous stream of water droplets for several hours and was tested to operate continuously as a target source. Based on glass capillaries, a detailed parameter scan on the automated pulling process is presented, allowing a fine-tuning of the shape of the capillaries and therefore the diameter of the droplets.

An experimental platform was designed to study the effects of laser accelerated protons (LAPs) on mammalian cells. The protons, in the MeV energy range, originate from the rear side of a thin 5 µm Ti foil target following the interaction with a high power laser pulse and are accelerated by the target normal sheath mechanism. A tape Ti foil target was developed, allowing a shot repetition rate of up to 5 Hz, which corresponds to the rate of the laser system. A dipole magnet arrangement was used for energy dispersion and to separate the proton burst from electrons and x rays. The absorbed radiation dose at the cell port was measured with CR39 plastic detectors and calibrated imaging plates. An epifluorescence microscope with compact open-beam optics was developed to image live cells and their spatiotemporal properties during and after irradiation. To demonstrate the functionality of all components of the platform, biological proof of concept experiments were carried out using two suspension (Jurkat and Ramos) and two adherent (HeLa and A-549) cell lines. A multitude of biological procedures and analytical techniques were established on-site or in laboratories nearby. For example, we analyzed DNA double-strand break (DSB) induction and repair by detecting the γH2A.X signal by fluorescence microscopy and flow cytometry. The observed dose-dependent increase in DSB induction confirms that DNA damage is induced in cells after exposure to LAPs. CA extern

Collective processes in plasmas often induce microinstabilities that play an important role in many space or laboratory plasma environments. Particularly notable is the Weibel-type current filamentation instability, which is believed to drive the creation of collisionless shocks in weakly magnetized astrophysical plasmas. Here, this instability class is studied through interactions of ultraintense and short laser pulses with solid foils, leading to localized generation of megaelectronvolt electrons. Proton radiographic measurements of both low- and high-resistivity targets show two distinct, superimposed electromagnetic field patterns arising from the interpenetration of the megaelectronvolt electrons and the background plasma. Particle-in-cell simulations and theoretical estimates suggest that the collisionless Weibel instability building up in the dilute expanding plasmas formed at the target surfaces causes the observed azimuthally symmetric electromagnetic filaments. For a sufficiently high resistivity of the target foil, an additional resistive instability is triggered in the bulk target, giving rise to radially elongated filaments. The data reveal the growth of both filamentation instabilities over large temporal (tens of picoseconds) and spatial (hundreds of micrometres) scales. In the interaction of ultraintense, short laser pulses with solid targets, the collisionless Weibel instability is observed. For a sufficiently high resistivity of the target, an additional resistive instability appears.

We report on a detailed experimental and numerical study on the boosted acceleration of protons from ultra-thin hemispherical targets utilizing multi-Joule short-pulse laser-systems. For a laser intensity of 1 × 1020 W/cm2 and an on-target energy of only 1.3 J with this setup a proton cut-off energy of 8.5 MeV was achieved, which is a factor of 1.8 higher compared to a flat foil target of the same thickness. While a boost of the acceleration process by additionally injected electrons was observed for sophisticated targets at high-energy laser-systems before, our studies reveal that the process can be utilized over at least two orders of magnitude in intensity and is therefore suitable for a large number of nowadays existing laser-systems. We retrieved a cut-off energy of about 6.5 MeV of proton energy per Joule of incident laser energy, which is a noticeable enhancement with respect to previous results employing this mechanism. The approach presented here has the advantage of using structure-wise simple targets and being sustainable for numerous applications and high repetition rate demands at the same time.

An investigation of the electromagnetic (EM) pulse produced by high intensity laser-solid interactions has been carried out by employing the proton probing technique. Laser parameters including energy, pulse duration, and intensity were varied to investigate the influence on the EM pulse amplitude. The data reveal that the amplitude of the EM pulse depends on the incident laser energy and the pulse duration. The optimum pulse length for a given laser energy is found to be close to 100 fs. The net charge associated with the traveling EM pulse has been found to be dependent on the laser intensity, in a good agreement with a semiempirical model. The understanding of the EM pulse is important for the postacceleration of laser driven proton beams.An investigation of the electromagnetic (EM) pulse produced by high intensity laser-solid interactions has been carried out by employing the proton probing technique. Laser parameters including energy, pulse duration, and intensity were varied to investigate the influence on the EM pulse amplitude. The data reveal that the amplitude of the EM pulse depends on the incident laser energy and the pulse duration. The optimum pulse length for a given laser energy is found to be close to 100 fs. The net charge associated with the traveling EM pulse has been found to be dependent on the laser intensity, in a good agreement with a semiempirical model. The understanding of the EM pulse is important for the postacceleration of laser driven proton beams.

Laser irradiation of solid targets can drive short and high-charge relativistic electron bunches over micron-scale acceleration gradients. However, for a long time, this technique was not considered a viable means of electron acceleration due to the large intrinsic divergence (∼50° half-angle) of the electrons. Recently, a reduction in this divergence to 10°–20° half-angle has been obtained, using plasma-based magnetic fields or very high contrast laser pulses to extract the electrons into the vacuum. Here we show that we can further improve the electron beam collimation, down to ∼1.5° half-angle, of a high-charge (6 nC) beam, and in a highly reproducible manner, while using standard stand-alone 100 TW-class laser pulses. This is obtained by embedding the laser-target interaction in an external, large-scale (cm), homogeneous, extremely stable, and high-strength (20 T) magnetic field that is independent of the laser. With upcoming multi-PW, high repetition-rate lasers, this technique opens the door to achieving even higher charges (>100 nC).Laser irradiation of solid targets can drive short and high-charge relativistic electron bunches over micron-scale acceleration gradients. However, for a long time, this technique was not considered a viable means of electron acceleration due to the large intrinsic divergence (∼50° half-angle) of the electrons. Recently, a reduction in this divergence to 10°–20° half-angle has been obtained, using plasma-based magnetic fields or very high contrast laser pulses to extract the electrons into the vacuum. Here we show that we can further improve the electron beam collimation, down to ∼1.5° half-angle, of a high-charge (6 nC) beam, and in a highly reproducible manner, while using standard stand-alone 100 TW-class laser pulses. This is obtained by embedding the laser-target interaction in an external, large-scale (cm), homogeneous, extremely stable, and high-strength (20 T) magnetic field that is independent of t...

The divergent and broadband proton beams produced by the target normal sheath acceleration mechanism provide the unique opportunity to probe, in a point-projection imaging scheme, the dynamics of the transient electric and magnetic fields produced during laser-plasma interactions. Commonly such experimental setup entails two intense laser beams, where the interaction produced by one beam is probed with the protons produced by the second. We present here experimental studies of the ultra-fast charge dynamics along a wire connected to laser irradiated target carried out by employing a 'self proton probing arrangement i.e. by connecting the wire to the target generating the probe protons. The experimental data shows that an electromagnetic pulse carrying a significant amount of charge is launched along the wire, which travels as a unified pulse of 10s of ps duration with a velocity close to speed of light. The experimental capabilities and the analysis procedure of this specific type of proton probing technique are discussed. (C) 2016 Elsevier B.V. All rights reserved.

The role of the radiation pressure of an intense laser beam in the formation of proton and carbon spectra from thin foils is discussed. The data presented suggests that, in competition with the Target Normal Sheath Acceleration mechanism, the onset of the Light Sail (LS) region of Radiation Pressure Acceleration can be obtained for suitably thin targets at currently available laser intensities,. The spectral features and their scaling with the laser and target parameters are consistent with the scenario of Light Sail (LS) acceleration.

The propagation of fast electron currents in near solid-density media was investigated via proton probing. Fast currents were generated inside dielectric foams via irradiation with a short ($\ensuremath{\sim}0.6\text{ }\text{ }\mathrm{ps}$) laser pulse focused at relativistic intensities ($I{\ensuremath{\lambda}}^{2}\ensuremath{\sim}4\ifmmode\times\else\texttimes\fi{}{10}^{19}\text{ }\text{ }\mathrm{W}\text{ }{\mathrm{cm}}^{\ensuremath{-}2}\text{ }\ensuremath{\mu}{\mathrm{m}}^{2}$). Proton probing provided a spatially and temporally resolved characterization of the evolution of the electromagnetic fields and of the associated net currents directly inside the target. The progressive growth of beam filamentation was temporally resolved and information on the divergence of the fast electron beam was obtained. Hybrid simulations of electron propagation in dense media indicate that resistive effects provide a major contribution to field generation and explain well the topology, magnitude, and temporal growth of the fields observed in the experiment. Estimations of the growth rates for different types of instabilities pinpoints the resistive instability as the most likely dominant mechanism of beam filamentation.

The generation of high-order harmonics in ultraviolet spectral range by targets of periodic modulation interacting with relativistic, high contrast laser pulse (Iλ2= 1020W/cm2· μm2) was investigated experimentally and numerically. The spectral intensity of the 2nd- and 3rd-order harmonic emission from grating of different periodicities (250, 410, and 480 nm) is presented. The enhancement of the 3rd harmonic order compared with 2nd was observed for a grating of 480 nm periodicity. The experimental results indicate the role of the grating periodicity on the emission efficiency of different higher order harmonics in the UV spectral range. The higher order harmonics are emitted at the grating surface separated from the specular reflection of the laser pulse, due of the interference effects. In addition, 2D numerical PIC simulations demonstrate a complex angular distribution of the higher harmonics (HH) spectral intensity and confirm the strong dependence of the HH efficiency of a specific order on the grating periodicity, as observed experimentally. These special features of the high harmonic emission by periodically modulated targets open the route toward the control of HH spectral composition and of the emission efficiency of the lower order harmonics.

With the latest configuration, the Ti:Sa laser system ARCTURUS (Düsseldorf University, Germany) operates with a double-chirped pulse amplification (CPA) architecture delivering pulses with an energy of 7 J before compression in each of the two high-power beams. By the implementation of a plasma mirror system, the intrinsic laser contrast is enhanced up to $10^{-12}$ on a time scale of hundreds of picoseconds, before the main peak. The laser system has been used in various configurations for advanced experiments and different studies have been carried out employing the high-power laser beams as a single, high-intensity interaction beam ( $I\approx 10^{20}~\text{W}/\text{cm}^{2}$ ), in dual- and multi-beam configurations or in a pump–probe arrangement.

Magnetized laser-produced plasmas are central to many novel laboratory astrophysics and inertial confinement fusion studies, as well as in industrial applications. Here we provide the first complete description of the three-dimensional dynamics of a laser-driven plasma plume expanding in a 20 T transverse magnetic field. The plasma is collimated by the magnetic field into a slender, rapidly elongating slab, whose plasma-vacuum interface is unstable to the growth of the "classical", fluid-like magnetized Rayleigh-Taylor instability., Comment: Accepted for publication in Physical Review Letters

International audience; Power amplification and pulse compression of short-pulse laser beams by three-wave nonlinear processes in a plasma was proposed by Malkin, Shvets, and Fisch [Phys. Rev. Lett. 82, 4448 (1999)] as a potential path to exceed the limits of the highly successful technique of chirped pulse amplification [D. Strickland and G. Mourou, Opt. Commun. 56, 219 (1985)] developed three decades ago. The parametric processes considered, Raman and Brillouin scattering, are notoriously difficult to control and to predict theoretically because of the dependence on plasma properties and other nonlinear processes. Previous experiments of backward Raman and Brillouin amplifiers have fallen far short of the predictions of simulations and theory and achieved only a very small energy transfer. In this paper, laser-plasma amplification of subpicosecond pulses above the Joule level is demonstrated with a large energy transfer and a very high efficiency, up to 20%, a major milestone for this scheme to become a solution for the next generation of ultrahigh-intensity lasers. In addition, three-dimensional simulations of the amplification process quantitatively match the experimental results and demonstrate the ability of predictive simulations for the optimization of experiments. The global behavior of the amplification process is reproduced, including the evolution of the spatial profile of the amplified seed, the pulse length of the amplified seed, and the influence of parasitic spontaneous Raman and Brillouin scattering.

A new type of proton acceleration stemming from large-scale gradients, low-density targets, irradiated by an intense near-infrared laser is observed. The produced protons are characterized by high-energies (with a broad spectrum), are emitted in a very directional manner, and the process is associated to relaxed laser (no need for high-contrast) and target (no need for ultra-thin or expensive targets) constraints. As such, this process appears quite effective compared to the standard and commonly used Target Normal Sheath Acceleration technique (TNSA), or more exploratory mechanisms like Radiation Pressure Acceleration (RPA). The data are underpinned by 3D numerical simulations which suggest that in these conditions a Low Density Collisionless Shock Acceleration (LDCSA) mechanism is at play, which combines an initial Collisionless Shock Acceleration (CSA) to a boost procured by a TNSA-like sheath field in the downward density ramp of the target, leading to an overall broad spectrum. Experiments performed at a laser intensity of 1020 W/cm2 show that LDCSA can accelerate, from ~1% critical density, mm-scale targets, up to 5 × 109 protons/MeV/sr/J with energies up to 45(±5) MeV in a collimated (~6° half-angle) manner.

The collimation of astrophysically-relevant plasma ejecta in the form of narrow jets via a poloidal magnetic field is studied experimentally by irradiating a target situated in a 20 T axial magnetic field with a 40 J, 0.6 ns, 0.7 mm diameter, high-power laser. The dynamics of the plasma shaping by the magnetic field are studied over 70 ns and up to 20 mm from the source by diagnosing the electron density, temperature and optical self-emission. These show that the initial expansion of the plasma is highly magnetized, which leads to the formation of a cavity structure when the kinetic plasma pressure compresses the magnetic field, resulting in an oblique shock [A. Ciardi et al., Phys. Rev. Lett. 110, 025002 (2013)]. The resulting poloidal magnetic nozzle collimates the plasma into a narrow jet [B. Albertazzi et al., Science 346, 325 (2014)]. At distances far from the target, the jet is only marginally magnetized and maintains a high aspect ratio due to its high Mach-number (M∼20) and not due to external magnetic pressure. The formation of the jet is evaluated over a range of laser intensities (1012–1013 W/cm2), target materials and orientations of the magnetic field. Plasma cavity formation is observed in all cases and the viability of long-range jet formation is found to be dependent on the orientation of the magnetic field.

A high-repetition rate laser-driven proton source from a continuously operating cryogenic hydrogen cluster target is presented. We demonstrate a debris-free, Coulomb-explosion based acceleration in the 10s of kilo-electron-volt range with a stability of about 10% in a 5 Hz operation. This acceleration mechanism, delivering short pulse proton bursts, represents an ideal acceleration scheme for various applications, for example, in materials science or as an injector source in conventional accelerators. Furthermore, the proton energy can be tuned by varying the laser and/or cluster parameters. 3D numerical particle-in-cell simulations and an analytical model support the experimental results and reveal great potential for further studies, scaling up the proton energies, which can be realized with a simple modification of the target.A high-repetition rate laser-driven proton source from a continuously operating cryogenic hydrogen cluster target is presented. We demonstrate a debris-free, Coulomb-explosion based acceleration in the 10s of kilo-electron-volt range with a stability of about 10% in a 5 Hz operation. This acceleration mechanism, delivering short pulse proton bursts, represents an ideal acceleration scheme for various applications, for example, in materials science or as an injector source in conventional accelerators. Furthermore, the proton energy can be tuned by varying the laser and/or cluster parameters. 3D numerical particle-in-cell simulations and an analytical model support the experimental results and reveal great potential for further studies, scaling up the proton energies, which can be realized with a simple modification of the target.

The design and operation of an online energy and spatially resolving detector based on three different scintillators for laser-driven protons are described. The device can be used for a multi-Hertz recording rate. The spatial resolution is

A continuous cryogenic hydrogen cluster-jet target has been developed for laser-plasma interaction studies, in particular as a source for the acceleration of protons. Major advantages of the cluster-jet target are the compatibility with pulsed high repetition lasers and the absence of debris. The cluster-jet target was characterized using the Mie-scattering technique allowing to determine the cluster size and to compare it with an empirical prediction. In addition, an estimation of the cluster beam density was performed. The system was implemented at the high power laser system ARCTURUS and first successful measurements show the acceleration of protons after irradiation by high intensity laser pulses with a repetition rate of five Hertz., Comment: 9 pages, 7 figures

The ultrafast charge dynamics following the interaction of an ultra-intense laser pulse with a foil target leads to the launch of an ultra-short, intense electromagnetic (EM) pulse along a wire connected to the target. Due to the strong electric field (of the order of $\text{GV m}^{-1}$ ) associated to such laser-driven EM pulses, these can be exploited in a travelling-wave helical geometry for controlling and optimizing the parameters of laser accelerated proton beams. The propagation of the EM pulse along a helical path was studied by employing a proton probing technique. The pulse-carrying coil was probed along two orthogonal directions, transverse and parallel to the coil axis. The temporal profile of the pulse obtained from the transverse probing of the coil is in agreement with the previous measurements obtained in a planar geometry. The data obtained from the longitudinal probing of the coil shows a clear evidence of an energy dependent reduction of the proton beam divergence, which underpins the mechanism behind selective guiding of laser-driven ions by the helical coil targets.

We report on the experimental observation of the instability of a plasma shell, which formed during the expansion of a laser-ablated plasma into a rarefied ambient medium. By means of a proton radiography technique, the evolution of the instability is temporally and spatially resolved on a timescale much shorter than the hydrodynamic one. The density of the thin shell exceeds that of the surrounding plasma, which lets electrons diffuse outward. An ambipolar electric field grows on both sides of the thin shell that is antiparallel to the density gradient. Ripples in the thin shell result in a spatially varying balance between the thermal pressure force mediated by this field and the ram pressure force that is exerted on it by the inflowing plasma. This mismatch amplifies the ripples by the same mechanism that drives the hydrodynamic nonlinear thin-shell instability (NTSI). Our results thus constitute the first experimental verification that the NTSI can develop in colliding flows. Funding agencies: EPSRC [EP/I031766/1, EP/K022415/1, EP/I029206/1, SFB-TR18, GRK1203, ENE2013-45661-C2-1-P, PEII-2014-008-P]; Vetenskapsradet [Dnr 2010-4063]; Triangle de la Physique RTRA network (ULIMAC)

We report on the successful operation of a newly developed cryogenic jet target at high intensity laser-irradiation. Using the frequency-doubled Titan short pulse laser system at Jupiter Laser Facility, Lawrence Livermore National Laboratory, we demonstrate the generation of a pure proton beam a with maximum energy of 2 MeV. Furthermore, we record a quasi-monoenergetic peak at 1.1 MeV in the proton spectrum emitted in the laser forward direction suggesting an alternative acceleration mechanism. Using a solid-density mixed hydrogen-deuterium target, we are also able to produce pure proton-deuteron ion beams. With its high purity, limited size, near-critical density, and high-repetition rate capability, this target is promising for future applications.

Laser-driven ion acceleration is of great interest across a range of disciplines with potential applications including the fast ignition approach to inertial confinement fusion and proton therapy. The most robust acceleration mechanisms studied to date however, based on target normal sheath acceleration (TNSA), do not satisfy the emittance, flux and ion energy requirements for direct applications.

As part of the ultrafast charge dynamics initiated by high intensity laser irradiations of solid targets,high amplitude EM pulses propagate away from the interaction point and are transported along anystalks and wires attached to the target. The propagation of these high amplitude pulses along a thinwire connected to a laser irradiated target was diagnosed via the proton radiography technique,measuring a pulse duration of 20 ps and a pulse velocity close to the speed of light. The strongelectric field associated with the EM pulse can be exploited for controlling dynamically the protonbeams produced from a laser-driven source. Chromatic divergence control of broadband laser drivenprotons (upto 75% reduction in divergence of >5 MeV protons) was obtained by winding the supportingwire around the proton beam axis to create a helical coil structure. In addition to providingfocussing and energy selection, the technique has the potential to post-accelerate the transiting protonsby the longitudinal component of the curved electric field lines produced by the helical coil lens.

Investigations of energy transfer of high intensity (I = 5 × 1019 W/cm2), ultrashort (

Ultra-short proton pulses originating from laser-plasma accelerators can provide instantaneous dose rates at least 107-fold in excess of conventional, continuous proton beams. The impact of such extremely high proton dose rates on A549 human lung cancer cells was compared with conventionally accelerated protons and 90 keV X-rays. Between 0.2 and 2 Gy, the yield of DNA double strand breaks (foci of phosphorylated histone H2AX) was not significantly different between the two proton sources or proton irradiation and X-rays. Protein nitroxidation after 1 h judged by 3-nitrotyrosine generation was 2.5 and 5-fold higher in response to conventionally accelerated protons compared to laser-driven protons and X-rays, respectively. This difference was significant (p

The dynamics of self-generated magnetic B-fields produced following the interaction of a high contrast, high intensity (I > 1019W cm-2) laser beam with thin (3 μm thick) solid (Al or Au) targets is investigated experimentally and numerically. Two main sources drive the growth of B-fields on the target surfaces. B-fields are first driven by laser-generated hot electron currents that relax over ∼10-20 ps. Over longer timescales, the hydrodynamic expansion of the bulk of the target into vacuum also generates B-field induced by non-collinear gradients of density and temperature. The laser irradiation of the target front side strongly localizes the energy deposition at the target front, in contrast to the target rear side, which is heated by fast electrons over a much larger area. This induces an asymmetry in the hydrodynamic expansion between the front and rear target surfaces, and consequently the associated B-fields are found strongly asymmetric. The sole long-lasting (>30 ps) B-fields are the ones growing on the target front surface, where they remain of extremely high strength (∼8-10 MG). These B-fields have been recently put by us in practical use for focusing laser-accelerated protons [B. Albertazzi et al., Rev. Sci. Instrum. 86, 043502 (2015)]; here we analyze in detail their dynamics and structure.

The production of neutron beams having short temporal duration is studied using ultraintense laser pulses. Laser-accelerated protons are spectrally filtered using a laser-triggered microlens to produce a short duration neutron pulse via nuclear reactions induced in a converter material (LiF). This produces a similar to 3 ns duration neutron pulse with 10(4) n/MeV/sr/shot at 0.56 m from the laser-irradiated proton source. The large spatial separation between the neutron production and the proton source allows for shielding from the copious and undesirable radiation resulting from the laser-plasma interaction. This neutron pulse compares favorably to the duration of conventional accelerator sources and should scale up with, present and future, higher energy laser facilities to produce brighter and shorter neutron beams for ultrafast probing of dense materials.

Based on the analysis of data from the numerous dedicated experiments on plasma disruptions in the TEXTOR tokamak the mechanisms of the formation of runaway electron (RE) beams and their losses are proposed. The plasma disruption is caused by a strong stochastic magnetic field formed due to nonlinearly excited low-mode-number magneto-hydro-dynamics (MHD) modes. It is hypothesized that the RE beam is formed in the central plasma region confined by an intact magnetic surface due to the acceleration of electrons by the inductive toroidal electric field. In the case of plasmas with the safety factor $q(0) the most stable RE beams are formed by the outermost intact magnetic surface located between the magnetic surface $q=1$ and the closest low-order rational surface $q=m/n>1~(q=5/4,q=4/3,\dots )$. The thermal quench (TQ) time caused by the fast electron transport in a stochastic magnetic field is calculated using the collisional transport model. The current quench (CQ) stage is due to the particle transport in a stochastic magnetic field. The RE beam current is modelled as a sum of a toroidally symmetric part and a small-amplitude helical current with a predominant $m/n=1/1$ component. The REs are lost due to two effects: (i) by outward drift of electrons in a toroidal electric field until they touch the wall and (ii) by the formation of a stochastic layer of REs at the beam edge. Such a stochastic layer for high-energy REs is formed in the presence of the $m/n=1/1$ MHD mode. It has a mixed topological structure with a stochastic region open to the wall. The effect of external resonant magnetic perturbations on RE loss is discussed. A possible cause of the sudden MHD signals accompanied by RE bursts is explained by the redistribution of runaway current during the resonant interaction of high-energetic electron orbits with the $m/n=1/1$ MHD mode.

Recent theoretical and experimental studies suggest the possibility of enhancing the efficiency and ease of laser acceleration of protons and ions using underdense or near critical plasmas through electrostatic shocks. Very promising results were recently obtained in this regime. In these experiments, a first ns pulse was focused on a thin target to explode it and a second laser with a high intensity was focused on the exploded foil. The delay between two lasers allowed to control the density gradient seen by the second laser pulse. The transition between various laser ion acceleration regimes depending on the density gradient length was studied. With a laser energy of a few Joules, protons with energies close to the energies of TNSA accelerated protons were obtained for various exploded foils configurations. In the high energy regime (~180 J), protons with energies significantly higher than the ones of TNSA accelerated protons were obtained when exploding the foil while keeping a good beam quality. These results demonstrate that low-density targets are promising candidates for an efficient proton source that can be optimized by choosing appropriate plasma conditions. New experiments were also performed in this regime with gas jets. Scaling shock acceleration in the low density regime to ultra high intensities is a challenge as radiation losses and electron positron pair production change the optimization of the shock process. Using large-scale Particle-In-Cell simulations, the transition to this regime in which intense beams of relativistic ions can be produced is investigated.

Laser driven proton beams driven by the Target Normal Sheath Acceleration (TNSA) mechanism exhibit large divergence and a broad energy distribution with low particle number at high energy. Such undesirable characteristics of the beam can be controlled and optimised by employing a recently developed helical coil technique, which exploits the transient self-charging of solid targets irradiated by intense laser pulses. Highly chromatic focusing of the broadband proton beams was achieved by employing this technique at the TARANIS laser system, where the selected energy slice was tuned by varying the pitch of the coil. Using a longer coil of larger pitch, a quasi-collimated, narrow energy band proton beam of ~10^7 particles at 10 MeV was achieved, through a combination of focussing, energy selection and in-situ post-acceleration. This technique may provide a platform for the next generation of compact, all-optical ion accelerators.

The loss of runaway electrons during an induced disruption is recorded by a synchrotron imaging technique using a fast infrared CCD camera. The loss is predominantly diffuse. During the “spiky-loss phase”, when the runaway beam moves close to the wall, a narrow channel between the runaway column and a scintillator probe is formed and lasts until the runaway beam is terminated. In some cases, the processed images show a stripe pattern at the plasma edge. A comparison between the MHD dominated disruptions and the MHD-free disruption is performed. A new mechanism of plasma disruptions with the runaway electron generation and a novel model which reproduces many characteristic features of the plasma beam evolution during a disruption is briefly described.

Ultra-intense lasers can nowadays routinely accelerate kiloampere ion beams. These unique sources of particle beams could impact many societal (e.g., proton-therapy or fuel recycling) and fundamental (e.g., neutron probing) domains. However, this requires overcoming the beam angular divergence at the source. This has been attempted, either with large-scale conventional setups or with compact plasma techniques that however have the restriction of short (50 ps), thermoelectric multi-megagauss surface magnetic (B)-fields, compact capturing, and focusing of a diverging laser-driven multi-MeV ion beam can be achieved over a wide range of ion energies in the limit of a 5° acceptance angle.